Computational flow imaging (CFI) is a new field of research in computational flow dynamics. It combines computational and experimental flow dynamics, together with visualization techniques.
计算流动显示是近年来在流体力学领域出现的一个新的研究方向，是计算流体力学、实验流体力学和科学计算可视化等领域的结合。
The method for prediction the meter factor of the turbine flow meter by the computational fluid dynamics (CFD) software package (FLUENT) is put forward.
提出了利用计算流体力学(CFD)软件(FLUENT)进行涡轮流量传感器仪表系数预测的方法。
This paper is an application of Computational Fluid Dynamics in the turbulent flow of a three-dimensional air-conditioned room in which there are heat sources.
本文应用计算流体力学的理论和方法模拟了带内热源的三维空调房间室内气流的湍流流动。
The commercial code of CFD (Computational Fluid Dynamics), FLUENT-5, has been used to numerically simulate the flow field in the draft-tube agitated tank.
利用计算流体力学软件FLUENT-5，对带导流筒搅拌槽内的流场进行了数值模拟。
A two-dimension model for the flow field in catalytic converter was established, and the steady state flow was simulated with the computational fluid dynamics (CFD) code.
利用计算流体动力学(CFD)软件，建立了催化转化器流场的二维模型，对催化转化器的稳态流动进行了数值模拟。
Based on the computational fluid dynamics, a design method for flow meter is given through numerical simulation and experiment on metal tube rotameter with special structure fixed on the level piping.
通过对适合安装于水平管道的特殊结构的金属管浮子流量计三维湍流流场的数值仿真及实验研究提出一种基于计算流体力学的流量传感器设计方法。
On the basis of computational fluid dynamics (CFD), adopting limited volume method, the external flow field of a car body is simulated.
以计算流体力学(CFD)为基础，采用有限容积法模拟计算了轿车车身的外部流场。
Three dimensional annular seal flow field was simulated quasi-steadily with computational fluid dynamics (CFD) method in a rotating reference frame. The Rotordynamic coefficients were calculated.
应用计算流体力学(CFD)方法对转动坐标系下的三维环形密封流场进行了准稳态数值模拟，在此基础上进行了转子动力系数的计算。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
The detailed distribution of pressure and velocity on the cone obtained after simulating the flow characteristics of a V-cone flowmeter with the computational fluid dynamics (CFD) method is analysed.
运用计算流体力学(CFD)方法，对V锥流量计进行了数值模拟，得到了锥体上的压力和速度的详细分布情况，并对其进行了分析。
Making use of computational fluid dynamics method and dynamic simulation, the thesis studies the effects of jet flow on launch process of vehicular container-type missile.
结合流场计算和发射动力学仿真，研究某型车载发射系统中燃气流对发射过程的影响。
The profile meshed by some computational fluid dynamics (CFD) software is used to simulate the blood flow within aneurysm.
方法采用计算瘤体力学（CFD）软件结合顶端动脉瘤的医学影像，对动脉瘤内血液流动行数值模拟。
In this paper, ion-exchange membrane used for EDI is studied, and flow field distribution modeling of dilute chamber with computational fluid dynamics (CFD) software is studied for the first time.
本文主要对EDI设备中的离子交换膜进行研究，并首次采用计算流体力学(CFD)软件对淡水室隔板的流场分布进行模拟。
The numerical simulation on fluid flow in cooling water jacket of 498 diesel engine is performed using computational fluid dynamics (CFD) software FLUENT.
应用CFD模拟分析软件FLUENT对498发动机冷却水套内的流场进行模拟计算，研究分析了水泵内流场对发动机内冷却水流动的影响。
The three dimensional flow field of the step cylinder in Hydraulic Control Rod Driving System (HCRDS) is calculated and analyzed with the computational fluid (dynamics) program CFX5 in detail.
应用计算流体力学程序CFX5对水力驱动控制棒步进缸内部的三维流场进行了计算和分析。
In this paper, the process of the liquid flow on the heat tube surface was carried out using computational fluid dynamics (CFD) simulation method.
采用计算流体力学方法(CFD)，对传热管外液体流动过程进行了模拟研究。
A computational fluid dynamics model was used to simulate the flow field of catalytic converter, and which was compared with the experimental results as to demonstrate the model validation.
通过采用计算流体力学数学模型对催化转化器内流场的数值模拟，并与实验结果进行比较，验证了模型的准确性。
Based on computational fluid dynamics, the distribution of laminar flow-field and pressure difference are obtained by numerical simulation on flow through orifice plate in detail.
以计算流体力学为工具，详细分析计算了流体流过孔板的层流流场分布以及压力降。
The flow field around a car is simulated with the method of computational fluid dynamics (CFD) in this paper. Some aerodynamic parameters are obtained.
应用计算流体力学(CFD)方法计算模拟轿车三维外流场，得出模拟计算结果。
The possible benefits of the technique of computational fluid dynamics (CFD) used in car body flow-field analysis is highlighted.
探求了应用计算流体力学（CFD）研究汽车车身外部流场的可行性。
This paper is an application of Computational Fluid Dynamics in the turbulent flow of three-dimensional air-conditioned room.
本论文应用计算流体力学的理论和方法模拟三维较复杂条件下空调房间室内空气流场的湍流流动。
The simulation and optimization of solution flow in the cup by computational fluid dynamics(CFD)tool have been introduced in this paper. The results have been successfully used for the machine design.
对匀流板的形状和位置进行了计算机模拟和优化，并实际应用于喷镀装置中，取得了很好结果。
In the text the internal flow of cross-flow fan is simulated with Computational Fluid Dynamics.
本文利用计算流体力学方法对空调器贯流风机系统内部气体流动进行了数值模拟；
The computational fluid dynamics software FLUENT is used to simulate the 3-d two-phase (gas-solid) flow of cyclone separator.
应用计算流体力学软件FLUENT对旋风分离器进行三维气固两相流场的数值模拟。
Computational fluid dynamics method is applied to investigate flow field of this static micro-mixer, and gives the mixing principles of this micro-mixer. Rhodamine dye mixing experiments, as a flow…
罗丹明染料的混合试验可以直观地检测微型混合器的混合效果，同时采用计算图像灰度值标准差的方法定量分析了微型混合器的性能与结构参数、流量的关系。
With the commercial computational fluid dynamics code CFX, the effect of unheated region of narrow side on flow field and temperature field of a narrow channel is simulated in this paper.
本文运用商用流体动力学软件CF X数值模拟了非加热区对窄缝流道内流场和温场的影响。
The computational fluid dynamics (CFD) analysis of air-flow generating duct were utilized for sampling scheme given by uniform design to collect the train dataset.
利用均匀设计安排试验方案，并通过流体动力学仿真完成训练样本采集。选定相关向量机作为优化设计的评估函数。
The computational fluid dynamics (CFD) analysis of air-flow generating duct were utilized for sampling scheme given by uniform design to collect the train dataset.
利用均匀设计安排试验方案，并通过流体动力学仿真完成训练样本采集。选定相关向量机作为优化设计的评估函数。
应用推荐