Through the computation and analysis, some useful conclusions have been ar-rived.
通过理论分析与实际试算得出了一些有益的结论。
Finally, the method is substantiated valid through example computation and analysis.
最后，通过实例计算和分析证实了本文方法的有效性。
By computation and analysis the conditions to obtain the ideal operating characteristics are clarified.
通过计算和分析，还阐明了获得理想工作特性的条件。
The computation and analysis associating with structural theory are proceeded with a satisfying result.
运用结构理论对复杂能量系统进行了计算与分析，获得了满意的效果。
And it might be spreaded to the resistance computation and analysis of the ship-team of the other inland waterways.
证明本文成果可在明渠通航试验方案优化改善通航条件时参考应用，并可推广到其它内河船队的阻力估算和分析。
And the related computation and analysis are conducted based on test data of a specific tube-and-fin automotive radiator.
结合某管带式汽车散热器的试验数据进行了相关计算与分析。
Based on computation and analysis of seepage field, pore water pressure of inter-slice is defined in the effective stress method.
有效应力分析方法中依据渗流场的计算分析得到条间孔隙水压力。
By numerical computation and analysis the relationship among critical velocity and impact mass, hardening modulus, buckling time was given.
通过数值计算和分析，给出了临界速度与冲击质量、线性强化模量及临界时间间的关系。
Theoretical computation and analysis is carried out to find the relationship between the resistance and induction of the coil and its size.
对线圈的电阻、电感和线圈的尺寸等关系进行了理论计算与分析。
The hydraulic computation and analysis at the closure of the reservoir dike is important to the construction of the project in the Yangtze estuary.
水库围堤的龙口水力计算及水力条件分析是龙口施工设计研究的关键技术之一。
The results of computation and analysis show that the characteristics of geothermal distribution are closely related to those of topography, geological structure and strata.
计算及分析结果表明，地温场分布特征与地形地貌、构造及地质展布型态关系密切。
The APDL language was used to program the Preprocessor and Postprocessor of CAE optimal Design. The command batch files were built to implement automatic computation and analysis.
应用APDL参数化设计语言对CAE优化设计的前后置处理进行编程处理，生成分析命令批处理脚本文件，进而实现求解过程的自动化。
Through theory computation and analysis, the source of noise and transfer paths corresponding to every noise peak value are confirmed, the main aim to decreasing noise is pointed out.
通过理论计算和分析确定了噪声频谱图中各噪声峰值对应的噪声源及其传递路径，指明了压缩机降噪的主要目标。
The formulae of thickness in accuracy ware derived based on the principle of accuracy and then through the computation and analysis, the formulae might be proved and applied to practice.
根据准确度原理建立了厚度准确度公式，通过计算与分析，证明此公式可用于实际。
Through the computation and analysis of unsteady aerodynamic forces loading on the cascades and aerodynamic work, the probability of blade flutter is predicted through the energy method.
通过对叶片表面非定常气动力及其所做非定常气动功的计算分析，采用能量法对叶片颤振与否进行预估判断。
This paper presents computation and analysis of tangential mode of high frequency combustion instability in FY-20 liquid propellant rocket engine by means of the annular instability model.
本文用环形不稳定性计算模型计算、分析了FY -20液体火箭发动机的切向高频燃烧不稳定性。
Through numerical computation and analysis, and project practice, it indicated that this technology has good effect in anti-slide and guard against flushes, which is worth promoting its application.
通过数值计算分析，及具体工程的实践，表明该技术具有良好的抗滑和防冲效果，值得推广应用。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
The present we use finite element method software carries out the analog computation and analysis on montage roadbed settlement, the project design provides direction and the basis to roadbed montage.
现用有限元软件对拼接路基的沉降进行模拟计算与分析，为路基拼接工程的设计提供指导和依据。
Data analysis and computation are integrated with visualization to support computational steering and other complex interaction modes.
数据分析和计算与可视化集成在一起以支持计算指导和其它复杂的交互模式。
The influence of the material parameters on the void formation and growth is considered by numerical computation and the results are compared with those for static analysis.
通过数值计算，分析了材料参数和球体的半径比对孔穴生成和增长的影响，并与相应的静态结果进行了比较。
The dynamic fault simulating computation and characteristic analysis of transition process is performed under fault conditions, so the dynamic fault pattern base for whole power system is acquired.
对已发生过或可能出现的故障形式，进行了过渡过程动态故障模拟计算和特性分析，获得了动力系统全系统动态故障模式库。
Because the RGA computation is implemented based on the residue analysis, the proposed method can effectively reduce computational complexity and shorten signal selection process.
由于是在留数分析的基础上进行RGA计算，因此，这种调制信号选取方法可有效降低计算量和缩短选取进程。
The principle of variance analysis was introduced briefly. The block diagram and program of computation were given.
本文简要地介绍了方差分析的原理，给出了计算机程序框图和详细的程序。
The presented computation methods are also applicable to stability analysis of catch drain, impended wall, open caisson and other excavation works during construction.
所述计算原则和方法也适用于分析截水槽、倒挂井、沉井及其他土石开挖工程在施工期的稳定性。
This paper deals with this problem and carries on analysis and computation, combined with the application in a vehicle design.
该文拟在这方面进行探讨，并结合在机动车辆设计中的应用进行分析计算。
The results of the test prove that theoretical analysis and finite element computation are correct.
同时试验研究的结果证明了理论分析和有限元计算的正确性。
The formula can be used for meshing analysis and computation as coordinate system is chosen according to specific problem in meshing drive.
在啮合传动中，根据具体问题选取不同的坐标系，可应用同一计算公式进行啮合分析与计算。
The Curved Surface Mesh Generation is one of important premise for the FEM analysis and computation.
曲面网格自动生成是有限元分析和计算的一个重要前提。
With combination of bi-directional difference method and FEM, the computation and comparison analysis on cooling effect of flexible pipe and black pipe in TGP are carried out.
利用双向差分法和有限元法相结合，对三峡大坝采用软冷却水管和黑铁管的冷却效果进行了计算与对比分析。
应用推荐