A gyration piston and slide sheets engaged with the outer surface of the gyration are installed in each compression cylinder.
每个压缩缸内装有一回转活塞和与回转活塞外表面相啮合的滑片。
In a diesel engine, there is no spark plug. Instead, diesel fuel is injected into the cylinder, and the heat and pressure of the compression stroke cause the fuel to ignite.
柴油发动机内没有火花塞，取而代之的是将柴油喷入发动机气缸，然后压缩冲程在高温高压下引起燃料点火。
When you start a V-8 engine, you are only driving two cylinders (1 liter) through their compression strokes, but with one big cylinder you would have to compress 4 liters instead.
当你启动V - 8发动机时，只是通过压缩冲程驱动了两个气缸(1升)，但是如果是一个大气缸你必须要压缩4升。
Now both sides of the cylinder are used to compress gas, one side being in suction when the other is in compression.
气缸的两侧都用于压缩气体，一侧吸入气体时另一侧压缩气体。
The upper ring or rings are to prevent compression leakage; the lower ring or rings control the amount of oil being deposited on the cylinder wall.
上部的活塞环用来阻止压缩空气泄露；而下部的活塞环用来控制气缸壁上存留下来的机油数量。
In order to meet steady compression -resilience properties as cylinder gasket, the thickness tolerance of composite sheet and the density of flexible graphite plate should be control.
为了满足汽缸垫稳定的压缩、回弹性能要求，应注意复合板的厚度公差和柔性石墨面材最佳的密度范围的控制。
Based on the single axial compression of sintered iron cylinder specimens, the rationality and applicability of generalized yield criterion are validated for sintered powder metallurgy materials.
通过烧结铁圆柱试样单向压缩试验，验证了粉末冶金烧结材料广义塑性屈服条件的合理性和适用性。
The calculation result indicates that choose the appropriate compression ratio, the Angle of fuel injection can improve the cylinder burn and reduce the fuel exhaust.
计算结果表明，选择合适的压缩比、喷油提前角，可以改善缸内的燃烧过程，降低燃油消耗率。
Then in order to suppress smoke and save energy, adjustments of fuel flow, injectors, valve clearance and cylinder compression, etc, are performed.
从供油量、喷油器、气门间隙和气缸压力等方面进行调整，以达到消烟节能的目的。
Cylinder compression pressure is an important parameter for measuring the hermetical state of an engine.
发动机汽缸压缩压力是检测发动机机密封性的重要参数。
This paper discusses the optimization design of the two -stage cylinder composite compression coiled spring.
对圆柱组合压缩螺旋弹簧进行了优化设计。
Applying optimization design technology and the reliability theory a reliability-optimum design method of variable load cylinder helix compression spring is presented.
利用优化设计和可靠性设计方法，提出变载荷圆柱螺旋压缩弹簧的可靠性优化设计方法。
Quasi-static and dynamic compression experiments of carbon fiber reinforced epoxy resin matrix composite cylinder structures are implemented by NYL-200D testing machine and drop weight equipment.
利用NYL-200D型压力实验机和落锤装置对圆筒形碳纤维增强环氧树脂基复合材料结构进行了准静态和动态冲击压缩实验。
In addition, from a design perspective, this kind of compressor design for level 1 compression, pressure than too big, easy cause exhaust temperature is too high, cause cylinder coke, cause accidents.
另外，从设计角度看，这种压缩机设计为一级压缩，压比太大，易引起排气温度过高，造成气缸积炭，导致事故发生。
Displacement indicates engine size, and compression ratio compares the total cylinder volume to compression chamber volume.
位移表明发动机的大小，和压缩比比较气缸总容积压缩室容积。
The result shows that tangent turbulence intensity is nearly the same from the outer to the center of the cylinder in the compression stroke.
结果表明在压缩过程中，从缸心到缸壁，切向湍流强度值大体相同。
This paper presents an axial symmetric finite element analysis of rock cylinder under uniaxial compression and gives the new results which are more reasonable than early ones of other workers.
本文介绍单轴压缩圆柱状岩石试件内应力状态的一种轴对称有限元分析成果。
FOUR-CYLINDER COMPRESSOR, air cooled, single effect, four-stage compression.
风冷，单动作，四级压缩四缸压缩机主体。
The workpiece pressing using mobile rack cylinder direct drive to achieve the reliable compression.
工件压紧是用移动机架油缸直接驱动来实现的，压紧可靠。
The heat radiation in cylinder of a high speed light load compression ignition engine is measured using a heat radiation sensor.
在一台小型高速单缸压燃式发动机上，利用商用辐射传感器测量了缸内辐射传热量。
Based on the single axial compression of sintered iron cylinder specimens, the rationality and applicability of gene...
通过烧结铁圆柱试样单向压缩试验，验证了粉末冶金烧结材料广义塑性屈服条件的合理性和适用性。
Straight line motor twin-tub compression pump of the present invention is compression pump with novel double-stator straight line motor and twin cylinder structure.
本发明所述的直线电机双缸压缩泵，是在压缩泵内设置了新型的双定子直线电机和与之相配的双汽缸结构。
Due to the pressure of the door and window equipment to ensure adequate supply of gas, so it can be a very good use, which is the foundation to achieve the cylinder compression.
由于门窗设备的压料要确保足够的供气量，这么就能非常好的使用了，这是根底，来实现气缸压紧。
This paper makes simple force and its deformation analyses for the thin walled cylinder under axial compression at first.
本文首先对轴压薄壁圆筒作出简单的力及其变形分析。
Cylinder Compression Pressure Test.
汽缸压缩压力测试。
Always apply cylinder pressure slowly. The gas may heat up due to compression and ignite. This is called adiabatic compression.
由于经常受到缓慢的柱面压力，气体将有可能因压缩或者有火源靠近而被加热。
This paper makes the optimum autofrettage analysis of thick-walled cylinder of the material with different yield strength in tension and compression base on the Mohr's yield criterion.
本文运用莫尔屈服准则对承受内压的拉压屈服强度不同材料的厚壁圆筒进行了自增强分析，得到了依赖于材料拉压比的厚壁圆筒的最佳弹塑性界面半径、最佳自增强内压。
The experimental results show that the cracking pressure for hollow cylinder is not influenced by the axial load when it is lower than 80% of the uniaxial compression strength.
试验结果表明：轴向应力低于单轴压缩强度80%时孔道试样在内压下拉伸破裂，压力与轴向应力没有明显关系；
Most snare drums are constructed in plies that are heat - and compression-moulded into a cylinder.
小鼓大多是建于铺层是热和压缩成圆筒成型。
Most snare drums are constructed in plies that are heat - and compression-moulded into a cylinder.
小鼓大多是建于铺层是热和压缩成圆筒成型。
应用推荐