So in compressed air into any equipment must be ruled out before liquid water.
因此在压缩空气进入任何设备之前必须排除液体水。
During the cold seasons, outdoor compressed air of liquid water will freeze pipeline, cause blockage or burst pipe.
在寒冷的季节中，室外压缩空气管线中的液体水会冻结，引起管道堵塞或爆裂。
Liquid oil or oil aerosol after compressor was inject compressed air, or oil steam after cleansing and cumulative increase.
液体油或油的气溶胶在经过压缩机时被注入压缩空气中，或油蒸气经过凝露而累积增多。
Need to deal with large amount of liquid separator filters and all adopts automatic emissions way, if the level of compressed air filter device, condensation content filters and separator.
需要处理的液体量较大的过滤器和分离器都采用自动排放方式，如压缩空气的一级过滤装置、凝结物过滤器和分离器。
With compressed air temperature drop, the excess oil vapour condenses into liquid oil, to make the powder coating system problems.
随着压缩空气温度降低，多余的油蒸气将凝结成液体油，从而使粉末涂装系统出现问题。
Frozen type air dryer by lowering the temperature of compressed air to close to the freezing point of water, that extra water vapor condense into liquid water, thus and flow separation.
冷冻式空气干燥器通过降低压缩空气的温度至接近水的凝固点，使多余的水蒸气凝结成液体水，从而与气流分离。
Due to compression process influence the air dew point of compressed air in the pipeline, run it will gradually decrease temperature, so the compressed air system always have liquid water.
由于压缩过程影响空气的露点，压缩空气在管线中运行时温度会逐渐降低，所以压缩空气系统中总是有液体水存在。
The compressed air pollutants including steam, liquid or solid.
压缩空气中的污染物包括蒸气、液体或固体。
The flocculation filter and is easy to be automatic emissions from compressed air system to remove liquid oil.
采用絮凝过滤器和自动排放器很容易从压缩空气系统中除去液态油。
Discharge valve can be will collect the liquid and solid particle emissions, prevent the liquid flow off the downstream, the pollution downstream compressed air system.
排放阀可以将收集的液体和固体微粒排放掉，防止液体流向下游端，污染下游端的压缩空气系统。
The above two kinds of devices can be in a dryer the flow of compressed air cooling to constant temperature and avoid a cold and led to excessive condensing liquid produce.
上述两种装置都可以将干燥器中一定流量的压缩空气冷却至恒定的温度，避免过冷而导致过多的冷凝液体产生。
In order to remove the compressed air particles, liquid or water, oil, and sol, etc, to filtering compressed air handling is very necessary.
为了去除压缩空气中的微粒、液体或水、油溶胶等，对压缩空气进行过滤处理是非常必要的。
Liquid water is compressed air in powder coating system to produce a major problem, is the best way of setting out before in liquid water in the compressed air of the excess moisture to rule out.
液态水是压缩空气在粉末涂装系统产生的主要问题，最好的办法是在液态水凝结出来之前将压缩空气中过剩的水气排除掉。
Excess water vapor condenses into liquid water, and with the flow of compressed air into the water-air separator or condensation filter, will that liquid water from in the compressed air is isolated.
多余的水蒸气凝结成液态水，并随压缩空气流进入水-空气分离器或冷凝过滤器，将液态水从压缩空气中分离出来。
If into the dryer compressed air flow and pressure beyond design range, separation effect will decline, liquid water would be through the separator make dryer out of compressed air pressure rise.
倘若进入干燥器的压缩空气流量和压力超出设计范围，分离效果将下降，液态水就会通过分离器使干燥器出来的压缩空气压力凝露点升高。
If the compressed air system problems, need liquid water by condensation water filter or the drainage device to emerge.
如果压缩空气系统中液态水问题突出，则需要采用凝结水过滤器或排水装置加以脱出。
Is not water-air separator or condensation of liquid water separation filter with compressed air dryer in leave before is heated to evaporation become gas.
未被水-空气分离器或冷凝过滤器分离的液态水随着压缩空气在离开干燥器之前被加热而重新蒸发成为气体。
Buffer extended the compressed air cooling and steam condensation of time, buffer automatic drainage function to avoid the liquid water in the bottom of the container sedimentary likely.
缓冲器延长了压缩空气冷却以及蒸气冷凝的时间，缓冲器的自动排水功能避免了液态水沉积在容器底部的可能。
The purpose of compressed air dryer is to lower water vapor in the compressed air, in order to avoid the compressed air in the pipeline happened liquid water condensation.
压缩空气干燥器的目的在于降低压缩空气中水蒸气含量，以避免压缩空气管线中发生液态水冷凝。
Changes in hydrogen content in liquid aluminum were measured under different relative humidity of compressed air in low pressure die casting.
在不同的压缩空气相对湿度下，试验测定了低压铸造过程中液态铝合金氢含量的变化。
I will be trapped in an empty yard time, pray for it with a vacuum compressed into the flow of liquid.
我将时间困在一个空瓶子里，祈求用真空将它压缩成流动的液体。
Aluminium plastic compound pipe may be used for transportation of cold and hot water, liquid acid, alkali and salt, and various gases as fuel gas, oxygen, compressed air, etc.
铝塑复合管可用于冷热水，酸碱盐各种液体，燃气、氧气、压缩空气等各种气体的输送。
Liquid-vapor separator: it is installed on the exhaust pipe line to separate the compressed gas from treatment fluid, the separator is a pressure vessel.
气液分离器：安装在排气管路上用以实现压缩气体与工作液的分离，分离器属压力容器。
There are two different methods of product withdrawal from a liquefied compressed gas container: as a vapor (gas) or as a liquid (liquefied gas).
从液化压缩气体容器内提取产品有两种不同的方法：作为蒸气（气体）或作为液体（液化气体）。
Fluctuation in hydrogen content results from wet air. The dry compressed air is helpful to highly qualified liquid al.
潮湿的空气会造成含氢量的波动，干燥的压缩空气更有助于获得高质量的铝合金液。
The team compressed the gas into its liquid form and pumped it into a layer of sandstone 24 metres thick, lying 1. 5km ( about a mile ) under the surface.
该研究小组先把二氧化碳压缩成液体，然后把它泵入到一层距离地面1 。5公里（约1海里） 、厚度为24米的沙岩中。
The gas passing through the gas turbine is cooled and compressed into liquid refrigerant to realize the circulatory utilization of the refrigerant.
并将通过气轮机后的气 体进行冷却压缩为液体制冷剂以实现制冷剂的循环利用。
In the course of operation, pus liquid, clot as well as necrosis tissues were cleared and visceral fiberboard on the lung surface was stripped to make the compressed lung fully expanded.
术中清除脓液，脓块及坏死组织，剥除肺表面的脏层纤维板，使被压缩的肺组织充分膨胀。
The wooden piece (1) is sandwiched and compressed by the pair of metal molds (51, 61) including the metal mold (61) to which the property granting liquid (101) is applied.
通过包括施加有性质赋予液体(101)的金属模(61)在内的所述一对金属模(51,61)夹持和压缩所述木质件(1)。
The wooden piece (1) is sandwiched and compressed by the pair of metal molds (51, 61) including the metal mold (61) to which the property granting liquid (101) is applied.
通过包括施加有性质赋予液体(101)的金属模(61)在内的所述一对金属模(51,61)夹持和压缩所述木质件(1)。
应用推荐