The nitrided layer of pure iron consists of compound layer and diffusion layer.
纯铁渗氮层则由化合物层和扩散层组成。
Conclusion The compound layer radiation human amnion could be a good biological dress for burn surface.
结论复层辐射人羊膜覆盖烧伤创面是一种理想的生物敷料。
Methods The compound layer radiation of human amnion had been studied since 1994 in experiments and clinic.
方法1994年以来，我们对复层辐射人羊膜进行了实验及临床研究。
The results show that the compound layer is composed of titanium sulfide, titanium nitride, interlayer and substrate.
结果表明：复合渗层由钛的硫化物、钛的氮化物、过渡层及基体组成。
The energy barrier formed between the organic compound layer (1) (102) and the organic compound layer (2) (103) thus can be lowered.
于是就能够降低形成在有机化合物层(1)(102)与有机化合物层(2)(103)之间的能量势垒。
Properties of nitrided parts have close relation to phase composition of their compound layer and microstructure of their diffusion layer.
渗氮件的性能与渗氮层的化合物相组成和扩散层的微观结构密切相关。
The results showed that the hot-dip aluminizing coatings on both the J55 and N80 steels were composed of aluminum layer and Fe-Al intermetallic compound layer.
结果表明：J55和N80钢热浸镀铝后的镀层组织均可分为纯铝层和铁铝金属间化合物层两层；
This paper deals with the influences of pulsed magnetic field on the depth, microstructure and hardness of the nitrided layer and the thickness of the compound layer.
本文研究了脉冲磁场对气体氮化的氮化层深度、化合物层厚度、氮化层组织及其硬度的影响。
The results show that a compound layer with good wear-resistance and corrosion resistance can be gained in 304 austenitic steel by chromizing sbusequent solid soluti…
结果表明，304奥氏体不锈钢经渗铬固溶渗氮复合处理后可获得性能优良的复合渗层，且耐磨、耐腐蚀。
The experiment shows that the compound layer with nitride and oxide is obtained in surface of 45 steel by the combined treat of ion nitrocarburizing and oxidizing. The compou…
结果表明，45钢经离子氮碳氧复合渗处理后，表层可获得化合物和氧化物的复合渗层，明显提高45钢的耐磨性能。
At the same time, double compound layer which was composed of metal transition layer with high hardness and ceramic layer improved the service life and safe stability of the composite pipes greatly.
同时，高硬度的金属过渡层与陶瓷层组成的双层复合结构使复合管的使用寿命和安全稳定性显著提高。
Features: high temperature extrusion compound, paste directly off layer stout.
特点：直接高温挤压复合，黏贴结实不脱层。
This paper reviews two dimensional electron gas formed on the liquid helium surface, the semiconductor surface space charge layer and the compound semiconductor heterojunction interface.
本文简要介绍了液氦表面、半导体表面空间电荷层和化合物半导体异质结界面的二维电子气。
In fact, the thickness of the intermetallic layer is determined by a combined process including simultaneous dissolution and growth of the intermetallic compound.
实际上，在化合物层的生长过程中同时也伴随着溶解过程，由于其生长速度大于溶解速度，化合物层厚度随钎焊时间的增加而增加。
The packing bag suits in extensive range, suit for multi-layer compound. Monolayer PE, PP and so on preformed bag made by film and paper.
该包装袋西装范围广泛，适合于多层复合。单层pe,PP等由薄膜和纸张制成的预制袋。
Method for decomposition and removal of organic compound in air using platinum as main catalysis, method for formation of photocatalytic article and photocatalytic layer, and photocatalyst.
铂金作为分解消除空气中的有机化合物的主要触媒的技术方案，及于其相关的光触媒产品，光触媒层形成方法和光触媒体。
The compound fire-resistant glass is the special glass that is compounded by two or several layer glasses, or single panel and organic materials, which satisfies with the fire-resistant rate.
复合防火玻璃是由两层或两层以上玻璃复合而成或由一层玻璃和有机材料复合而成，并满足相应耐火等级要求的特种玻璃。
The effects of heat treatment technology on the properties of working layer material of hot continuous steel pipe rolling mill wear resistant compound liner are researched.
研究了热处理工艺对钢管连轧机架耐磨复合衬板工作层材料力学性能的影响。
The effects of heat treatment on the properties of working layer material of wear resistant compound liner in hot continuous steel pipe rolling mill are researched.
研究了热处理工艺对钢管连轧机架耐磨复合衬板工作层材料力学性能的影响。
The common methods include geologic outcrop, VSP well logging, regionally obvious geologic layer and artificial compound data, etc.
常规的层位标定方法有地质露头、VSP测井、区域明显地质层、人工合成记录等。
Extrusion die design for compound triple-layer plastic pipe by two extruding machines is introduced.
介绍用两台挤出机共挤复合三层塑料管材机头的模具设计。
The effect of the compound figuration is then evaluated by measuring the shell stress, the layer gap and the lining circumferential strain during the hydraulic bulge.
通过试验测量其壳体应力、层间间隙、衬里环向应变来评价复合效果。
The surface layer consists of oxide, sulphide and N, C compound.
表层由氧化物、硫化物和氮（碳）化合物组成；
The mechanism of the compound effects of ultrasonic-electrodeposition was discussed, and several factors that have effected on the formation of the composite layer were concluded.
探讨了超声—电沉积复合作用的机理，总结出影响复合镀层生成的几个因素。
The solid-solid phase transitions in the perovskite-type layer title compound have been studied by infrared spectroscopy and DSC method.
用红外光谱和差示扫描量热法（DSC）研究了具有钙钛矿型层结构标题配合物的固-固相变。
In the deposition step, the glass fine particle layer is formed while feeding an organobismuth compound into the glass pipe.
在所述沉积步骤中，在将有机铋化合物供应至所述玻璃管内的同时形成玻璃微粒层。
The unsuitable carbonitriding process, internal oxidation, over deep depth of carbonitrided layer and crust like C N compound on the surface are the main reasons to cause fracture.
碳氮共渗工艺选择不当，共渗层过深，表面出现壳状碳氮化合物、内氧化等缺陷组织是造成其断裂的主要原因。
Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.
通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。
With a spatula apply a layer of bonding compound BONDING AND ADHESIVE COMPOUNDS (Material No. 08-004) to the contact faces of the heat exchanger and the ducts.
在热交换器和管子的接触面上用一抹刀涂上一层复合胶粘剂（材料号08-004）。
With a spatula apply a layer of bonding compound BONDING AND ADHESIVE COMPOUNDS (Material No. 08-004) to the contact faces of the heat exchanger and the ducts.
在热交换器和管子的接触面上用一抹刀涂上一层复合胶粘剂（材料号08-004）。
应用推荐