This thesis mainly studies test cases generation for Object-Oriented programs based on composite testing strategy.
本文研究基于混合测试策略的面向对象程序测试用例生成。
A number of senior engineer company name, strong production ability and improve the processing of sealing materials and composite testing, test equipment.
公司聘有高级工程师数名，具有强大的加工生产能力和完善的密封材料和组合件检测、实验设备。
In particular, the practices of build automation (including compilation and testing), pre-built binary staging, and composite releasing could be adopted by any project.
特别是，构建自动化(包括编译和测试)、预构建好的二进制码的执行，和复合发布的实践可被所有项目采用。
Validating SOAs means testing components at the service level as well as at the level of composite applications.
验证soa的意思是在服务层和复合应用程序层对组件进行测试。
Testing of composite applications, including the challenges of testing across business boundaries.
组合应用的测试，包括跨企业边界的测试挑战。
Repair technology, property testing techniques at high and low temperature, characterization and quality control as well as ap-plied basic research of composite materials are also briefly introduced.
对复合材料的修补技术、高低温性能测试技术、性能表征与质量控制以及应用基础研究也作了简要介绍。
By use of dynamic strain testing, the ultrasonic wave, bedded composite rock damage and fracture mechanisms and the fragmentation process during blasting have been experimentally studied.
运用超动态应变测试技术、超声波检测仪对层状复合岩体的爆破损伤破坏机理和破坏过程进行了实验研究。
The characteristics of microwave nondestructive testing for composite materials and nonmetallic materials are introduced.
介绍了微波用于复合材料和其它非金属材料检测的特点。
Through the active control testing on composite material cantilever beam, the process of vibration absorbed is carried out.
通过对悬臂的复合材料梁实施主动控制试验，实现了减振控制过程。
The related theory and application of bearing - load composite joints are briefly reviewed, including design basis. structure. strength analysis. related testing and so on.
介绍复合材料承力接头设计的相关理论及应用状况，包括设计基础、结构形式、强度分析、相关试验等。
The calculation methods of bearing capacity and settlement and testing methods of CFG and lime piles composite foundation are put forward.
同时介绍了cfg桩和石灰桩形成的多元复合地基的承载力和沉降的计算方法及检测方法。
The method of testing the non combustibility of the composite material by using calorimeter is scientific and its determination conditions are rather safe and practical.
文章讨论了采用锥型量热计对复合材料的不燃性进行检验，方法科学，判定条件偏于安全，可操作性强。
The dynamic wavelet neural network method is applied to predict the fatigue residual life of the composite material. The predicting result is very close to the testing result.
本文采用动态小波神经网络方法，对复合材料疲劳剩余寿命进行了预测，结果与试验结果很接近。
In this paper, the formation, properties and the application of composite interferograms in the testing of optical materials and optical elements are reported.
本文报导了组合干涉图的产生、特性及在光学材料和光学元件检验中的应用。
Infrared thermographic non destructive testing (it NDT) was increasingly used in the inspection of composite materials due to large surface, rapid and noncontact testing capabilities.
红外热成像无损检测由于检测面积大、速度快和非接触从而在复合材料缺陷检测中的应用越来越广泛。
As defects on composite material structure and composite material reinforced structure are inside, traditional testing method is hardly possible.
复合材料结构和复合材料加固结构的缺陷一般都是内部缺陷，传统的人工目测法很难检测。
A composite class testing model can provides data flow analyzing in state-based testing.
提出了一种混合类测试模型，能在基于状态的测试中提供有效数据流分析。
Several advanced testing methods were introduced, with two typical cases of holography testing used in the analysis of fibre-enhanced composite materials.
并给出了应用全息摄影法检测纤维增强复合材料层板的两个实例。
Four kinds of biological protective composite materials were prepared, and the best composite material was chose via basic property testing.
通过四种不同的方法制备了生物防护复合面料，通过基本性能测试选取了最优方案。
This paper described work principle and structure design of side cut punch composite mold and assembly testing requirements using the crank press machine.
介绍了在曲柄压力机上切边冲孔的复合模结构设计、工作原理及装配和调试要求等。
Quasi-static and dynamic compression experiments of carbon fiber reinforced epoxy resin matrix composite cylinder structures are implemented by NYL-200D testing machine and drop weight equipment.
利用NYL-200D型压力实验机和落锤装置对圆筒形碳纤维增强环氧树脂基复合材料结构进行了准静态和动态冲击压缩实验。
Using the testing method of PL spectra, XRD, TEM and SEM, the properties of composite phosphor were identified, including spectrum, structure, granularity and appearance.
利用PL光谱、XRD、TEM、SEM分析手段，对纳米复合荧光粉的光谱、结构、粒度、形貌进行了表征。
Experiment proved that the system was successful for the nondestructive testing of composite and honeycomb interlayer structures.
试验证明，该系统可成功用于复合材料结构和蜂窝夹层结构的无损检测。
Completed the electrical characteristics test of the composite permanent magnet motor by applying "composite permanent magnet motor Testing System".
测试系统通过权威机构检测，实际应用于复合式永磁电机的性能测试工作。
Corrosion resistance and wear resistance of the liquid microcapsule composite copper coating was evaluated by 25% ammonia, 10% HNO_3 corrosion testing, and wear testing.
通过进行25%氨水溶液腐蚀试验、10%硝酸溶液腐蚀试验和耐磨试验，测定了这种复合镀层的耐蚀性和耐磨性。
The composite model is used for the two unstable well testing interpretation models of this well.
该井两次不稳定试井解释模型都选用复合模型，并通过评价说明该井有很好的前景。
Testing results showed that the self-designed tensile testing jigs suited for measurement of tensile properties of composite materials at low temperature; the jigs have little effect on the results.
试验结果表明：新设计的拉伸夹具能够在低温环境下很好地测定复合材料力学性能，夹具本身对测量结果无影响。
Being related to the first assembled monolithic precast concrete testing-building in our country, the loading experimental study is introduced on assembled monolithic composite continuous slab.
结合国内首栋预制装配整体式混凝土结构试验楼工程，对装配整体式叠合连续楼板进行现场加载试验研究。
Being related to the first assembled monolithic precast concrete testing-building in our country, the loading experimental study is introduced on assembled monolithic composite continuous slab.
结合国内首栋预制装配整体式混凝土结构试验楼工程，对装配整体式叠合连续楼板进行现场加载试验研究。
应用推荐