The governing ordinary differential equations of composite stress are given by using shear-lag theory.
通过剪切滞后模型建立了复合材料应力场的控制微分方程。
The influence of temperature to the composite stress is very complex, it relates to initial temperature, temperature range and the way to give loads.
温度变化对复合材料板应力场的影响与温度变化幅值、加载方式和初始温度的大小有很大的关系。
The composite stress factor and pre-tensile force loss of the two diameter high strength bolts of M27 and M24 are experimentally determined in the paper.
本文对M27和M24两种直径高强度螺栓进行了复合应力系数测定和预拉力损失试验。
Detailed study was done in the determination of base bearing capacity, raft stake composite stress analysis, auger ground, bearing stratum stress stretching and pile foundation construction.
对设计中的基础承载力的确定、筏桩复合受力分析、下卧软土、持力层应力扩展、桩基施工等方面进行了较为详细的研讨。
The teams recommended a variety of improvements in lightweight composite structures, heat- and stress-tolerant engine materials, and aerodynamic modeling that can help bring their ideas to reality.
这些团队为轻比重的合成材料结构、耐热和耐应力的发动机材料、有助于实现其设想的空气动力学模型提出了不同的改进建议。
It can be seen from the results that the properties of stress dispersion of composite ground are affected by many factors, such as geometrical properties of reinforced layer and load.
计算结果表明，复合地基是否具有应力扩散的效应受很多因素影响，如加固层的几何性质、荷载分布的几何性质等。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
The thermal stress distribution of the stainless steel lined composite steel pipe prepared by centrifugal-SHS process was calculated by the finite element method under thermoelastic assumption.
用有限元方法计算了铝热离心法制备不锈钢内衬复合钢管过程中的残余热应力分布。
Stress of composite material plate with circular hole was analyzed by the model above.
按照所建立的计算模型对含有圆形孔的复合材料板进行应力分析。
The more attention was paid for the effects of matrix, interface and fiber orientation on stress transfer and stress distribution in composite.
研究中主要讨论了基体、纤维和界面的力学性能以及纤维位向的变化对应力传递和应力分布的影响。
The dissertation applied the Shear Lag theories in Fiber Reinforced Composite material mechanics to the analysis of stress distribution of the anchored rock mass.
本文将纤维增强复合材料剪切滞理论运用于锚杆加固岩体应力分布规律的研究。
The deformation and stress condition of the micro-composite are studied according to the shear-lag theory and strain-hardening law.
按照剪切滞后理论和应变硬化规律，研究微复合材料的变形和应力状态。
The origin of burnout in PE class include mainly: affect of used education idea, increasing stress of employment, poor composite factors of PE and lower self efficiency.
体育课倦怠成因主要有：陈旧教育观念的影响、就业压力增大、体育教学的综合因素欠佳和较低的自我效能感。
Stress distributions in particle filled composite are studied by finite element method.
本文采用有限元分析方法，对颗粒填充复合材料进行了受力分析。
The accuracy of settlement calculation of composite foundation with mixing piles depends on the additional stress distribution in the foundation, especially in the subjacent bed.
搅拌桩地基沉降计算的准确性取决于搅拌桩复合地基中附加应力的分布，特别是下卧层应力的分布。
Through this test, we can further understand the destroyed mechanism and the lateral capacity of the high-rise composite masonry wall under the action of both stress and lateral distributing load.
通过试验更加深入地了解高层组合墙片在竖向压力和侧向分布荷载共同作用下的破坏机理及抗侧承载力。
The damage for the interface of composite can be induced by the vibratory treatment when the maximum cycling stress exceeds certain extent.
当循环上限应力超过一定程度后，振动处理会对复合材料界面造成一定损伤。
Therefore, to develop the composite with high permittivity, which can control electrical stress, has become an important subject in the field of engineering dielectric physics.
因此，研究与寻找具备高介电常数的电应力控制新型聚合物基复合材料就成为工程电介质物理领域研究的重要课题。
Based on the theory of elastic dynamics, the scattering of elastic waves and the dynamic stress concentration in a fiber-reinforced composite are studied.
基于弹性动力学理论，对纤维增强复合材料结构中弹性波散射及动应力集中问题进行了分析研究。
The elastic-plastic stress and displacement fields of cylindrically orthotropic composite thick-walled tube under uniform radial pressure are studied.
研究了在均匀径向压力作用下圆柱正交异性复合厚壁圆筒的弹-塑性应力场和位移场。
Meanwhile, the distributions of additional stress of the composite pile foundation with equal pile length and the composite pile foundation with the adjusted soil rigidity.
对地基土刚度调整后的中心布桩复合桩基土中附加应力的分布进行了有限元模拟。
The stress field in the composite fabric which made by needle punching during tensile test, and the difficulty of calculating the stress - strain property are analyzed from the fabric structure.
根据针刺复合织物结构，分析其在拉伸过程中的内部应力场，说明拉伸应力应变预测计算的困难。
Considering the distribution of thermal stress in composite, the biggest stress exits at the sharp Angle of particle.
在复合材料中存在的热应力分布中，颗粒尖角处的应力最大。
Therefore, the residual stress in the CFL/EP composite can be studied on the basis of the above results.
计算结果和试验结果吻合得较好，为后续的CFL/EP复合材料湿热残余应力的分析打下了初步基础。
Mathematical model of multi-layer composite artillery barrel with ceramic liner was built by using axisymmetric elastic theory, and stress computer program of the composite barrel was developed.
应用轴对称弹性理论建立了陶瓷内衬多层复合身管的数学模型，编写了其应力计算程序。
The different styles and composite of birefringence are caused by growth stress and post growth stress .
金刚石异常双折射的不同形式和组合是生长应力和生长期后应力作用的结果。
In this paper, the theoretical calculation and experimental research have been carried out about the hole edge stress for composite materials.
本文对复合材料的孔边应力进行了理论计算与测试研究。
Designed model established by ANSYS program is used to analyze the loading behavior of the CFG pile composite foundation such as vertical displacement, stress and character of destructive capability.
利用ANSYS有限元程序建立模型，对CFG桩复合地基承载性状(竖向位移、应力分布、破坏特点等)进行了分析。
Designed model established by ANSYS program is used to analyze the loading behavior of the CFG pile composite foundation such as vertical displacement, stress and character of destructive capability.
利用ANSYS有限元程序建立模型，对CFG桩复合地基承载性状(竖向位移、应力分布、破坏特点等)进行了分析。
应用推荐