The composite layer is adapt to status of impact wear with low energy.
复合铸渗层适合于小能量冲击磨损的工况条件。
The solidification process of the surface composite layer was also analysed in this paper.
本文分析了表面复合材料层的凝固过程。
Composite layer board model is adopted to analyse functionally gradient materials cantilever board.
采用复合材料层合板模型，对梯度功能材料悬臂板进行了分析。
The result showed that there was obvious gradient in the distribution of the hardness and microstructure of the composite layer.
研究结果表明，复合材料层的硬度及显微组织分布均存在明显的梯度。
Metal matrix composite layer reinforced in situ ZrC particles was formed by laser cladding overlapping on the medium carbon steel.
采用激光熔覆搭接技术，在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
The form of composite layer depends on capillary among the infiltrate grain and pervasion between liquid metal and infiltrate element.
渗层的形成主要是依靠渗剂颗粒之间毛细管的毛细吸附作用，加上基体金属液和渗剂元素之间的互扩散作用。
Using a prefabricated porous ferroboron lump, a surface composite layer was made on gray cast iron matrix, with a common casting method.
通过预先制备带有孔隙的硼铁合金预制块，用普通浇注的方法，获得以灰铸铁为基的铸造表面复合材料。
Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.
通过低压铸造后固溶处理的方法，获得了网状金属间化合物增强铝合金表面复合层。
The present invention discloses a manufacture method for a composite layer of a complex alloy steel pipe, a fastening element, and a protective grating.
本发明公开了一种多元合金钢管、紧固件、防护栏复合层的制作方法。
By varying cast-penetration technics, the influence of thickness and quality in composite layer with si by casting on the surface of cast steel were studied.
研究了不同铸渗工艺对铸钢件表面铸渗硅复合层厚度和质量的影响。
Said electron type organic composite layer comprises the polymeric material and multi electron type conducting particles dispersed in the polymeric material.
所述电子型有机复合物层包括聚合物材料及均匀分散在聚合物材料中的多个电子型导电颗粒。
Based on the action of ultrasonic-electrodepositing, the technique of preparating nanocermet(Ni-SiC) composite layer on the surface of metal substrates was studied.
基于超声电沉积复合作用，研究在金属表面获得纳米金属陶瓷复合镀层的基本工艺。
The influence of WC content, coating treatment on quality and wear-resistance property of composite layer was studied by using metallographic studying and wear examination.
通过金相观察、磨损实验研究了WC 颗粒含量及WC包覆改性处理对渗层质量和渗层耐磨性的影响。
The mechanism of the compound effects of ultrasonic-electrodeposition was discussed, and several factors that have effected on the formation of the composite layer were concluded.
探讨了超声—电沉积复合作用的机理，总结出影响复合镀层生成的几个因素。
The worn layer of Al-Si alloy where only wear debris are going to delaminate is composed of composite layer, deformed layer and undeformed parent material from the surface to the inside.
即将发生粒子剥落的铝硅合金磨损表面区域，由表及里为复合层、变形层相未变形母体材料。
In addition, the surface morphology of active composite layer and the interface modification between active layer and electrodes could also influence the power conversion efficiency of the solar cell.
通过对器件活性层和电极界面进行修饰和采用不同溶剂、不同给受体掺杂比例、不同活性层厚度成膜等方法对器件进行优化并研究其与器件性能之间的关系；
Components are then combined or integrated into composite applications to provide services in the third layer.
然后，将组件结合或集成到复合应用程序中来提供第三层的服务。
Keep the atomic service layer and composite service layers separate.
保持原子服务层与合成服务层的分离。
Since composite applications may have different views of the data, there needs to be a way of providing data variability at the database schema layer.
由于组合应用程序可能具有不同的数据视图，因此需要能够在数据库模式层提供数据可变性。
There are two ways to build a composite POJO at your service layer.
有两种方式在服务层构建组合POJO。
In the service choreography layer, composite services are defined by means of a choreography language, such as BPEL (Business Process Execution language).
在服务编排层，组合服务是通过编排语言(例如业务流程执行语言(Business Process ExecutionLanguage,BPEL))定义的。
BPEL is a layer on top of WSDL; it specifies the behavior for the composite Web services participating in a process flow.
bpel层在WSDL之上，它指定参与流程流的复合web服务的行为。
At the application layer within the Infiniflow Service Fabric architecture, scale out behaviour of a composite System is a function of.
在Infiniflow服务结构(ServiceFabric)架构的应用层，一个组合系统的向外伸缩行为是以下功能。
The metal-plastic composite nut, according to Claim 1, is characterized in that the injection molding of metal insert and complete plastic layer.
根据权利要求1所述的金属塑料复合螺帽，其特征在于所述金属嵌件与塑料层整体注塑成型。
Stacking way for chevron and sloping layer combination of continuous composite material piling and taking way is expected to take for full face.
堆料方式为人字形和倾斜层组合的连续复合形堆料，取料方式为全端面取料。
It can be seen from the results that the properties of stress dispersion of composite ground are affected by many factors, such as geometrical properties of reinforced layer and load.
计算结果表明，复合地基是否具有应力扩散的效应受很多因素影响，如加固层的几何性质、荷载分布的几何性质等。
The structure is made of concrete and steel, while the outside layer is clad with composite wood panels that offer guaranteed durability.
该结构是由混凝土和钢材制成，外层用复合木板包覆，保证其耐久性。
From inner to outside, the composite pipe consisted of alumina ceramic layer, metal transition layer, white cast layer, carbon atom diffusion layer and nodular cast iron layer.
复合管从里到外由氧化铝陶瓷层、金属过渡层、白口铸铁层、碳原子扩散层、球墨铸铁层组成。
From inner to outside, the composite pipe consisted of alumina ceramic layer, metal transition layer, white cast layer, carbon atom diffusion layer and nodular cast iron layer.
复合管从里到外由氧化铝陶瓷层、金属过渡层、白口铸铁层、碳原子扩散层、球墨铸铁层组成。
应用推荐