Handling the root component is the only tricky part of the adhesive between the designer host, the design-time environment, and the user interface.
处理根组件是设计器宿主、设计时环境和用户界面之间的粘合剂的唯一需要技巧的部分。
Knowledge about adhesive component in telecom industry will be prior.
有电信行业黏胶类产品知识及经验者优先。
The studies on the distributing rule of component and molecular weight had great significance on comprehending the adhesive properties of asphalt deeply.
沥青组分分布及分子量分布规律的研究，对于深入了解沥青的粘附性能具有重要意义。
Still further, there are provided, comprising these compositions as an active component, a paint, ink, adhesive, sealant and primer.
此外，还提供含有这些组合物作为有效成分的涂料、墨、粘合剂、密封剂和底漆。
The one component solvent-free moisture curing polyurethane adhesive was researched.
研制了单组分无溶剂型湿固化聚氨酯胶粘剂。
The influence of inorganic filler, functional monomer, etching treatment of teeth surface, etc on the shearing strength of one-component visible-light curing orthodontic adhesive was studied.
研究无机填料、功能单体及牙齿表面酸蚀与否等因素对单组分可见光固化齿科正畸粘接剂剪切强度的影响。
Manufacture process and influence factors of one-component polyurethane adhesive for cork products were described in detail.
详细地阐述了软木制品用单组分聚氨酯胶黏剂的制备工艺和反应过程中的影响因素。
UV5222 is one component, epoxy based, cationic curable adhesive.
UV 5222是一种单组分，环氧基阳离子固化胶粘剂。
In an electronic component mounting structure, a first circuit board and a second circuit board are bonded with an electronic component mounting adhesive.
在电子部件安装结构中，第一电路板和第二电路板通过电子部件安装粘合剂来结合。
Two-component polyurethane adhesive for composite membrane was studied in terms of its composition, synthesis and process conditions.
本文确定了复合膜用双组份聚氨酯胶粘剂的组成成份，合成方法和工艺条件。
A novel two-component epoxy adhesive with high adhesive strength was developed to meet the bonding requirement of mounting plate of crane rail and steel beam in the workshop.
根据车间内钢梁上吊车轨道安装底板与钢梁粘接的具体要求，研制了一种中温固化双组分环氧胶粘剂。
The effect of 13X zeolite molecular sieves on cured property of two -component PU adhesive was studied.
研究了13X沸石分子筛对双组分聚氨酯胶粘剂固化性能的影响。
The adhesive (506) may melt under and to at least one edge of the component (501).
粘合剂(506)可以向下熔化到组件(501)的至少一个边缘。
UV 574 is one component, high viscosity adhesive.
UV 574是一种单组分，高粘度粘接剂。
A device (501) comprising a component (501) and an adhesive (506) attached to at least one exterior portion of the component.
一种设备(501)包括：组件(501)；和附贴到该组件的至少一个外部部分的粘合剂(506)。
Cholesterol was the main component of the adhesive material.
胆汁析出的黏附物质中胆固醇是主要成分之一。
When the component (501) is on a printed circuit (500) and passed through a reflow operation, the adhesive melts forming a physical bond between the component (501) and the printed circuit (500).
当组件(501)位于印刷电路(500)上并且经过回流操作时，粘合剂熔化而形成组件(501)与印刷电路(500)之间的物理接合。
The rims of the bottom plate are folded upwards, forming a ring-like area, whereupon the tubular supporting component is fixed by adhesive technology.
将底层板周边向上弯曲折边，将蜂窝型管状支撑件采用胶粘工艺固定在底层板的折边区域内。
The top end of the honeycomb tubular supporting component is fixed with the top plate by adhesive technology. The top plate does not make linear contact with the unfolded side, but leaves a gap.
在蜂窝型管状支撑件上方采用胶粘工艺固定顶层板，顶层板与底层板的弯曲折边不形成线性接触，形成缝隙。
The influences of the dosage of HEA (or HPA, GMA)and ratio of component A and B on the capability of two-component acrylate adhesive were studied.
研究了自交联丙烯酸酯的用量及A组分与B组分的配比对双组分丙烯酸酯胶粘剂性能的影响。
In simulation test, the C/C composite with artificial defects is bonded and remedied. The results show that the adhesive is very effective and satisfy index of real component.
对人工模拟缺陷的C/C复合材料试样做粘接修复实验，结果表明，采用该修复胶体系粘接修复，并进行适当的致密化处理，能起到较好的修复作用，可满足真实构件的指标要求。
Hot melt adhesive is a kind of non-solvent, 100% fixed component thermal plasticity material.
热溶胶是一种不含任何溶剂，为100%固定成份热可塑性物质。
TC906B is a kind of one-component dealcoholized silicone sealing adhesive especially for PV module, which has high strength, good adhesion to Aluminum, copper and stainless steel etc.
OPT906光伏组件专用密封胶为单组份脱醇型有机硅粘接密封胶，强度高，粘接性好，对铝、铜、不锈钢等多种金属有优秀的粘接性；
TC906B is a kind of one-component dealcoholized silicone sealing adhesive especially for PV module, which has high strength, good adhesion to Aluminum, copper and stainless steel etc.
OPT906光伏组件专用密封胶为单组份脱醇型有机硅粘接密封胶，强度高，粘接性好，对铝、铜、不锈钢等多种金属有优秀的粘接性；
应用推荐