Finally, a control and compensation software was developed and might be used to ELID grinding and MAF process for complex surface machining.
最后,开发出能同时适用于ELID磨削与MAF的复杂曲面光整加工控制与补偿软件。
It is very important to write the error compensation software in order to make the technology of error compensation come into the real productivity.
补偿软件的编写是误差补偿技术走向实用化的重要步骤。
the national, state and local regulations regarding compensation and payroll taxes, and health care software companies to have physicians, nurses or other medical specialists.
这些名字背后的职位具有同一特征:他们都是某一领域的专家。 举个例子,税务软件公司的员工中有税务专家;薪金服务公司员工中有深谙国家、州和当地薪金税率法规的专家;健康软件公司员工中有内科医生、护士和其他医务专家。
Then, through the model, we can finish easily the accelerometer's temperature error compensation on the software design.
然后,利用所得到的静态温度模型对该加速度计进行温度误差软件补偿。
The accuracy of angular displacement was increased greatly by software error compensation according to the error model and parameters.
根据误差模型及系数,采用软件进行误差补偿,有效地提高了测角系统的精确度。
The programs for monitoring and displaying are designed using WINCC. The methods for improving efficiency and precision by error compensation and perfect software design are adopted.
采用WINCC设计测长监控与显示程序,并利用误差补偿技术及完善的软件设计方法,保证了测长系统的高效准确。
In this thesis, we take software enterprises in China for instance and research on the application of competence model in compensation scheme.
本文基于这一前提,以我国的软件企业为例,研究了胜任力模型在薪酬模式中的应用。
Hardware and software design of reactive power automatic compensation controller for low-voltage distribution systems is introduced.
介绍了低压配电网无功功率自动补偿控制器的软件和硬件设计方法。
In a complete hardware system based on the temperature compensation system software design.
在系统硬件的基础上完成了温度补偿系统的软件设计。
To solve the optic axis offset of the TV camera, this article proposed a dynamic software compensation technology in continual focal variation process.
为解决电视摄像机在连续变焦过程产生光轴线的偏移问题,提出了一种动态软件补偿技术。
In the experiments of measurement and software compensation of diamagnetism, it is found that stray fields mainly come from the vertical field, plasma current and eddy current.
在杂散场测量与软件补偿实验中,发现同心圆逆磁线圈感应的杂散信号主要来自垂直场、涡流电流、等离子体电流和纵场电流的变化。
The software compensation of geometric error is realized in 4-coordinate NC machine tool.
在4坐标数控机床上实现了几何误差的软件补偿。
This paper shortly introduces the composition, function and process of the 'gyroscope drift measurement and compensation system' in hardware and software.
从硬件、软件两方面简要介绍了所研制的“陀螺仪漂移测试与补偿系统”的组成结构、控制功能及工作过程。
In this paper, the system's composition, burden process, error analysis, compensation and software are introduced.
本文介绍了该系统的组成、配料过程、误差分析与补偿以及系统软件。
The method for the compensation of FOG temperature bias can be divided into the hardware method and the software method.
光纤陀螺温度补偿方法可以分为硬件补偿方法和软件补偿方法。
An algorithm of post processing for space radius compensation is presented, independently developed a post processing software.
文章提出了一种空间刀具半径补偿后置处理方法,自主开发了五轴机床的后置处理软件。
Various compensation programs were studied based on error compensation way of software.
基于软件误差补偿方法,研究了各种补偿方案。
Aiming at the problem that hardware compensation has the shortcomings of high cost and low precision, a software compensation model based-on RBF is suggested.
本文针对在压力传感器电路中采用温度硬件补偿措施成本较高且精度不高的情况,建立了R BF网络软件补偿模型。
Establishing model and compensating by software is simpler and the accuracy of measurement is higher than those of hardware compensation.
用软件对膜式溶氧电极进行建模补偿,形式很简单,且由此得到的测量溶氧值精度比硬件补偿要高。
It measures excess phase of voltage current by using digital circuit, Based on the reactive compensation theorem, the software hardware of the controller is deigned.
该控制器采用数字检测电路来获取电网电压与电流的相位差,从无功补偿的原理出发,设计控制器的软硬件。
If no calibrationconditions, can be corrected by the calibration software experience, the temperature correction and compensation;
如果用户暂时没有标定条件,可以通过经验标定矫正软件,进行温度校正和补偿;
Hardware compensation and software compensation methods for nonlinearity in the sensor signal are introduced.
针对传感器信号中存在的非线性误差,介绍了硬件补偿和软件补偿两种方法。
In this paper, the system of compensation control for lining and lifting of continuous tamping machine is analysed and designed, including two parts of hardware and software.
本文对连续式捣固车起拨道补偿控制系统进行了分析与设计,包括硬件设计与软件设计两部分。
Temperature performance and linearity were improved with software compensation.
利用软件补偿处理,提高了陀螺的温度性能和线性度。
Moreover, the measurement accuracy is increased in temperature compensation by the software. It has the advantage of high accuracy, wide application and low cost.
因采用软件进行温度补偿,进一步提高了测量精度,具有测量准确、适用范围广、成本低等优点。
The software of the circuit board and compensation algorithm is developed on the basis of the actual operating conditions and manuals.
根据实际作业情况与操作手册,开发了电路板的控制软件,补偿控制算法也由软件来实现。
The text proposed the temperature compensation with the artificial neural networks to it the software compensation technology.
提出和研究了用人工神经网络对其进行温度补偿的软件补偿技术。
The design of the hardware and software of the tension control system and the establishment and compensation of the mathematical model are presented concretely.
具体介绍张力控制系统的硬件、软件设计,数学模型的建立与补偿等。
Simulation results showed that software image motion compensation method can accurately compensate for the whole pixel level of image motion amount to ensure the resolution of remote sensing images.
仿真实验表明,软件式像移补偿方法可以对整像元级别的像移量进行精确补偿,保证遥感图像的分辨率。
Simulation results showed that software image motion compensation method can accurately compensate for the whole pixel level of image motion amount to ensure the resolution of remote sensing images.
仿真实验表明,软件式像移补偿方法可以对整像元级别的像移量进行精确补偿,保证遥感图像的分辨率。
应用推荐