In the end of the paper the calculated results are compared with the experimental results.
最后，将计算结果和试验结果作了比较。
Compared with the experimental results, the suggested formulas are high in precision, wh...
试验结果表明，这些公式计算精度较高，可满足工程设计要求。
At last, the numerical results of the modeling analysis are compared with the experimental results.
最后把模型计算的结果与国内外实验结果进行了初步比对。
The simulated results are compared with the experimental results and are found to be in good agreement.
将模拟结果和实验结果进行了对比，吻合较好。
The numerical results are compared with the experimental results anb the prediction of theoretical micromechanics analysis. Good a…
数值计算结果与实验结果、理论结果进行比较，具有很好的一致性。
The theory result of photo-electric bistable system is compared with the experimental results by the results computer simulated experiment.
最后我们对光电混合型双稳态理论和实验结果通过计算机模拟结果进行了比较。
The border of laser beam penetration welding seam is simulated by the constructed heat source model and compared with the experimental results.
应用所建立的热源模型模拟分析了激光深熔焊焊缝边界形状，并与实验结果进行了比较。
The distribution of the time-averaged velocity and turbulence intensity was studied, and some of the simulation results were compared with the experimental results;
全面地分析了矩形射流气相时均流场的速度、湍流强度的空间分布规律，并就部分数值模拟结果与实验结果进行了对比研究；
The relevant codes are programmed, and also employed to analyze centrifuge tests on a pile group, and the computed results are compared with the experimental results.
根据该方法编制了相应的计算机程序，实例分析表明，本文程序计算结果与实测结果吻合较好。
Compared with the experimental results, the position, width and peak of distribution of states in gap, and also the electron mobility, cross section ot capture are obtained.
与实验比较，给出了隙态分布的位置、宽度和高度，也给出了电子迁移率和复合系数。
Compared with the experimental results, the simulation indicates that the dynamic simulation model can provide a good modern design method for research and performance analy...
结果表明，所开发的参数化仿真模型为真空断路器操动机构的开发设计和性能分析提供了一种高效的现代设计方法。
To verify the reliability of FEM results, the stress distribution of deformation is measured with mesh method, and the analysis results are compared with the experimental results.
用网格法测量了半球形冲头胀形时的应力分布，并将有限元计算结果与实验结果进行了对比，验证了有限元分析结果的可靠性。
The temperature field of concrete box girder is analyzed by means of the finite element analysis software ANSYS. The computational results are compared with the experimental results.
应用大型有限元分析软件ANSYS，模拟箱形梁水泥水化生热和对流边界条件，进行混凝土水化热温度场仿真计算，并与实测数据进行对比分析。
A computational fluid dynamics model was used to simulate the flow field of catalytic converter, and which was compared with the experimental results as to demonstrate the model validation.
通过采用计算流体力学数学模型对催化转化器内流场的数值模拟，并与实验结果进行比较，验证了模型的准确性。
Dynamic response of a single pile under strong horizontal excitation is analyzed using boundary zone model in this paper, and compared with the experimental results for large-scale model pile.
本文采用边界层模型分析了单桩在强烈水平激振作用下的动力反应，并且与大尺寸的模型桩的动力试验结果进行了对比。
The computation results using the models in this thesis are compared with experimental data and other numerical results.
利用本文数值模型的计算结果与他人的数值结果和试验结果进行了比较。
Some of the results obtained are compared with experimental data.
某些导数的计算结果与实验结果作了比较。
The results computed by ROTOR are compared with those by the software of Westing House Corporation and experimental result.
将ROTOR的计算结果与美国西屋公司的相应软件的计算结果及试验结果进行了比较。
The DC drift is evaluated and compared with some experimental results.
估算了直流漂移值并同实验结果作了比较。
According to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.
根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。
The main factors to impact the ductility of SRHSHPC frame columns is theoretically analyzed, and is compared with their experimental results.
同时又结合试验提出了延性与其影响因素的关系式，以期为以后的延性抗震设计提供理论依据。
Meanwhile, theoretical results are compared with experimental results so that the author can get the effective ratios of separate copper in samples.
同时，将理论结果和实验结果进行比较，得到了样品中分离铜的有效比率。
The fragments distribution characteristics of fragile tungsten alloys were studied by means of exploding tungsten alloy cylinders. The experimental results were also compared with that of 93w alloy.
采用圆筒爆破试验方法研究了易碎型钨合金的破片分布特征，并与93W合金的结果进行了对比。
The results are compared well with the experimental data that in turn verifies the proposed numerical simulation strategy and method.
结果表明本文采用的分析复合材料结构耐撞性能的模拟策略和方法及建立的有限元模型是合理可行的。
Compared with the analytical and experimental results, it is confirmed that the permanent magnet eddy-current brake is an effective braking method and FEM is suitable for analyzing it.
实验结果和理论分析表明永磁涡流制动是一种高效可靠的制动方法。通过与解析法和实验结果的比较，证明用有限元法分析永磁涡流制动的可行性和准确性。
Results: compared with control group, the fracture resistance in the experimental groups were lower.
结果：各实验组抗折能力均低于对照组。
Numerical results are compared well with experimental results, thus the established FEM-based numerical strategy and means is verified.
数值模拟的结果与试验结果吻合得比较好说明了所建立的模拟复合材料结构耐撞性的策略与方法是可行的。
Compared with the experimental data, the simulation results have demonstrated the effectiveness of this proposed analysis method.
与实验数据对比，证明该计算方法的准确。
The computational results of typical case are compared with experimental data, and they have the same variation trend.
典型算例的计算结果还与实验结果进行了对照，它们的变化趋势是相同的。
The computational results of typical case are compared with experimental data, and they have the same variation trend.
典型算例的计算结果还与实验结果进行了对照，它们的变化趋势是相同的。
应用推荐