On the basis of test, EMI source in E1coaxial line is analyzed, different suppression techniques are compared and optimized filtering circuit is chosen.
在试验研究的基础上，对E1同轴传输线上电磁骚扰源进行了分析，测试比较不同的滤波抑制措施，确定了优化的抑制方案。
Then, the technical schemes of central air condition system was compared and optimized in aspects of prophase investigation, system control and communication method by practical case.
结合实际情况，从前期调研、系统控制方案、通讯方案等几个方面对中央空调轮停的技术方案进行比较，优选实施方案。
Using innovative techniques and components, EMC's EFDs have been optimized for writes and longevity, The result is a significant improvement in EFDs write times, as compared to HDDs.
通过使用创新性技术和组件，EMC的EFD进行了写操作和使用寿命优化。这样EFD的写操作响应时间相对于HDD有了很大的改进。
Based on this, the design of casting process was optimized, the solidification process was simulated again, the results of simulation were compared and analyzed.
在此基础上对其铸造工艺进行了修改，工艺优化，又一次进行凝固模拟，对前后模拟结果进行了分析与比较。
The measuring methods for diacetyl content in beer including EBC method, GC method and chemical radiation method were optimized and compared.
对EBC法、气相色谱法和化学发光法测定啤酒中的双乙酰含量进行了优化和比较。
Compared with the currently prevailing maintenance modes, the optimized maintenance modes can reduce the operation and maintenance costs by 34%.
与现行维修方式相比，优化后的维修方式能降低运行与维修成本34%。
Modeling of crank shaft connecting rod slippery piece mechanism and process of optimization design were introduced, and its optimized result was analyzed and compared.
阐述了曲柄连杆滑块机构的建模、优化设计计算的过程，并分析比较了其优化结果。
By continually practiced and compared, "13-9-5-6" double hidden layers with optimized training structure are confirmed.
通过不断试验比较，以优化网络结构为目标，最终选定13-9-5 - 6的双隐含层结构。
Using virtual wafer fabrication technique, different structures of high voltage LDMOS's are analyzed and compared, and optimized structures are obtained.
采用虚拟制造技术，分析比较了多种结构，对器件结构进行了优化。
METHODS:Based on the extraction rate of chlorophyll, acetone method was compared with alcohol method and the preparing factors of acetone method was optimized by orthogonal design.
方法：以叶绿素提取率为指标，对脱镁叶绿酸制备的乙醇法和丙酮法工艺进行比较，用正交试验法对丙酮法 的工艺条件进行优化。
The performance of the two carriers was compared and the fermentation techniques were optimized.
比较了两种方法和载体性能，并优化发酵工艺。
Photovoltaic devices were fabricated and characterized, and the effect of different preparation methods of Pt on performance were compared, and also was optimized preliminarily.
制备了光伏器件并进行了光电测试，比较了不同反电极制备方法对电池性能的影响，并进行了初步的优化。
At last, the optimized bearing of the extrusion die was analyzed by FEM and compared to the design with experiential way.
最后通过有限元数值模拟技术验证并比较优化所得工作带与经验法确定的工作带对金属流动均匀性的影响。
In the MATLAB, the antenna simulation is done about the vibration control, compared response before optimization and after, verify that response after optimized has been better results.
而后利用有限元软件MATLAB，对天线振动控制进行仿真，比较作动器优化前后的天线振动响应，经过作动器优化后的天线结构振动得到了更好的抑制效果。
Compared with different synthetic methods and based on the previous researches in our laboratory, synthetic methods of these compounds were optimized.
通过对这些化合物不同合成方法的比较，结合本研究室以前的研究成果，我们对这些合成方法进行了优化。
Compared with the conventional optimization results, it is showed that the weight and the volume of heat exchanger optimized in this paper are both reduced.
与传统的优化计算结果比较，换热器的重量和体积都有不同程度的减小。
Different plans are compared, and the injection molding process is optimized.
在不同方案的比较中展开优化设计，并提出优化设计方案。
The synthesis processes were optimized, and the effects of durable press finishing for cotton fabric were compared.
探讨了聚马来酸和聚马来酸酐的最佳合成工艺，并比较了其对棉织物的抗皱整理效果。
The analytical methods for OCPs were also studied. Analytical parameters of GC-MS and detection conditions of GC-ECD are optimized, and the performance parameters of the two instruments are compared.
对有机氯农药的检测方法进行研究，实验优化了GC - MS的分析参数以及GC - ECD的检测条件，并将两种仪器的性能参数进行对比。
At last, control performance of optimized control rule and membership function are compared with that of PID and traditional fuzzy control system.
并利用寻优获得的隶属函数和控制规则与PID算法、常规模糊控制算法控制同一被控对象的响应结果进行了对比分析。
Taking the data acquired by box array, the suppressing effect of different 3-d vector combinations was compared, and the favorable geophone combination was optimized.
以方形阵列采集的数据为基础，对比了不同三维矢量组合方式压制抽油机噪声的效果。
Visual method based on nanogold-supported probes was optimized and used to detect HBV extracted from positive serum samples, which was compared with fluorescence method based on FITC-labeled probes.
优化了基于纳米金标记探针的目视化检测方法，将其用于检测从阳性血清中提取的乙肝病毒(HBV)基因，并与基于荧光素异硫氰酸酯(FITC)标记探针的荧光检测方法进行了比较。
Optimized model is compared with original model and the surface growth effect is described qualitatively.
将优化后的模型与原模型进行了对比，同时定性分析了表面生长效应。
Optimized model is compared with original model and the surface growth effect is described qualitatively.
将优化后的模型与原模型进行了对比，同时定性分析了表面生长效应。
应用推荐