Air CYCLE MACHINE, a compressor and turbine on a common shaft for cooling the air in an air conditioning system.
涡轮冷却器，是装在同一根转轴上的压气机和涡轮，用于冷却空调系统中的空气。
Pump and motor share a common shaft for short axial dimensions, making it working more smoothly and little noise.
泵与电机同轴，轴向尺寸短，使泵运行更加平稳，噪音低。
Mechanical concept is based on a double ball bearing design, and is available as a solid-shaft or hollow-shaft version in common shaft diameters.
机械概念是基于双滚珠轴承设计，并作为固体轴或空心轴直径共同轴版本。
The mechanical concept is based on a double ball bearing design, which is available as a solid-shaft or hollow-shaft version in common shaft diameters.
机械概念是基于双滚珠轴承设计，它是一种固态轴或空心轴直径共同轴版本。
The Baumer Hübner combinations are characterized by a common shaft with bearings at both ends and at least one sensor system mounted between the bearings.
宝盟夜蛾的组合是由两端和至少一个传感器系统，轴承安装的共同特点是轴的轴承之间。
Mechanical seal leakage, the sleeve and the shaft leakage between (inter-axis leakage) is relatively common.
机械密封泄漏中，轴套与轴之间的泄漏是比较常见的。
Background: Fractures of the femoral shaft are common and have potentially serious consequences in patients with multiple injuries.
背景知识：股骨干骨折非常常见，而且在多发性损伤的患者中有潜在的不良后果。
To refit a crank-shaft press into P/M automatic press is a common way for some small-scale factories.
利用曲轴冲床改装为粉末冶金自动压机，是一些小型企业常用的方法。
Tap valve on the common market, there are three: stainless steel ball valve, ceramic valve core and valve shaft roll style.
市场上常见的水龙头阀芯有三种：不锈钢球阀，陶瓷片阀芯和轴滚式阀芯。
Shaft parts are one of the most common components in the machining process, determining the working procedure dimension plays a leading role in shaft parts processing.
轴类零件是机械加工中最常见的零件之一，工序尺寸的确定在轴类加工过程中起着主导性作用。
Results of displacement, stress and strain of the shaft under the common loads of bend and torsion are obtained by Pre-condition conjugate gradient method.
对该模型施加适当的约束和载荷，通过预前共轭梯度法，计算得到了轴类零件在常见工况-弯曲和扭转载荷作用下的位移、应力、应变等力学特性。
Based on the prediction results, the 840 samples are classified into five: methane, carbon dioxide, combined shaft, common and prediction failure.
从预测结果来看，把840个样品分成五类：甲烷、二氧化碳、混合、一般、预测失败。
Objective: To comparatively analyze the treatment of tibial shaft fracture by using common plate or common plum shaped intramedullary nail and choose a better method for the clinicians.
目的：对比分析普通钢板和普通梅花型髓内针手术治疗胫骨干骨折的疗效，为临床选择一个更好的治疗胫骨干骨折的方法。
Objective: To study the different effect of fixation in the fractures of long shaft bone with common and intramedullary interlocking nail.
目的探讨普通与交锁髓内钉固定长管状骨骨折有何差别。
To improve the drawing's efficiency, the interface software of common CAD based programmed parametric drawing for the shaft parts is studied.
为提高绘图效率，本文以轴类零件为例，研究了通用CAD程序式参数化绘图的接口软件。
Bodywork is jointed by armor plate, and transmission shaft is adopted common mechanical cutting to process.
车体主要使用钢板焊接，浮动轴采用普通机械切削方法加工。
The shaft is the important part of a machine and the most common part, and also the core of design of moving parts in the machine products.
轴是组成机器的重要部分，是最常用的机械零件，也是机械产品中运动部件设计的核心。
The idol was actually a wooden shaft with a mask attached, garlanded with ivy - perhaps the most common way of depicting Dionysus in the Greek world.
神像实际上是一个以面具附上的木轴，戴著长春腾花环，这或许是在希腊世界中最普遍的描述戴奥尼索斯的方法。
The results show that for the common pump control methods, the third power relation between the pump rotate speed(water volume) ratio and the shaft power ratio is not true;
分析结果表明，对于常用的水系统控制方式而言，水泵转速（流量）比与轴功率比的三次幂关系不成立；
The article introduces the structure and common fault of main shaft in KJ-type hoister and suggests some ways of fault disposal according to the analysis of the fault.
介绍了KJ型提升机主轴装置的结构及常见故障；针对故障进行认真分析，提出故障的处理方法。
The purpose is to present a common theory and method of shaft frame hardness testing and data processing.
旨在提供井架强度测试及其数据处理的一般理论和方法。
Considering the common failure features of driving shaft and common working condition, the mechanics analysis and finite element calculation were conducted.
针对传动轴常见失效特征，结合常用工况，进行了力学分析和有限元计算。
One steam turbine is a condensing machine, the other a heating turbine and both drive one common generator through one single shaft line.
一个汽轮机冷凝机，另一种加热涡轮机和两个驱动器通过单一轴线的共同发电机。
Conclusion Croos-medullary nailing is effective method in management of femoral shaft fracture. It expands the indications as compared with the common intra-medullary nail...
结论应用股骨带锁髓内钉治疗股骨干骨折是一种确实有效的方法，带锁髓内钉的临床应用扩大了普通髓内钉的适应证。
The hypoid gear is in common use today due mainly to the fact that the offset pinion allows the propeller shaft to be set below, (for cars) or above, (for commercial vehicles) the crown wheel center.
现在的主减速器普遍使用准双曲面圆锥齿轮，这主要是因为 主动锥齿轮的偏移允许轿车上传动轴布置得比从动锥齿轮低 一些，而商用车上又允许布置得比从动锥齿轮高一些。
Agricultural universal joint transmission shaft is a common part for connecting P. T. o of the tractor with power-driven implements.
农用万向节传动轴是联结拖拉机动力输出轴与驱动型农机具重要的通用性部件。
The problem of scaling in oilfield injection process is common. It can occur in the bottom and every part of the shaft.
结垢是油田注水生产过程中普遍存在的问题，可以发生在地层和井筒的各个部位。
The problem of scaling in oilfield injection process is common. It can occur in the bottom and every part of the shaft.
结垢是油田注水生产过程中普遍存在的问题，可以发生在地层和井筒的各个部位。
应用推荐