Strip thickness control is one of the most important control links in cold strip production.
带钢厚度控制是冷轧带钢生产中最重要的控制环节。
Speed control system of skin pass mill in Cold Strip Rolling Mill of Wuhan Iron & Steel Group Company is introduced.
介绍武钢冷轧厂平整机的速度控制系统。
The hot strip local high points have very important influence on the internal stress distribution and thickness of cold strip.
热轧带钢局部高点对冷轧带钢板厚和内应力分布具有重要影响。
The high speed steel (HSS) as a roll material significantly increased the service life of hot and cold strip milling work rolls.
高速钢用作轧辊材料使冷、热带钢工作辊寿命得到大幅度提高。
This paper briefly introduces the major technical performances, basic design features and formation of the four-high cold strip mill.
本文简要介绍了四辊精密冷轧机的主要技术性能、设备的组成和特点。
The article describes the function, process and component of hot strip skin pass mill and makes comparison with cold strip skin pass mill.
介绍热带钢平整的作用、工艺及设备组成，并与冷带钢平整设备做比较。
And so, trustworthy basis is provided for the investigation on reducing the strip breaking at weld seam by Miebach welder in cold strip rolling.
为减少米巴赫焊机焊缝在冷连轧时断带的研究提供可靠依据。
The production result indicates that the shape quality of cold strip has been greatly improved with the help of the developed strip temperature model.
生产结果表明，使用拓展的带钢温度模型控制轧制的冷轧薄板极大地提高了板形质量。
The article describes application of steering unit into cold strip rolling line, and design features and function of automatic measuring steering unit.
介绍带材纠偏设备在冷轧生产线上的应用和自动检测纠偏装置的结构特点及功能。
The traditional rolling force model of 4-stand tandem cold strip mill at Anshan Iron and Steel Corporation was analyzed, and some defects were found out.
分析了鞍钢冷轧厂4机架冷连轧机轧制力模型，指出了其存在的主要缺陷，并提出了改进方案。
The main characteristics and application of developed software for flatness analysis and presetting control of cold strip rolling (FAPCSR) are introduced.
介绍自主开发的冷轧带材板形分析及预设定控制软件——FAPCSR的主要特征及工业应用情况。
The test of double stepped backup rolls on 4 stand tandem cold strip mill at Anshan Iron and Steel (Group)Co. and the good results obtained are introduced.
简述鞍钢冷轧厂四机架冷连轧机采用双阶梯支承辊的试验及取得的良好成果。
The theory of rolling cold strip in stable status is analyzed and the possibility of transformation from one equilibrium to another is discussed quantitavely.
分析了冷轧带钢在稳态轧制下的理论，从量的角度探讨了从一个平衡状态向另一个平衡状态过渡的可能性。
This paper also describes the successful application of optimized highly adaptive backup rolls on 4 stand tandem cold strip mill at Anshan Iron and Steel (Gr…
叙述了强适应性支撑辊在鞍钢冷轧厂四机架冷连轧机上的成功应用及取得的良好效果。
The optimization for the load distribution of tandem cold rolling plays an important role in improving the quality and increasing the output of the cold strip.
冷连轧负荷分配最优化对于提高冷轧带钢的产量和质量具有至关重要的作用。
This paper simply analyses the work of the exisiting backup rolls, and brings forward a project to optimize the backup rolls on 4 stand tandem cold strip mill.
在简要分析原辊型配置应用情况的基础上，提出了对四机架冷连轧机支撑辊型配置（包括辊型曲线和辊型凸度）综合优化的方案。
Asynchronous one-stand-tandem mill (ACSTV) is a new type rolling mill, which allows to accomplish several rolling passes on one stand and can produce thin cold strip.
异步单机连轧机是一种可以在一台轧机上进行多道连轧、生产冷轧薄金属带的新型轧机。
The severe corrosion of stainless steel fastening bolts on Electrolytic Galvanizing Line(EGL)in cold strip mill plant under current working conditions has been studied.
采用浸泡、电化学、模拟试验以及拉伸试验对冷轧厂电镀锌机组不锈钢紧固螺栓在现行工艺条件下遭受严重腐蚀进行了研究。
The paper describes the general situation of the Leveling and recoiling line, its features, elevation arrangement ect of the cold strip mill of tangshan Iron and Steel Co.
简要介绍了唐钢冷轧带钢拉矫重卷机组的总体情况、机组特点、立面布置等。
The object of the optimization system is the 4-stand tandem cold strip mill, the target function is strip gauge and shape, and the optimization method is genetic algorithms.
优化方案是以四机架冷连轧机为对象，以板形板厚为目标函数，以遗传算法为优化方法进行设计的。
Under the width to thickness ratio 625 of strip, this paper studies the 3-dimensional stress distributions of cold strip rolling by cubic spline function finite strip method.
本文在轧件宽厚比为625的条件下，用三次样条函数有限条法研究了冷轧带材三维应力的分布问题。
On the basis of analyzing factors to influence the rolling model of tandem cold strip mill and combining rolling theory with experiment, a new rolling force model was developed.
在分析冷连轧机轧制力模型各种影响因素的基础上，通过理论推导结合现场试验建立了新的轧制力模型。
The heat treatment processing and performance control of rolling process have been studied in this paper. The results are useful for new-built or modification of cold strip rolling line.
就冷轧板带钢的热处理工艺及其性能控制等轧制生产工艺理论进行了具体的研究和探讨，这对于将要新建或改造的冷连轧生产线均具有实际指导意义。
The optimization design of highly adaptive backup rolls is used on the 4 stand tandem cold strip mill. The target function is strip shape, and the optimization method is genetic algorithms.
强适应性支撑辊的优化设计是以四机架冷连轧机为对象，以板形为目标函数，以遗传算法为优化方法进行设计的。
VAI can offer such a complete "quality package" from reversing mills to linked tandem mills which helps to produce cold strip with the highest quality and productivity but under the lowest costs.
前言：奥钢联可提供从可逆式轧机直到冷连轧联合机组的整套质量包，以高生产率和低成本生产优质冷轧带钢。
Precisely forecast strip thickness at the exit of cold tandem mill's each stand has very important significance for perfect automatic gauge control system and improve quality of product.
准确预测冷轧机各机架出口带钢厚度对于完善自动厚度控制系统和提高产品质量具有重要意义。
The effect of rolling oil foaming on product quality in the rolling process of cold rolling aluminum sheet strip was discussed.
通过分析冷轧铝板带材轧制过程中轧制油起泡对产品质量的影响，阐述了轧制油起泡的原因，并提出了针对轧制油起泡的对策。
Stainless steel customers demanding stainless steel in a more finished state such as tubing, pipe, and cold-rolled strip from rerollers and tube makers.
不锈钢客户要求不锈钢的处理尽善尽美，如管子，来自于制管者及再轧机的冷轧带。
Stainless steel customers demanding stainless steel in a more finished state such as tubing, pipe, and cold-rolled strip from rerollers and tube makers.
不锈钢客户要求不锈钢的处理尽善尽美，如管子，来自于制管者及再轧机的冷轧带。
应用推荐