One of the principal equipment components of a coiled tubing unit.
挠性管作业机的主要设备部件之一。
SPECTRUM Diagnostic Services coiled tubing is deployed to the bottom of the well.
SPECTRUM诊断服务的连续油管完全下至井底。
The profiled blocks attached to the drive chains of a coiled tubing injector head.
固定在挠性管注入头的传动链上的定型块。
[Abstract] : Coiled tubing unit is now increasingly used in the oil and gas industry.
[摘要]:目前,连续油管作业机在油气行业中的使用越来越广泛。
A technique used in the assembly of coiled tubing strings at the manufacturing plant.
挠性管柱在制造厂装配时所用的一种技术。
A generic term relating to the use of a coiled tubing string and associated equipment.
关于挠性管柱和相关设备的通用术语。
Coiled tubing(CT) life is very short, which is main fact to affect cost of CT services.
连续油管工作寿命短是影响连续油管作业成本的主要因素之一。
The affecting factors and degrees on the bending of coiled tubing drill pipe are analyzed.
分析了连续管钻杆弯曲状态的各种影响因素及影响程度。
The device used to store and transport a coiled tubing string ready for use at the wellsite.
存放和运送挠性管柱使它随时可在井场使用的装置。
Offshore coiled tubing (CT) operations in demanding environments on fixed and floating facilities.
海上固定、浮动设施,有需要连续油管(CT)作业的情形。
The tension applied to a coiled tubing string as it passes between the reel and the injector head.
当挠性管柱在卷筒与注入头之间经过时施加在挠性管上的拉力。
The depth at which a tubing or coiled tubing string that is stuck in the wellbore is free to move.
在井筒中被卡住的油管柱或挠性管柱能够自由移动的深度。
Drag the acidification of coiled tubing technology is in this context to develop a new output technology.
连续油管拖动酸化技术正是在这种背景下开发出的一种新的增产工艺。
A condition that may occur when a coiled tubing string is run into a horizontal or highly deviated wellbore.
在挠性管柱下入水平井或大斜度井井筒中时可能发生的一种状况。
The gripper blocks are arranged in opposing pairs to secure the coiled tubing string in the injector-head chains.
它们相对成双排列,以便将挠性管柱紧固在注入头的链中。
Coiled tubing is the key equipment of the coiled tubing machine. It is important to test and inspect its condition.
连续油管作为连续油管作业机的关键设备,对其工作状况进行检测是十分必要的。
The excess material formed on the internal surface of a coiled tubing string by the longitudinal weld during manufacture.
挠性管柱在制造时由于纵向焊接在其内表面所形成的多余物质。
By locking conditions, the analysis pointed out the increase under paragraph coiled tubing in horizontal depth of approach.
通过对锁定条件的分析,指出了增加连续油管在水平段下入深度的途径。
When working, coiled tubing is loaded by bending, drawing and inside pressure, so that it would bear three dimension stress.
连续油管在工作时除受卷绕弯曲和拉伸载荷作用外,管内常受到内压作用,承受三轴应力。
The problem of the behaviors of coiled tubing down-hole buckling is the key of the success of coiled tubing down-hole operation.
连续油管井下屈曲行为问题是连续油管井下作业成败的关键性问题。
This underdisplaced volume of proppant will have to be removed by coiled tubing prior to production (see Section 2.4.3 for techniques).
在生产之前,通过连续油管,可以消除支撑剂未置换体积(相关技术,参见第2.4.3)。
The coiled tubing fault tree is constructed based on field investigation and relevant literature by use of the fault tree analysis theory.
结合现场调研和有关文献资料,根据故障树分析理论,用演绎法建立了连续油管的故障树。
A coiled tubing string is generally used to apply the treatment, which involves running to depth while pumping high-pressure nitrogen gas.
挠性管柱一般用来实施处理作业,它包括下至一定深度并泵入高压氮气。
The natural form that a section of coiled tubing string will take if spooled from the reel and allowed to rest without any tension applied.
如果挠性管从卷筒上放出并停歇时没有施加任何拉力,在这种情况下一段挠性管柱将会采取的自然形状。
This paper studies the affection that the flowing force of fluid inside coiled tubing is correlated to longitudinal vibration of coiled tubing.
研究了连续油管柱内流体的液动压力对连续油管柱纵向振动的影响问题。
A support structure used to stabilize the injector head and pressure-control equipment on some offshore, or special onshore, coiled tubing units.
在某些海上挠性管作业机或特殊陆上挠性管作业机上用于使注入头和压力控制设备稳定的支承构架。
The results of field application show that the coiled tubing can be tripped normally in the wellbore without encountering sticking and resistance.
现场应用结果表明:连续管可以在井筒内正常的起下,不会发生遇卡或遇阻的情况;
The factors that have influences on coil tubing properties and service life were analyzed, and the mechanism of failure of coiled tubing are discussed.
分析了挠性油管的性能及其使用寿命的影响因素,并对挠性油管在使用过程中出现的各种破坏机理进行了探讨。
Coiled tubing have relatively poor working conditions and complex force state. In the forms of failure, fatigue fracture failure is the larger proportion.
连续油管工作条件恶劣,受力状态复杂,失效形式中疲劳断裂所占比例较大。
The principle and approach of constant magnetic measurement for diameter of coiled tubing is introduced, and an instrument for the measurement is designed.
介绍了连续油管直径恒磁测量原理及方法,给出了测量装置的构成和实验数据,分析了其测量精度。
应用推荐