Optical fibres - Part 1-21 : measurement methods and test procedures - Coating geometry.
光学纤维。第1-21部分：测量方法和试验程序。涂层几何形状。
The abrasion, impact and adhesion test was conducted with nylon 1010 coating.
对尼龙1010涂层做了磨耗、冲击和附着力试验。
In this paper, the influence of various parameters on suspension shearing dry strength and permeability of EPC coating used on steel casting through right Angle test was studied.
通过正交试验，研究了各因素对真空实型铸造铸钢件涂料的透气性、干强度、剪切力、悬浮性的影响。
In the test the solder ability plating coating.
在测试电镀镀层的焊锡能力。
The test probe is also applied through openings in earthed metal enclosures having a nonconductive coating such as enamel or lacquer.
试验探棒还需穿过在表面覆盖一层非导电涂层如瓷釉或清漆的接地金属外壳的开口。
Test used to check for adhesion of a coating to the surface usually following a mechanical test.
通过一个机械试验检查表面涂层的附着力。
This test is used as a common method for expressing corrosion resistance of a coating system.
这种雾也可以是酸性的，这种试验是表述涂层耐腐蚀性能一个通用的方法。
Physical bending test for evaluating flexibility of a coating.
评估涂料柔韧性的物理弯曲试验。
The preparations before test shall include corrosion check, mechanical inspection, vehicle photo, coating thickness measurement, metal thickness identification, paint layer scratch and etc.
试验前的准备工作包括腐蚀检查、机械检查、车辆拍照、涂层厚度测量、金属厚度识别及油漆层划线等。
By combining with cutting test and practice, the criterion of machining of the hot spraying coating is discussed.
结合切削试验和实践，讨论了热喷涂涂层机械加工的一般原则。
This paper introduces the test principles and the technical advantages of alternating current impedance test method for testing the anti-corrosion properties of pipeline coating.
本文介绍了交流阻抗试验方法测定管道和大型油罐防腐涂料防腐性能的优点及测试原理。
The anti-corrosive mechanism, preparation procedure in lab, manufacture process, performance test and application fields of Zn-Cr coating technology are introduced.
介绍了锌铬膜涂层的防腐蚀机理、实验室制备过程、生产工艺过程、性能检测和应用领域；
The ageing process and regularity of the asphalt coating have been studied with indoor artificial accelerated ageing test.
为此，采用室内人工加速试验方法，研究了石油沥青涂层的老化过程和规律。
The test results prove that the coating shows excellent weatherability, durability, chemical resistance, insulating property, non-sticky performance and environmentally friendly features.
通过测试可知，这种涂料具有优异的耐候性、耐久性、耐化学药品性、绝缘性、不粘性和环境友好性。
The coating material the laboratory test and situation of field application of this technique are proposed also.
还介绍了涂料与这项技术的室内试验、现场应用情况。
This paper introduces application technique and performance test of powder coating in experimental production for large - diameter steel plate - welded pipe.
主要介绍大直径钢板焊接钢管涂敷环氧粉末涂层实验性生产中的施工技术及涂层性能测试。
The third test: the effect of several seed coating agents on the growth and development of cotton.
第三个试验：种衣剂包衣处理对棉花生长发育的影响。
Introduce the result of several type of liquid Optical Brightening Agent (OBA) test, commend the test method of OBA use for coating color.
介绍了几种液体增白剂的性能试验结果，及用于铜版纸涂料中的液体增白剂的选择试验方法。
The study on the coating material has been made on basic material selection, additive and solution analysis, performance test and field application.
从这种防腐涂料的基料选择、颜填料及溶剂分析、性能试验及现场应用等几个方面进行了研究。
After the coating solidifying, the pipe test should be done with defect detector under the specified voltage.
待涂层固化当前，要应用缺陷检测器在涂料技术标准中规定的电压下对钢管进行检测。
In the article the process flow, reagents prescription for manufacture of water emulsion type waterproof coating by using spent polystyrene and test method of product performance were reviewed.
介绍了利用废聚苯乙烯泡沫塑料制备水乳型防水涂料的工艺流程、配方及其性能测试方法。
Decorative requirements of the higher parts can choose ultra-thin fire retardant coating. 4 fire coating thickness should directly adopt the fire test data of actual components.
装饰要求较高的部位可选用超薄型防火涂料。4防火涂料的厚度，宜直接采用实际构件的耐火试验数据。
While under the same test conditions, samples without coating have undergone severe damages on both the surface and the fracture section.
而在同等条件下未涂层试样不论是表面还是断口处都已遭受了较为严重的破坏。
Meanwhile it introduces the results of manual coating acceleration test, salt spray test, damp and hot resistance test and the natural exposed test for one year under the various weather conditions.
并介绍其涂覆层经人工加速试验、耐盐雾试验和耐湿热试验的结果，以及在各种气候条件下，经一年的天然暴露试验结果。
Nano-scale composite ceramic coating on Q235 was fabricated by thermochemical reaction method, and then structural analysis and performance test were conducted of the coating.
采用热化学反应法在Q235钢上制备纳米复合陶瓷涂层，对涂层进行结构分析及性能测试。
The gradient PPS/FEP composite anti-corrosive coatings were prepared on carbon steel. The bonding strength of all coating systems was determined by the pull-off test.
在碳钢表面制备了具有梯度结构的PPS/FEP复合防腐蚀涂层，采用拉开法测定了各涂层体系的结合强度。
It was revealed by push out test that the hydroxyapatite coating greatly prompt the bonding strength between implant and surrounding hard tissues.
生物力学实验结果表明，使用羟基磷灰石涂层，可以显著提高骨组织与种植体的界面结合强度。
This works study the property of composite, stick agents and dispersant, provide 11 methods of producing fireproofing coating, describe the coating's test method, and analyze the test results.
重点研究了11个较为典型涂料配方，生产工艺及施工条件，并对隧道防火涂料检测方法进行了描述，并对研制的隧道防火涂料检测结果进行了分析。
The electrochemical test in sodium chloride solution demonstrated that the coating can improve the anticorrosion capacity, especially the resistance to pitting of low carbon steel.
在氯化钠溶液中的电化学测试表明，聚苯胺膜的存在可以显著地提高低碳钢的耐腐蚀性和抗点蚀能力。
The electrochemical test in sodium chloride solution demonstrated that the coating can improve the anticorrosion capacity, especially the resistance to pitting of low carbon steel.
在氯化钠溶液中的电化学测试表明，聚苯胺膜的存在可以显著地提高低碳钢的耐腐蚀性和抗点蚀能力。
应用推荐