Coating performance is proportional to the degrees of surface preparation.
涂层的最终性能与表面处理的程度成正比。
After the analysis of the data, the data relating to coating performance has been found.
经过对这些数据的分析和研究，进而获得涂层服役性能变化的数据。
The coating performance and technology have a great effect on the surface quality of cast-pipe and t…
涂料性能与涂料使用方法强烈影响铸管表面质量和管模使用寿命。
Almost any desired coating performance parameter can be attained by proper selection of raw material building blocks.
通过适当选择原料结构单元，几乎可以得到任何期望的涂布性能参数。
Spraying processes of hydraulic pressure oil tanks are discussed in terms of coating performance, coating process and et al.
从涂层性能、涂装工艺等方面讨论了液压油缸的喷涂工艺。
Technological process and formula of the coating is presented and effects of reaction temperature on coating performance discussed.
介绍了该涂料的生产工艺和配方，讨论了反应温度对其性能的影响。
The arc spraying technology was compared with the other thermal spraying technologies in the ways of coating performance and so on.
将电弧喷涂与其他热喷涂技术在涂层性能等方面做了对比。
The effects of resin, 3D stereo apparition agent, adhesion accelerator and anti-sediment agent on coating performance were discussed.
讨论了树脂、3D立体魔幻剂、附着力促进剂、防沉剂等对涂料性能的影响。
Effects of basic coating performance of stain resistance were studied in the light of drying time, hardness and surface tension of the coatings.
从涂料干燥时间、硬度和表面张力出发，研究了这些基本性能对涂料耐沾污性的影响。
Therefore, the development of a ship coating performance evaluation and management system for anti-corrosion coating of ships is very important.
因此，针对船舶防腐涂层而开发船舶涂层服役性能评价及管理系统具有十分重要的意义。
It has exceptional durability, outstanding corrosion resistance, good resistance to staining of a variety of colors, high decorative Convenience of coating performance.
它具有超常的耐候性，突出的耐腐蚀性、良好的抗沾污性、多种颜色，高装饰性，方便的涂装性能。
It is concluded that the coating performance depends most on the current through the qualitative analysis of the effect of process parameters on the coating performance.
通过分析，得出各个工艺参数对涂层性能影响的定性结果，在可得到涂层的工艺范围内，喷涂电流对涂层性能的影响最大。
The result has been that a variety of coatings have been utilized by various pump manufacturers through the years, with mixed success and few documented case histories on coating performance.
经过几年的时间，各种各样的涂层已被不同类型的制造商所采用，取得了一些成功，但涂层性能的文献不多。
Varieties, influence of rheological agent to coating performance, performance and application of common rheological agent are covered. Development orientation of new rheological agent is introduced.
综述了流变剂的种类、流变剂对涂料性能的影响、常用流变剂的性能及应用等，介绍了新型流变剂品种的发展趋势。
No matter what the appearance looks beautiful, too thin dry film coating some of the key would adversely affect the performance, all of these properties will affect the final quality of the project.
不管外观看起来多么漂亮，干漆膜过薄会对涂料的一些关键性能造成不利的影响，而所有这些性能都会影响到工程的最终质量。
Waterborne acrylic resin is a kind of waterborne coating of excellent performance and has some merits of latex and soluble resin in addition.
水性丙烯酸树脂涂料是一种性能十分优异的水性涂料，兼有乳胶和水溶性树脂涂料的优点。
Gloss consistency - too thin coating film will damage this important performance.
光泽度的一致性-过薄的涂装漆膜会损害这个重要性能。
The process conditions of pretreatment, corrosion prevention coating, decorative coating and film's performance were studied.
研究了镁合金的前处理、防腐涂装以及装饰性涂装工艺条件及其涂膜性能。
The results show that the coating film with flat, smooth and excellent performance can be obtained under the condition of appropriate electrophoretic parameters.
结果表明，在适宜的电泳工艺参数下，可以得到外观光滑平整，综合性能优良的漆膜。
And morphology and performance of the coating has been examined.
并对镀层的表面形貌和性能进行了测定。
Performance requirements. Minimum cured film performance requirements for laboratory-applied epoxy coating system are stated in Table 2.
性能测试。实验室喷涂的最小固化膜层性能要求见表2。
Other main products are: building waterproof coating, high-performance green latex paint, green paint and other decoration.
公司其它的主要产品还有：建筑防水涂料、高性能环保乳胶漆、环保装修漆等。
We found that the coating could restrain the frost layer growth to certain extent. The coating shows a good fastness and repetitive - use performance.
研究发现，这种涂层能够在一定程度上抑制霜层的生长，并且这种涂层牢固性好，重复使用性高。
The mechanism and results for introducing anti-oxidants in powder coatings were described. The results were shown that the performance of powder coating is upgraded.
论述了抗氧剂应用于粉末涂料中的作用机理及试验结果，表明对提高粉末涂料的性能有很大促进作用。
The coating material, performance features, development process of the plug as well as its application results are presented.
介绍了该顶头的涂层材料、性能特征和研制工艺以及使用效果。
The key to the performance of anticorrosive coating was the kind of fillings and dosage.
合理地选择颜填料的种类及其含量是决定防腐蚀涂料耐腐蚀性能的关键。
The change of viscosity, structural thixotropy and foundation of rheologic model provide experimental evidence for evaluating, prognosticating and altering the technical performance of coating.
蒙脱土悬浮液体系的粘性变化、结构触变性以及流变模型的建立，为评价、预测和改变涂料工艺性能提供试验依据。
This paper introduces application technique and performance test of powder coating in experimental production for large - diameter steel plate - welded pipe.
主要介绍大直径钢板焊接钢管涂敷环氧粉末涂层实验性生产中的施工技术及涂层性能测试。
This paper introduces application technique and performance test of powder coating in experimental production for large - diameter steel plate - welded pipe.
主要介绍大直径钢板焊接钢管涂敷环氧粉末涂层实验性生产中的施工技术及涂层性能测试。
应用推荐