The coating method and reaction time were investigated.
研究了包覆方法和反应时间对包覆效果的影响。
It was decided to remove the liner and use the resin coating method.
这是决定删除班轮运输和使用的树脂涂层的方法。
Colorific design concept and color ribbon coating method was presented.
指出了客车车身色彩、色带的设计理念与涂装方法。
Add filter aid agent and methods have pre-coating method and blends method.
加助滤剂和方法有预涂法和预混法。
Conclusion The film coating method is simple and ideal, which is good for application.
结论薄膜包衣工艺方法简单、效果理想。
Dip coating: coating method in which the web is passed around a roller immersed in solution.
浸渍涂布：纸卷绕过一浸于涂面溶液的轴而加上涂层的方法。
Dip coating method was used to prepare the polyether polyurethanes coating on coronary stents.
利用浸涂方法在不锈钢冠脉支架表面制备出聚醚聚氨酯涂层。
The high quality iron cores were gained by the chemical coating method used in the experiments.
采用该实验化学包覆液可以制取高性能的纯铁磁粉芯。
A high temperature static coating method for the capillary chromatographic column was developed.
提出了用高温静态法涂渍毛细管色谱柱。
General situation of photoelastic coating method and its engineering application are introduced.
介绍光贴片法的概况及工程应用。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
WO3 precursor solution was prepared by Sol-gel method. The films were printed by dip-coating method.
采用溶胶-凝胶方法制备WO3前驱液，利用浸渍-提拉法使其成膜。
If the spin coating method is used, a UV-resin is spun on top of the metal film and cured by UV-exposure.
若使用旋涂法，就是在金属膜的上面旋涂一层UV树脂并用UV固化。
The vapor transferring coating method is a promising one, which can be used to make coatings on complex surfaces.
气相传输涂层技术不受零件尺寸和形状的限制 ，且涂层与基体之间有良好的结合力 ，是一种很有前途的涂层技术。
A double photoelastic coating method for shell stress measurement based on the principle of similarity is suggested.
本文从相似关系着手提出了一种测定薄壳应力的光弹性贴片方法。
Experimental results indicate that the quality of SEM image is closely related to the coating method and the coating thickness.
试验表明，扫描电镜图像的质量是同喷镀导电膜的方法和厚度有着密切的关系。
The coating method, coating materials, treatment of cutter before coating, the rational use of coated cutters, etc. are reviewed.
本文就涂层方法、涂层材料、涂前刀具处理以及涂层刀具合理使用等问题作了综述。
Methods The (-) -pantoprazole sodium enteric-coated pellets were prepared by centrifugal granulation and fluid-bed coating method.
方法采用离心造粒法及流化床包衣法制备左旋泮托拉唑钠肠溶微丸。
It is found that the glass surface coating method and the collosol-gelling method are feasible for the blackening of glass surface.
经过试验分析，得出了玻璃表面涂覆法和溶胶凝胶法是使玻璃表面黑化的可行途径。
The testing analysis for the frame structure strength of dual side dump mine truck were carried out by the photoelastic coating method.
采用光弹性贴片法对双面卸矿用车车架结构的强度进行了测试分析。
The research shows that Ni(NO3)2 decomposition-hydrogen reduction is a convenient and effective powder coating method for MoS2 powders.
研究表明硝酸镍分解-氢还原法对二硫化钼粉末而言是一种方便和有效的粉末包覆方法。
Coating method can achieve the improvement of materials absorbing capability, currently, which is a hotspot problem and of military value.
采用包覆技术实现对材料吸波性能的改进，是当前吸波材料研究的热点问题，具有重要的军事应用价值。
The PMMA doped azo-dye compound films were prepared by the spin coating method. Their thickness and UV-Vis absorption spectra were measured.
把主体材料聚甲基丙烯酸甲酯（PMMA）和客体偶氮化合物，用溶胶-凝胶法制成溶胶，旋涂成膜，测量了其紫外-可见吸收光谱和厚度。
There is a close relationship between the magnetic characteristics of iron cores and the coating method of powder and the technical parameters.
粉末的包覆方式和工艺参数同铁粉芯的磁性能有着密切的联系。
The powder coating method by the fluid-bed and effect of the technological reference Numbers on the coating properties are emphatically introduced.
主要研究了尼龙粉末流化床涂覆工艺参数对涂层性能的影响。
Compared with traditional coating, this coating method will not result in phenomena like over-coating or coating rebound, so paint loss is cut down.
与传统式空气喷涂方法相比，级减少喷涂过量及反弹现象，从而减少涂料损失。
This article compares dry spreading technique with coating method of CCCW applied in prefabrication pipe sections, which are used in shield construction.
对比介绍了水泥基渗透结晶型防水材料(CCCW)在地铁盾构法施工预制管片生产中的干撒法和涂刷法两种施工工艺。
By using vacuum coating method, we prepared a new type of goggles which is very fitted to be used in the high temperature smelting and welding environment.
采用真空镀膜的方法，制备出高温冶炼、焊接等使用的护目镜。
As compared with traditional packaging method, the coating method with phosphors away from the LED chip can improve the luminous efficiency by more than 5%.
与传统封装方法相比，采用荧光粉远离芯片的封装方法可使发光效率提高5%左右。
The glass surface is blackened by use of ion exchange hydrogen reduction method, doping coloration ion method, surface coating method and collosol-gelling method.
对该玻璃表面黑化，采用了离子交换氢还原法、玻璃中掺杂着色离子法、表面涂覆法以及溶胶凝胶法。
应用推荐