For more information about the coating area, please call us or email to us.
如需更多关于镀膜方面的信息，请电话联系我们或发邮件给我们。
Circuit board exactly averting connector, etc no coating area, able to realize selective spraying technics.
准确实现各种电路板避开连接器等非涂覆区域的选择性喷涂工艺。
Ultrafiltration Which is used in chemical recovery, is a new technology being used in the paper coating area.
用于化学品再生的超滤，是一项用于纸张涂布领域的新技术。
DMRC coating: coating area is using the latest coating technology developed for digital SLR, it improved a lot based on the characteristics of digital SLR cameras.
DMRC涂料：涂料领域是使用最新的涂层技术开发的数码单反相机，它改善了很多基于特征的数码单反相机。
When the metal coating is punctured or scratched, the capsules in the damaged area burst and ooze restorative liquids, in the form of compounds called trivalent chromates.
当金属的覆盖层受到扎刺或划损时，受损区域的胶囊将会破裂并渗出具有恢复性的液体- - -三价铬钝化化合物。
All our shower trays are anti slip as we believe safety is Paramount and we can install trays with an antibacterial coating ensuring a fully hygienic shower area.
我们所有的淋浴盆是防滑，因为我们认为安全是最重要的，我们可以安装一个抗菌确保充分的卫生淋浴区涂层盘。
Measuring paint area of work to statistic of the quantitative coating.
测量粉刷工作的区域以定量所需的涂料的数量。
If the DFT is reduced to less than specified, the area shall be abraded as described above and an additional layer of coating shall be applied until sufficient thickness is achieved.
如果干膜厚度缩减到低于指定时，该区域按照之前描述的进行研磨，并应再涂敷额外的一层保护层直到达到足够厚度。
The corrosion spot emergence marks the beginning of the part failure of the coating, and the corrosion spot increase and growth present the failure area enlargement.
蚀点的出现标志着涂层局部失效的开始。蚀点增加并长大，则对应着涂层失效面积的扩展。
Any area of the coating found to be off-ratio or uncured shall be repaired by removal of all defective coating, and re-prepared and re-coated in accordance with the specification described herein.
涂层上任何区域发现未固化时都应靠去除所有带瑕疵的涂层的方式来修补，并应根据本规范的规定来进行再处理及再涂敷。
Current density: unit under the plating area under current, usually the higher current density film thickness is thicker, but is high coating will scorched thick dry.
电流密度：单位电镀面积下所承受的电流，通常电流密度越高膜厚越厚，但是过高时镀层会烧焦粗燥。
Corrosion under a scribe line or an area of damaged coating or edge, after salt spray testing or other testing.
在盐雾试验或其它试验后沿着划线涂层边缘的腐蚀。
In this process, the painting will be finishing equipment to the entire surface area, through the use of a single coating plate may matte and high gloss effect.
在此过程中，涂装装置会将涂装应用于整个表面区域，透过使用单一的涂装板即可达成无光泽与高光泽的效果。
This method is charecterised by its good optical property. simple equipment, low cost of raw material and would be in practical use for large area antireflection coating preparation.
用该法制备的减反射膜光学性能优良，生产设备简单，原料价格便宜，适宜在平板和真空管集热器玻璃表面上大面积涂覆减反射膜。
Wet install the external doubler and the filler with NAS1097AD6 rivets and PR1422 sealant, and restore the reworked area coating.
用NAS1097AD6铆钉和PR1422密封胶湿安装外加强板和填片，并恢复修理区域漆层。
Operating current density is too low, leading to low current area, coating can't exhalation.
操作电流密度太低，导致低电流区，镀层无法析出。
The area that need repaired must be blast cleaning and remove the defect. The repairing surface must be neat, smooth to keep the coating accord with original coating.
待修复的区域必须进行清理，除去缺陷。修复面必须平整、光滑、以保证涂层和原涂层一样。
The first coating defines a second open area which is smaller than the first open area.
所述第一涂层限定小于所述第一开 口区域的第二开口区域。
Organosilicon can also be used as a modifier of polyurethane, be applied in the area such as coatings, adhesives, sealants, the coating agents, textile treatment agents, etc.
有机硅化合物还用作聚氨酯的改性剂，用于涂料、胶粘剂、密封剂、涂饰剂、织物整理剂等领域。
The abraded area must extend at least 25 millimetres (1 ") beyond the area to receive the coating."
研磨区域应扩展到要涂敷的区域之外至少25毫米(1英寸)。
If an area of paper is covered with a transparent marker coating, the resultant color will be a blend of the paper color and the marker color.
如果一纸面积涂层具有透明标记覆盖，由此产生的颜色将是一个混合的色纸的颜色和标记。
The microstructure change in the interfacial area is related to the inter-diffusion of elements between the coating and the substrate.
界面区微观结构的变化与元素在涂层和基体间的相互扩散行为密切相关。
Chamber or enclosed area for the purpose of curing by heat or energy the coating.
用于加热或能量使涂层固化目的的房间或有限区域。
The microstructure, phase structure and composition of the area near the coating interface were analyzed. The microhardness and corrosion resistance of the coating were also tested.
分析了涂覆界面附近区域的显微组织形貌、相结构及化学成分，并对显微硬度和耐蚀性进行了测试。
Proved by system running, the system works well. Fieldbus system for the Production of coating paper is a successful example of Fieldbus system application in papermaking process area.
现场总线高档涂布白板纸生产监控系统，是把现场总线系统成功地应用于造纸机械控制领域的典型案例。
The appearance, mechanical property and stealth property of the coating had unobvious variation after 24 months of exposure and remained in allowed area.
通过24个月的考核，得到了该涂层外观、力学性能及隐身性能变化不大，仍保持在技术指标范围内的试验结果。
The uniformity, defects and demands on coating equipments for large area continuous coating are analysed.
讨论了大面积连续镀膜的均匀性、缺陷以及对镀膜设备的要求；
Since it is used in different environment and with the discrepancy of product quality, the RTV coating used in different area has the problem of ageing and tenure of use.
由于使用环境和产品质量的差异，不同地区使用的RTV涂料都存在着老化和使用年限的问题。
Since it is used in different environment and with the discrepancy of product quality, the RTV coating used in different area has the problem of ageing and tenure of use.
由于使用环境和产品质量的差异，不同地区使用的RTV涂料都存在着老化和使用年限的问题。
应用推荐