The analysis of traditional paint paint traditional is a typical representative of the liquid coating, building industry is widely used, and dominate the world in the paint industry has in.
解析传统油漆传统的油漆是液体涂料的一种典型的代表，建筑工业领域被广泛使用，并且在曾经的涂料行业里独霸天下。
The economic analysis has shown that painting the cases of microcomputer with home-made texture powder coating is economically significant.
经济分析结果表明，微型计算机机壳涂装的国产化具有很大的经济意义。
This paper conducts an analysis the causes of breaking on concrete course Coating on asphalt pavement and proposes the specific resolves.
针对沥青路面上加铺水泥混凝土路面断板原因进行了分析，提出了具体解决的办法。
Analysis is made of relation between composition and Characteristics of elastomeric latex coating for exterior wall.
本文分析了弹性外墙乳胶涂料组成与特性关系。
Analysis the characteristic and nature of the nano particle, we discussed a scheme of how to coating the nano material to the fabrics.
对纳米粒子进行特性与表征分析，探讨如何将纳米粒子整理到织物及服装产品上的方案。
The temperature distribution and stress distribution of blast furnace tuyere with gradient coating have been studied using finite element analysis software, comparing with uniform coating.
采用有限元分析软件研究了梯度涂层高炉风口的温度分布和应力分布，并与均匀涂层进行了比较。
The study on the coating material has been made on basic material selection, additive and solution analysis, performance test and field application.
从这种防腐涂料的基料选择、颜填料及溶剂分析、性能试验及现场应用等几个方面进行了研究。
By making a physical analysis of three samples, the coating structures: internal hole, external hole and chap structures have been revealed.
并通过对三个纸样的分析，揭示了喷墨打印照片纸的三种典型涂层结构：内孔隙结构、外孔隙结构、龟裂结构。
An analysis of coating drive techniques and the demand of drive system for coating machine are discussed in detail. The design of drive system is also studied.
分析了涂布机的传动工艺过程及涂布机对传动系统的要求，介绍了涂布机传动系统的设计过程。
An analysis of coating drive techniques and the demand of drive system for coating machine are discussed in detail.
分析了涂布机的传动工艺过程及涂布机对传动系统的要求，介绍了涂布机传动系统的设计过程。
The coating composition, microstructure and phases were investigated by energy dispersive X ray analysis (EDXA), X ray diffraction(XRD), scanning electron microscope(SEM)and image analyzer.
运用能谱技术（EDXA）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）和图像分析仪对涂层成分、显微组织、涂层相结构和组成进行了分析。
Nano-scale composite ceramic coating on Q235 was fabricated by thermochemical reaction method, and then structural analysis and performance test were conducted of the coating.
采用热化学反应法在Q235钢上制备纳米复合陶瓷涂层，对涂层进行结构分析及性能测试。
The analysis ways of coating are also briefly introduced.
并简述了涂层的分析方法。
It is determined through experimental analysis that the resistance of an optical fiber is taken interim as standard of air sealed carbon coating optical fiber for 2 % -strain screening.
通过实验分析确立了把光纤电阻作为衡量气密性碳涂覆光纤通过2%应变筛选的过渡标准。
This model can be used as an analysis tool of many important parameters in the coating process, thereby control the disc quality...
借助模型分析旋涂工艺中的许多重要参数，从而控制盘片质量，并最终实现闭环生产控制。
This paper introduces the analysis method of silver-antimony alloy coating and antimony content.
介绍了银-锑合金镀层和镀液中锑含量的分析方法。
Therefore, on the basis of theory and practice, Preparation and microscopic analysis of metallic coating samples are described in this paper.
对此，本文根据理论和实践，阐述了金属镀层金相试样的制备方法和显微分析技术。
The influence of arc spraying parameters on the adhesive strength and wear-resistance of JCW-B coating was studied by orthogonal design test and extreme analysis.
采用正交设计方法和通过极差分析研究了电弧喷涂工艺参数对J CW - b涂层结合强度和耐磨性的影响。
After the analysis of the data, the data relating to coating performance has been found.
经过对这些数据的分析和研究，进而获得涂层服役性能变化的数据。
The gouge resistance of three kinds of pipeline external coating was evaluated by using gouge test and data analysis of reliability.
通过划伤试验和测试数据的可靠度分析，研究了三种管道外防护层的抗划伤性能。
And further research is conducted on the methods of qualitative and quantitative analysis of PU and the textile fibres commonly used for coating substrates.
并利用化学分析方法，研究其涂层以及基布的溶解性能，进而研究聚氨酯类涂层与常见纺织纤维基布的定性分析和定量分析方法。
The results of the microstructure analysis showed that the coating thin film possess the perfect compact structure.
通过微结构分析，结果表明覆盖薄膜具有优异的致密性；
Through the numerical analysis, it is posed that the structure surface stress gradient and the coating thickness are the principal factor that influence thickness effect.
通过数值分析提出，构件表面应力梯度和贴片厚度是影响厚度效应的主要因素。
Abstract: Abstract: Objective To evaluate the effect of magnesium-substituted hydroxyapatite coating on peri-implant osseointegration using fluorescent microscope analysis.
摘要[摘要]目的用荧光显微镜分析掺镁羟基磷灰石涂层对种植体骨结合的影响。
Based on analysis and test, the silicone matrix resins modified by epoxy and borate etc was selected, which were confected an aero-dynamic heat-resist coating.
通过配方设计，确定以环氧改性有机硅树脂为基体，以硼酸盐等为体质填料，按一定配比配制一种新型气动热防护涂料。
The main factors that affect the quality of organize coating for heat exchanger were analyzed through statistic data by causal analysis.
通过因果分析方法，作出影响冷换设备有机涂层质量的排列统计图，从而分析出主要的影响因素。
With the progress of technology, several surface analysis techniques are applied in studying coating layer structure.
随着技术的不断进步，一些表面分析技术逐渐地被应用于涂层结构的分析中。
It is concluded that the coating performance depends most on the current through the qualitative analysis of the effect of process parameters on the coating performance.
通过分析，得出各个工艺参数对涂层性能影响的定性结果，在可得到涂层的工艺范围内，喷涂电流对涂层性能的影响最大。
Given the complexity between the ingredient of the coating and the coating essential properties, the neural network model is proposed to be used in the analysis of experimental data.
针对涂料的组成百分比与涂料基本性质之间的复杂关系，提出利用人工神经网络对试验数据进行处理，建立试验因素与结果之间的神经网络模型。
Given the complexity between the ingredient of the coating and the coating essential properties, the neural network model is proposed to be used in the analysis of experimental data.
针对涂料的组成百分比与涂料基本性质之间的复杂关系，提出利用人工神经网络对试验数据进行处理，建立试验因素与结果之间的神经网络模型。
应用推荐