This paper presents a theory of the cutter radius offset for the CNC system based on the real analysis.
本文基于实分析，为CNC系统提出了一种刀具半径补偿的理论。
Finally, a new approach for cutter path calculation using binary-search technique is presented, which will simplify the CNC programming problems to a great extent.
最后提出一种采用对分试算法计算刀具轨迹的新方法，可简化数控编程计算问题。
Cutter attrition and breakage is one of the familiar faults of CNC machine tool, and the degree of cutter attrition and breakage directly influences the quality of the production.
数控切削加工过程中刀具的磨损与破损是数控机床常见的故障之一，而刀具的磨损与破损程度直接影响零件的加工质量。
Foam cutter advanced CNC cutting software technology can support nc cutter do full-time cutting, automatic cutting and efficient cutting!
泡沫切割机先进的数控切割软件技术可以支持数控切割机做到全时切割、自动切割和高效切割！
A practical method to realize C-function cutter radius compensation was presented. The method is simple and practical, and can be applied in two-axis CNC system and CNC simulation system.
提出了一种实用的C功能刀补实现方法，该方法简单实用，可方便地用于两轴cnc系统和数控仿真系统。
This paper analyses the principles of presetting cutter in CNC machining, and puts several routine methods of presetting cutter, and use typical examples to illustrate these.
分析了数控加工的对刀原理，讨论了常用的几种对刀方法，并用典型实例加以说明。
The CNC system has operation modes such as manual, automatic & programming etc. , and is used for retrofitting the CNC system of the YK7432 shaving cutter grinding machine.
系统具有手动、自动编程等工作方式，适用于YK7432剃齿刀磨齿机的数控改造。
The mold department has the CNC lathe, the bed, the drilling machine, the milling machine, the computer gong, the spark machine, the line cutter and so on.
模具部有CNC车床、礳床、钻床、铣床、电脑锣、火花机、线切割机等各类机台。
A new lower pressure water jet cutter is developed, which using the technology of premixed abrasive jet and CNC.
利用前混合磨料射流技术和数控技术，研制出了新型的低压水刀。
Study on the characteristics of cutter radius compensation in CNC milling machines and its application;
阐述数控铣削加工过程中刀具半径补偿的意义和过程。
According to the peculiarities, a CNC disk-cutter-milling method which is composed of five motion axes with four simultaneously interpolated ones is researched.
针对这些特点，提出了五轴控制、四轴联动的数控片铣刀铣削加工方法。
Before machining, the tool detection should be fixed on the smooth surface of the machine's worktable, and enter the manual mode of CNC, make the cutter be closed to the tool detection.
对刀仪在加工前应固定于光滑的机床工作台面上，然后进入CNC的手动方式，使刀具接近对刀仪。
An efficient and accurate interpolation algorithms for two curves was proposed which can drive the cutter of a CNC machine along three-dimensional (3d) trajectories.
本文提出这两种方程的高效准确的插补算法，实现了数控机床的空间三维曲线轨迹插补。
An efficient and accurate interpolation algorithms for two curves was proposed which can drive the cutter of a CNC machine along three-dimensional (3d) trajectories.
本文提出这两种方程的高效准确的插补算法，实现了数控机床的空间三维曲线轨迹插补。
应用推荐