This paper concentrates on using gated-clock in low-power design of CMOS circuits.
阐述了如何运用门控时钟来进行CMOS电路的低功耗设计。
The principle of a new electronic control device with CMOS circuits on hard rapier loom is introduced.
本文介绍一种刚性剑杆织机CMOS电路控制装置的原理。
The synthesis technique for multivalued CMOS circuits based on transmission function theory is discussed.
本文讨论了基于传输函数理论的多值CMOS电路综合技术。
Testing based on stuck-at fault model is insufficient for high performance ICs, especially for CMOS circuits.
基于固定型故障模型的测试方法已不能满足高性能集成电路，尤其是对CMOS电路的测试要求。
Guided by the switch signal-theory, how to realize the threshold controlling in current-mode CMOS circuits is studied.
以开关信号理论为指导，对电流型CMOS电路中如何实现阈值控制进行了研究。
Based on this theory, the current-mode CMOS circuits realizing ternary addition and ternary multiplication operations are designed.
基于该理论，本文设计了实现三值加法和三值乘法的电流型CMOS电路。
Monolithic integration technique for optical waveguides and photodetectors with CMOS circuits on silicon is presented in this paper.
文章介绍了硅基光波导、光探测器和CMOS电路的单片集成技术。
CMOS compatible integrated humidity sensor is designed and fabricated. The humidity sensor and CMOS circuits are fabricated at the same chip.
设计并制备了一个CMOS工艺兼容的集成湿度传感器，将湿度传感器与CMOS测量电路集成在同一芯片上。
Since current threshold values are easy to control, this paper studies how to realize the threshold controlling in current-mode CMOS circuits.
利用电流信号的阈值易于控制这一特点，对电流型CMOS电路中如何实现阈值控制进行了研究。
Compared with bulk micromachining, the surface micromachining has the advantages of low manufacturing cost and easy integration with CMOS circuits.
在加工工艺方面，与体微机械加工相比表面微机械加工具有工艺简单，容易与CMOS电路集成等优点。
This paper discusses the adiabatic switching principle in view of changing the mode of energy transmission in CMOS circuits and analyzes how to realize energy recovery.
本文从改变能量传输方式的观点出发讨论了CMOS电路中的绝热开关原理，并对如何实现能量恢复进行了分析。
The symmetric ternary current-mode CMOS circuits designed by using this theory not only have simpler circuit structures and correct logic functions, but also can process two-way signal.
应用该理论设计的对称三值电流型CMOS电路不仅具有简单的电路结构和正确的逻辑功能，而且能处理具有双向特性的信号。
It is also indicated, based on analysis, that the latch-up may be avoided if CMOS circuits work in safe section, and it can be realized by taking all kinds of measures, such as adjusting the layout...
通过分析表明，只要让CMOS电路工作在安全区，闩锁效应是可以避免的，这可以通过版图设计规则和工艺技术，或者两者相结合的各种措施来实现。
Through theoretical analysis, experiments and comparison with traditional CMOS gates, it is considered that either of the two practical circuits for ULG.
通过对电路的理论分析和实验测试，并与传统的CMOS与非门比较，认为该两种ULG。
It has been demonstrated that compared to simulator-based method, manufacturable deep sub-micron CMOS analog circuits can be synthesized using this system in a short run time.
大量的实验结果表明：与基于模拟器的方法相比，采用该系统可以快速综合出可制造的深亚微米cmos模拟单元电路。
This paper presents two CMOS practical circuits for the optimal Universal-Logic-Gate (ULG. 2).
本文提出了最佳通用逻辑门ulg。2的两种CMOS实用电路。
By analyzing the design idea of binary CMOS Schmitt circuits firstly, this paper indicates that the key of the design of Schmitt circuits is threshold controlling circuits.
首先对二值CMOS施密特电路的设计思想进行了分析，指出设计施密特电路的关键为阈值控制电路。
Synthesis tools for several cell level CMOS analog circuits implemented with the above approach have been integrated in FDAADS—FuDan Analog Circuit Automated Design System.
利用上述方法实现的一些CMOS单元电路的自动综合模块已经集成到FDAADS——“复旦模拟电路自动化设计系统”中。
The digital pulse width modulator adopts CMOS technology and is suitable for a variety of speech synthesis integrated circuits.
本文所设计的数字脉冲宽度调制器采用CMOS工艺，适合于不同的语音合成集成电路。
Based on analysis of the principle of substrate current of MOSFETs, a new hot carriers resistant structure of CMOS digital circuits is proposed.
本文在分析MOSFET衬底电流原理的基础上，提出了一种新型抗热载流子退化效应的CMOS数字电路结构。
On the basis of the multiple-valued switch-level algebra, this paper proposes a logic design automation algorithm for NMOS and CMOS combinational circuits.
本文在多值开关级代数理论的基础上，提出了适合于NMOS及CMOS组合电路的逻辑设计自动化算法。
The concrete circuits are composed of latches, selectors and frequency dividers. They are implemented with CMOS logic and source coupled logic (SCL).
具体电路由锁存器、选择器及分频器组成，以CM O S逻辑和源极耦合逻辑(SCL)实现。
The others are basic CMOS cell circuits.
其余为常见的CMOS单元电路。
How to use the CMOS buffer to make up the capacitance charge-discharge type long time delay circuits is studied.
对采用CMOS缓冲器组成电容充放电式长时间延时电路进行了研究。
Circuits of CMOS-process-compatible monolithic photoreceivers are designed. The circuits include photodetector, pre-amplifier and main amplifier.
设计了与CMOS工艺兼容的光电单片接收机电路，其中包括光电探测器、前置放大器和主放大器。
In conventional CMOS charge pump circuits, the pumping high voltage is limited by MOS threshold voltage, so that it can not use less cascade stages to pull up a high voltage which we want to generate.
在传统的CMOS电荷泵电路中，电荷泵输出的电压受MOS管的阈值电压限制，所以当要求电荷泵的输出电压较高时，则不得不连很多阶来达到要求。
SCFL circuits are used because of the higher speed compared to static CMOS.
电路采用源极耦合场效应管逻辑（SCFL），与静态CMOS逻辑相比具有更高的速度。
To fabricate the ESD protection circuits without adding extra steps or masks into the CMOS process.
另外，在一些前人设计的ESD防护电路中，尤其是在。
In the paper authors present a new approach of speeding up power estimation of CMOS sequential circuits by circuit simplication.
文章提出了一种采用电路化简加速功耗估计的方法。
In the paper authors present a new approach of speeding up power estimation of CMOS sequential circuits by circuit simplication.
文章提出了一种采用电路化简加速功耗估计的方法。
应用推荐