In his new paper, Dokuchaev has looked at stable circular orbits as well as spherical, non-equatorial orbits for photons at the inner boundary.
在Dokuchaev的这篇新论文里，他既考虑了光子在内边界的稳定圆轨道，也考虑了球形非赤道面轨道。
A simple way is used to approximate the curvilinear metal boundary of circular groove guide.
用一种简单方法来近似圆形槽波导的曲线金属边界。
Influence of chord length and boundary conditions on the axial capacity of circular tubular TT-joints.
弦管长度和边界条件对TT型圆管节点轴向承载力的影响。
This paper presents a systematical investigation of the nonlinear bending of polar orthotropic circular plates under arbitrarily axisymmetric loads and a variety of boundary conditions.
本文对极正交各向异性圆板在任意轴对称载荷和边界条件下的非线性弯曲问题进行了较为系统的研究。
The paper presents an analysis of the axisymmetric bending of a functionally graded circular plate under elastically supported boundary condition.
对周边为弹性支承边界条件下的功能梯度材料圆板轴对称弯曲问题进行了分析。
The nonlinear dynamic equation of a circular plate for various boundary conditions is derived, with the geometric nonlinear effects taken into account.
计及几何非线性，在各种板边条件下，建立了圆板受迫振动时的非线性动力学方程。
The nonlinear dynamic equation of free vibration to a circular plate for various boundary conditions, with the geometric nonlinear effects taken into account.
计及几何非线性，在各种板边条件下，建立圆板自由振动的非线性动力学方程。
Based on a series of simultaneous electromagnetic field equations contented with the boundary conditions, the characteristic equation of the circular groove guide loaded with dielectric is derived.
根据满足边界条件的一系列电磁场方程，推导出填充电介质的圆形槽波导的特征方程。
The system adopts the staircase approach the boundary of irregular object and it can generate circular object automatically.
对于不规则物体，系统采用阶梯近似方法对其边界进行拟合并可自动生成圆柱类物体。
The driving system of the speaker is constructed by a circular PZT bimorph, which is clamped on its boundary, An elastical coupling element is utilized between the bimorph and the speaker cone.
扬声器的驱动元件是边缘固定的圆形PZT 双型弯曲振子，振动——辐射元件是圆锥形纸盆，这两部分之间采用弹性耦合。
The tumour shape, superficial and the boundary tumour shape is diverse, generally is the anomalous shape, also obvious circular, egg circular and so on.
肿块形态、表面及边界肿块形状多样，一般为不规则形，亦可见圆形、卵圆形等。
By introducing the boundary conditions of the circular plate, the flexure displacement, radial rotation Angle, radial bending moment and radial shear force on each nodal line of the plate were given.
引入圆板的边界条件，给出了该板每条节线上的挠度、径向转角、径向弯矩和径向剪力。
The diffraction phenomena by a circular aperture or a phase plate is analyzed by the boundary diffraction wave theory, the analytic expression of its axial intensity is obtained.
本文根据边界波衍射理论分析了圆孔及相位片的衍射现象，得出其轴上光强的解析表达式，并对高斯光束经相位片衍射后的轴上光强进行了数值计算和讨论。
The solution of large deflection problem of thin orthotropic circular plates with variable thickness under uniform pressure under simply supported boundary condition is obtained in this paper.
本文给出了正交各向异性变厚度周边简支圆薄板在均布载荷下大挠度问题的解。
The hydrogen bubble flow visualization technique was used to study the effects of small semi-sphere on the boundary layer transition of flow over a smooth circular plate.
应用氢气泡流动显示技术对圆盘上小半球对边界层转捩的影响进行了观测。
An experimental study of inlaid circular ring under impact force on interior boundary is also conducted. The result shows that the stress is distributed within a limited scope.
对内边界受冲击力作用的镶嵌圆环也进行了实验研究，结果表明，应力分布局限在有限范围内。
The present paper deals with the material parameter identification of orthotropic plate with a circular hole by the approach of integrating optimization and boundary element analysis.
结合优化技术和边界元分析，针对正交各向异性孔板进行了材料参数的识别。
To begin with, in this paper, the displacement governing equations and the boundary conditions of nousymmetrical large deflection problem of circular thin plates are derived.
本文首先导出圆薄板非轴对称大变形问题的位移基本方程及边界条件。
An experimental study of inlaid circular ring under impact force on interior boundary is also conducted. The result shows that the stress is distributed in a limited scope.
文中还对内边界受冲击力作用的镶嵌圆环进行了动光弹实验，结果表明，应力分布局限在有限范围内。
Then the dual integral equations of the venical vibration of a rigid circular plate on a fluid-saturated poroelastic half space are established according to the mixed boundary permeability condit.
用积分变换和积分方程研究多孔饱和半空间上刚性圆板的垂直振动问题。
A finite element artificial transmitting boundary method is presented for electromagnetic wave scattering from a perfectly conducting circular cylinder and a number of concave objects.
采用有限元-人工透射边界法求出平面波在无限长圆柱上的散射近场，并与解析解进行比较，进而对几种凹面体电磁波散射近场求解。
The basic principles of the method are described, and some numerical examples of the radial cracks appearing at the boundary of twin, three and four circular holes are calculated.
文中阐明了这种复变应力函数迭加解法的基本原理，并用此方法计算了双孔、三孔和四孔边裂纹板的若干数值例子。
This paper deals with theoretical and numerical analyses of scattering of elastic wave and dynamic stress concentrations in an infinite thin plate with a circular hole using boundary element method.
本文采用边界元法对开孔无限大薄板弹性波的散射与动应力集中问题进行理论分析和数值计算。
Flow field of a circular cylinder oscillating in a uniform flow or in a wake was investigated using currently modified virtual boundary method.
用虚拟体方法研究了均匀流及尾流中圆柱横向振荡的流动特征。
Boundary value problem of a plate with crack and defect such as circular hole is a multi-connected domain problem.
带有裂纹和缺陷孔洞的板的问题是一个多连域的边值问题，这类问题适合用边界元法所具有的高精度特性来求解。
Considering the mixed boundary-value conditions, the dual integral equations of torsional vibrations of a rigid circular plate resting on transversely isotropic saturated soil were established.
考虑到混合边界值条件下，对偶积分方程的刚性扭转振动建立了横观各向同性饱和地基上圆板的休息。
Considering the mixed boundary-value conditions, the dual integral equations of torsional vibrations of a rigid circular plate resting on transversely isotropic saturated soil were established.
考虑到混合边界值条件下，对偶积分方程的刚性扭转振动建立了横观各向同性饱和地基上圆板的休息。
应用推荐