Full-Bridge converter is the main circuit topology of the inverter.
论文选取全桥变换器作为主电路拓扑。
It is featured by simple circuit topology and ordinary PWM control way.
该逆变器具有电路结构简单和采用普通的PWM控制方式的特点。
Full-Bridge converter is selected as the main circuit topology in this paper.
论文选取全桥变换器作为主电路拓扑。
The experimental results show that the circuit topology of the novel ASI is reasonable.
试验结果表明，这种新颖的航空静止变流器电路拓扑是合理的。
The operation and design approach of this circuit topology is carefully analyzed and studied.
详细分析和研究了这种电路拓扑的原理和设计。
This paper proposed two identification methods of circuit topology for power electronic circuits.
针对电力电子主电路拓扑辨识这一目标，提出了两种辨识方法。
The circuit topology and fundamentals of self-excited controllable saturated reactors are briefly introduced.
简要介绍自励式可控饱和电抗器的电路、结构和特性。
In general the circuit topology of multi-tuned filter consists of one series branch and multi-parallel branches.
多调谐滤波器在电路拓扑结构上通常由一个串联支路和多个并联支路组成。
When impulse response with a specific circuit topology is studied, the duality impact arises in dynamic equation.
在研究具有特定拓扑结构电路的冲击响应时，其动态方程中会出现对偶冲击函数。
For example, with high power adaptor for notebook computer, a paralleled type of circuit topology is presented and studied.
以大功率笔记本电脑适配器为例，提出并研究了一种并联式电路拓扑结构。
The experiment results show that the SMPS circuit has simple circuit topology, reliable working performance and stable output.
试验结果表明，该电源结构简单，运行可靠，输出稳定。
The conditions are determined from the circuit topology and the circuit-theoretic properties for both tree and cotree resistors.
条件决定于电路的拓扑结构和电阻器的电路理论性质。
Push-pull circuit topology is used for the main circuit, together with simple drive and dual-direction reset of transformer flux.
主电路采用推挽电路拓扑，驱动简单，变压器磁通可以双向复位；
From the main circuit topology and control, analysis of the switching power supply, PFC circuit, soft-switching PWM circuit works.
从主电路的拓扑结构和控制方式，分析了开关电源、PF C电路、软开关pwm电路的工作原理。
By employing the circuit topology of full-bridge inverter, the IGBT and the amorphous transformer, the power circuit could be built.
在功率电路拓扑的设计上，采用全桥逆变结构，并使用IGBT和非晶态变压器作为主要器件。
This paper describes a module design for use with a digital load cell along with the relevant circuit topology and the filtering algorithm.
介绍了一种用于将称重信号数字化的模块设计，并对电路原理和滤波算法进行了详细说明。
The experimental results show the feasibility of the circuit topology, and the correctness of theoretical analysis and the parameters design.
实验结果证明了电路拓扑的可行性、理论分析的正确性以及参数设计的合理性。
The power factor correction (PFC) and half-bridge inverter circuit topology are commonly used in modern high power factor electronic ballasts.
现代高功率因数电子镇流器结构中普遍采用功率因数校正（PFC）和半桥逆变谐振电路拓扑。
A circuit topology of a combined compensation system for power factor correction, harmonic mitigation and harmonic resonance damping is proposed.
提出了一种具有功率因数校正、滤除谐波电流和抑制谐波谐振的电力系统综合补偿系统电路结构并将其成功应用于实际工程。
The control scheme can simplify the control system design without the modification of the main circuit topology, so it has the theoretical and practical value.
在不改变主电路拓扑结构的情况下，可大大的简化系统控制，具有理论和工程应用价值。
The power circuit topology of primary equipments of an operating industrial power system is shown with main technical parameters and technical characteristics.
针对某实际运行的基于感应滤波的工业定制电力系统，给出了一次设备的主电路拓扑以及所采用的主要技术参数和技术特性。
This module uses a circuit topology of forward pulse width modulated - zero current quasi - resonance soft - switching , combined with active clamp technology.
该变换器电路结构上采用正激一零电流准谐振软开关电路拓扑结构，并结合了有源钳位技术；
On the basis of introducing the main circuit topology, the control sequence and mode transition of the circuit were analyzed and validated by means of simulation.
在介绍主电路拓扑基础上，分析了电路的控制时序及工作模式转换，并通过仿真验证了控制时序的正确性和电路的软开关性能。
A circuit topology family of inverters with high frequency pulse AC link and a double polarities phase-shifting control strategy are proposed and deeply investigated.
提出并深入研究了高频脉冲交流环节逆变器电路拓扑族及其双极性移相控制策略。
In consideration of safety performance, power rating and applications of the recharger, the isolated half-bridge converter circuit is adopted in the main circuit topology.
基于充电机安全性能，功率等级以及应用场合的考虑，主电路拓扑选用的是带隔离的半桥逆变电路。
To briefly introduce the operating mechanism for the soft switch of the active clamping and forward and flyback combination of ZVS-PWM with the single-end circuit topology.
在有源箝位正激电路中，为了使主开关管和辅助开关管能较容易地实现零电压开通条件，提出了一种改进型有源箝位正激拓扑方案。
A circuit topology family of inverters with high frequency pulse AC link and a double polarities phase shifting control strategy are proposed and deeply investigated in this paper.
提出并深入研究了高频脉冲交流环节逆变器电路拓扑族及其双极性移相控制策略。
This paper introduces the circuit topology of portable inverter arc welder with soft snubber, mainly power circuit is a double switch forward converter with assistant resonant circuit.
主电路采用具有无源辅助谐振网络的双管正激变换器，与普通双管正激变换器相比，功率管开关状态得到较好的改善，同时并没有增加电路的复杂性。
A detailed analysis is made about the series resonant DC DC converter on such matters as the composition principle of the main circuit, the circuit topology and existing state sequence.
对串联共振型DC DC变换器主电路的构成原理，电路拓扑和存在的工作模式进行了详细的分析讨论。
A detailed analysis is made about the series resonant DC DC converter on such matters as the composition principle of the main circuit, the circuit topology and existing state sequence.
对串联共振型DC DC变换器主电路的构成原理，电路拓扑和存在的工作模式进行了详细的分析讨论。
应用推荐