In this thesis, we use circuit optimization technique to replace the network synthesis theory and design high performance diplexers on the basis of LC network.
本文以LC网络为例，提出了利用电路优化技术代替网络综合方法，设计高性能的双工器。
Two aspects of researches is discussed in the thesis, IC simulation waveform comparison automation and analog circuit optimization automation under process variation.
本文对芯片仿真波形的自动比较和工艺偏差下模拟电路的自动优化两方面进行了研究。
The energy optimization methods in circuit level and gate level have been investigated widely.
线路层、门层等低层能量优化方法已经得到广泛研究。
The main research area is the structure optimization of floating-point adder, which is intent to minimize the delay of floating-point addition and optimize the circuit structure.
主要研究方向是优化浮点加法器结构，减小浮点加法运算的延迟，优化电路结构。
The main research area is the structure optimization of floating-point adder , which is intent to minimize the delay of floating-point addition and optimize the circuit structure.
主要研究方向是优化浮点加法器结构，减小浮点加法运算的延迟，优化电路结构。
Optimization of the circuit configuration was performed by means of iterative SPICE analysis.
电路最佳参数的选择是借助于反复使用SPICE分析程序来完成的。
The study results can offer and guide the choice and optimization of various kinds of circuit topologies.
比较研究的结果能为各种电路拓扑的选择和优化提供借鉴指导。
Performance evaluation and optimization engine are two important modules in the analog integrated circuit automation synthesis.
性能评估器和优化模块是模拟集成电路自动综合中两个重要的模块。
As the theoretic foundation of low power, power optimization from design levels of digital circuit has been discussed with emphasis based on the basic power consumption equation.
作为低功耗设计的理论基础，本文从数字电路的基本功耗方程出发，重点讨论了各设计层次优化功耗的方法；
The two area optimization methods, which are the resource sharing of the circuit structure and the serialized method, are illustrated through examples.
通过实例给出了面积优化的两种方法：电路结构上的资源共享法和串行化方法。
Then the circuit parameters related to the output characters of the laser were measured to supply the gist of the further optimization of the laser source.
并测量了与激光器输出特性相关的电路参数，为该激光光源性能的进一步优化提供了依据。
The optimization and asynchronous design of sequencing circuits and high level circuit design and optimizing techniques are described in particular.
重点介绍了时序电路的优化、异步设计、高层次电路设计和优化技术。
In this paper, the optimization method was used to design the interface circuit, and use VHDL description to design low voltage digital delay timer.
在电路设计过程中，对后级接口电路进行了最优化设计，采用VHDL描述的方式实现了低压数字延时电路模块的设计。
UPS primary circuit and its switching circuit are analyzed, optimization solution is recommended.
分析比较UPS一次及其配电电路，推荐优化方案；
This experiment lays a foundation for the optimization of RTT and RTD HEMT monolithic integration circuit development.
实验为RTD/HEMT串联型RTT性能的优化和RTD/HEMT单片集成电路的研制奠定了基础。
An algorithm for optimization of circuit area through redundancy removal is proposed.
文章给出了一个通过去除冗余的方法，实现了电路面积优化的算法。
In this paper, a method of power optimization based on form of design of switch-capacitance circuit is proposed.
文中提出基于开关电容电路设计形式的功耗优化方法。
Skin-electrode impedance balance was approached through a circuit for automatic matching and gradual approximation optimization algorithm.
这种方法通过设计皮肤电极阻抗自动补偿电路和逐次逼近优化算法实现皮肤电极阻抗自动平衡。
Our remote controller realizes the control on various kinds of electric apparatuses through the circuit of the high stability and optimization code of high anti-interference.
我们的遥控器是通过高稳定性的电路和高抗干扰的优化编码来实现对各种电器的控制。
This model is suitable for the circuit analysis program, process tolerant analysis and device design optimization.
本模型可用于电路分析程序，工艺容错分析及器件的优化设计。
For a quantum base circuit, semi-template can provide all the templates based on this base circuit and improve the optimization efficiency.
对于模板的基本电路，类模板可以提供基于该基本电路的所有的有效模板，提高了电路优化效率。
This paper proposes a queue loop optimization algorithm to remove explicit redundancy completely which decreases the circuit area and improves the testability.
文中提出了显式冗余的队列循环优化算法，完全消除了此类冗余，从而有效地减少了生成电路的基片面积，提高了电路的可测试性。
Full-differential structure and bottom plane sampling technique and optimization of switch capacitor and MOS switch were used in this circuit.
设计中采用全差分结构和底极板采样技术，优化了开关电容和MOS开关。
Compared to others, the circuit design features lower cost, broader application and greater space for optimization.
其中电路设计层面具有成本低、适用范围广的特点，有很大的优化空间。
By full-custom design, the design optimization is carried out to improve the performance of ALU in the algorithm, circuit and layout level.
通过采用全定制设计方法，在算法、电路、版图等各个层次分别进行设计优化，使ALU的性能得到提升。
First, through the optimization of circuit design, matching line separation, ground line board design;
一是通过优化电路设计、配线分离，包括含接地线的线路板设计；
This paper realized the electric circuit center value optimization through to the Monte Carlo algorithm application.
本论文通过对改进的蒙特卡罗算法的应用，实现了电路中心值优化功能。
Based on an analysis of the equivalent circuit of the two-pole SAW filter with double-mode resonator, a formation-parameter model is advanced for the on-computer optimization of its design.
分析了声表面波双模谐振二极滤波器的等效电路，提出了利用计算机优化方法设计该滤波器结构参数的模型。
In addition, the causes and optimization scheme of defects in the original design for combustion air coefficient correction circuit have been discussed in detail, after putting the...
此外，对燃烧空气系数校正回路原设计缺陷的原因以及优化方案进行了详细讨论，优化方案投入实际应用后，取得了良好效果。
In addition, the causes and optimization scheme of defects in the original design for combustion air coefficient correction circuit have been discussed in detail, after putting the...
此外，对燃烧空气系数校正回路原设计缺陷的原因以及优化方案进行了详细讨论，优化方案投入实际应用后，取得了良好效果。
应用推荐