Finally a fully hardware circuit of the signal processing system based on LPC2214, which belong to ARM7TDMI microprocessor, is designed.
最后设计了ARM 7tdmi微控制器LPC 2214为中心的信号处理系统硬件电路。
Moreover, the potential control circuit and signal measuring circuit are designed and applied in controlling potential and processing the output signal of the sensor.
此外，设计并应用了电位控制和测量电路，实现了对传感器的电位控制以及输出信号的处理。
According to the principle of view the Doppler frequency detection, the detector makes up of the transmitter, the transfer circuit, receiver and signal processing circuit.
根据多卜勒频偏检测原理，该探测器由发射机、转换电路、接收机和信号处理电路构成，发射信号是设计的关键。
This paper adopts harmonic choice method to design fluxgate signal processing circuit in allusion to the environment magnetic field strength signal of fluxgate sensor detecting.
针对磁通门传感器检测到的环境磁场强度信号，运用谐波选择法，设计了磁通门信号处理电路。
Based on this mathematics model, the optimum signal-processing circuit, having high reliability and high stability, is designed and applied to the automatic measurement system of the focusing units.
基于该数学模型，优化设计了高可靠性、高稳定性的信号调理电路，并在聚焦元件自动测量系统中得到了实际应用。
Details of the sensor's structure, its working principle, the selection of working mode as well as the signal processing circuit is presented.
详细介绍了传感器的结构、工作原理、工作模式的选择以及信号检测电路。
The part of the hardware includes strain resistance, signal detecting circuit, data acquisition and processing system, etc.
硬件部分主要包括应变电阻片、信号检测电路、数据采集与处理系统等。
This paper introduces the application and design methods of a large scale Complex Programable Logic Device (CPLD) in radar signal processing system moving target detection circuit.
介绍了一种大规模复杂可编程逻辑器件(CPLD)在雷达信号处理系统中动目标检测电路的应用及具体实现方法。
The signal processing and amplier circuit of sensing net and its data processing system are introduced.
介绍了其传感网络的信号处理与放大电路及其数据处理系统。
The measuring function of short persistence oscillograph can be extended by adding pulse wave collecting circuit and signal processing circuit.
通过增加脉搏波采集电路和信号处理电路，扩展短余辉电子示波器的测量功能。
Introduce a relatively small typical capacitance measurement circuit and its basic principle, the use of digital signal processing technology to achieve small capacitance measurement method.
介绍了比较典型的微小电容测量电路及其基本原理，提出了采用数字信号处理技术实现微小电容的测量方法。
The laser target shooting system consists of semiconductor laser gun, photoelectric detector, and signal processing circuit, which is the key part of the whole system.
激光打靶系统主要包括半导体激光枪、光电探测器和信号处理电路，信号处理过程是整个系统的关键。
The experimental results show that the circuit can generate typical impulse noise, white noise and mixed noise that has wide applying value in the study of signal processing.
实验结果表明，这种电路能产生典型的冲击干扰、白噪声以及在信号处理研究中很有实用价值的混和噪声。
In this paper the algorithm selection of maximum entropy spectral estimation circuit in digital signal processing system is investigated.
本文针对数字信号处理系统中最大熵谱外推电路的算法选择进行了研究。
Firstly, the paper introduce the basic flow of Digital Circuit system design based on FPGA and the body content of RDSP (Radar Digital Signal Processing) .
本文首先介绍了利用FPGA设计数字电路系统的流程和雷达数字信号处理的主要内容。
The above system chiefly consists of light source, optic fiber sensor, photo detector and signal processing circuit.
应变测量系统主要由光源、传感光纤、光电探测器和信号处理电路组成。
The theoretical formulas of discrete signal processing and circuit structure in the system are described, and results of wind-speed measurement are analyzed and compared.
文中详细介绍了时空域离散信号处理的理论计算公式和处理系统结构，对风速测量结果进行了分析和比较。
Compared with DC coupling signal processing, it need lower requirement of signal processing circuit and have the merit of high signal-to-noise performance although it require the device of modem.
同直流信号直接耦合处理相比，交流信号耦合虽然要增设调制解调装置，但对后级信号处理电路的器件要求更低，信噪比更高。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
To integrate the sensor with its measurement circuit, the CMOS capacitance signal processing circuit is designed based on the theory of capacitor switch circuit.
为便于实现传感器与测量电路的集成，基于开关电容电路的原理设计出了频率输出的CMOS电容信号处理电路。
From the viewpoint of system, the paper analyzes the principle of the signal processing method, and discusses the design consideration of each block of the circuit system.
本文从系统的角度出发，分析了信号处理电路的基本原理，讨论了各单元电路的设计方法。
The work principle of the PVDF piezoelectric-film sensor was presented, and the design of its signal processing circuit was also discussed.
介绍了聚偏氟乙烯(PVDF)压电薄膜传感器的工作原理，并设计了相应的信号处理电路。
The functions and characteristics of the CCD signal processor XRD4460 are introduced, and the hardware and software design of CCD signal processing circuit based on XRD4460 is presented in detail.
本文介绍了专用CCD视频信号处理芯片XRD4460的功能与特点，并利用该芯片设计一种CCD视频信号处理电路，给出了其详细的硬件和软件设计。
The transverse slave control system was designed with the AT89C51 SCM from ATMEL Company. It consisted of sensing test circuit, signal processing circuit and output control circuit.
并设计完成了以atmel公司的AT 89 C51单片机为核心，由传感检测电路、信号处理电路、输出控制电路等构成的横向随动控制系统。
The hardware of the system is made up of P89C61X2BA as main processor, USBN9604 as USB interface, grating signal-processing circuit, XC95108 as signal subdivision, sensing, counter circuit and so on.
硬件部分以P89C61X2BA为控制核心，包括采用USBN9604接口芯片的USB接口电路，光栅尺输出信号处理电路，以XC95108为主的信号细分、辨向和计数电路等。
Based on the working principle of VSP1012 video signal processing interface for CCD imaging system, video signal processing circuit and its hardware have been designed for CCD imaging system.
在分析VSP1012型CCD视频信号处理芯片工作原理的基础上，设计了CCD成像系统的视频信号处理电路及其硬件电路。
Steel pipe flaw testing principium is briefly described, pipe flaw testing signal is analyzed, the design and simulation of signal processing circuit are discussed in detail.
介绍了钢管管缝检测原理，对管缝检测信号进行了分析模拟，对信号处理电路的计算机仿真设计及参数选择进行了较详细探讨。
Steel pipe flaw testing principium is briefly described, pipe flaw testing signal is analyzed, the design and simulation of signal processing circuit are discussed in detail.
介绍了钢管管缝检测原理，对管缝检测信号进行了分析模拟，对信号处理电路的计算机仿真设计及参数选择进行了较详细探讨。
应用推荐