Cooperate with the design of LCD display, let the charging process digital and visualization.
配合液晶显示屏的设计,让充电过程数据化、可视化。
An equation for calculating the input capacity during constant-voltage charging process is also derived.
推导出了恒压充电过程充电量的计算公式。
In this model, the charging process of the micro particle and the sheath dynamics is considered self consistently.
利用射频鞘层动力学模型,研究了鞘层电场和尘埃颗粒的充电过程。
Analysis shows that the accident is caused by manmade factors and possibly by incorrect operation in charging process.
分析认为,该事故属人为因素导致,即可能是装药过程中操作不慎。
The algorithm of the system is based on the selective equalization model formed from the discretization of continuous charging process.
系统的算法基于对连续充电过程进行离散化后得到的选择式均衡充电模型。
As they do so, the electrons that were paired with them in the anode during the charging process are released. These electrons power an external circuit.
电池放电时,正极释放出的锂离子快速运动回到负极,充电过程中在负极由锂离子携带的电子被释放出来,从而为外部电路提供电力。
Therefore, it is suggested that the majority of consumers in the charging process must pay attention to avoid high temperature and excessive charging.
因此,建议广大消费者在充电过程中一定要注意避免高温和过度充电。
Charging units as well as financial department shall work out interior checking system, ensuring supervision and control for the whole charging process.
收费单位和财会部门要制定收费内部稽核制度,保证对收费过程监督、控制。
When battery reaches a maximum safe predetermined voltage, the digital sensors and microprocessor automatically switch into stage 2 of the charging process.
当电池电压达到预定的最高安全电压,数字传感器和微处理器将自动切换到第二阶段的充电过程2。
According to the problems in charging and discharging process of lithium-ion battery, a kind of protection circuit based on software and hardware was designed.
针对锂离子蓄电池在充放电过程中容易出现的过充、过放、过流、过温问题,设计了基于软硬件保护的锂离子蓄电池保护电路。
The traditional normal method for charging up storage battery is the constant voltage or constant current charge. In the charging process 10 to 20 hours are used.
传统的常规蓄电池充电方法都采用小电流的恒压或恒流充电,充电时间长达10 ~20个小时。
The charging technique with L-C constant-current converter is adopted, and the repeated charging and discharging process of the device is controlled by voltage feedback.
研制了一种检测氧化锌避雷器阀片的重复频率充放电装置,采用L C恒流充电技术,通过电压反馈法控制充放电运行过程。
Research shows the SVG can effectively compensate reactive power and govern power factor of the grid the voltage fluctuation when the chargers work in the charging process.
结果表明充电机工作于充电过程时,SVG可以对无功进行有效的补偿,对电网的功率因素、电压波动具有有效的治理作用。
The kinetic mechanism for the behaviour of membrane conductance was given according to the ion diffusion in the membrane and the charging process in the equivalent circuit.
膜电导的上述行为可用离子在膜中的扩散解释,还可用电荷对电极等效线路的充电解释。
The detailed analysis of charging process in the pulsed intense-electron-beamaccelerator is presented. And the expression of voltage-transition coefficient isdeduced as well.
本文对强流脉冲电子加速器的充电过程进行了分析,并推导出电压传输系数的解析表达式。
Chaoyang moving company has a complete set of charging process, is on the basis of how many degree of place and difficult to move items fee, there will be no late some additional costs.
朝阳搬家公司都是有一整套的收费流程,会依据搬迁物品多少及场所艰难程度来进行收费,也不会有后期的一些附加费用。
The two dimensions mathematical model for the hot transferring and charging process of ingot system has been introduced in detail on the basis of the heat transfer theory in this paper.
在全面系统分析了某公司钢锭热送热装系统热过程传热机理的基础上,建立了钢锭冷却、加热过程二维传热数学模型。
Described are the application of the fuzzy control theory and intellectual analysis technology in the train brake charging process and in the analysis of the brake troubles in Fuyang Depot.
介绍了模糊控制理论与智能分析技术在阜阳车辆段研制的列车制动充风过程中以及在制动机故障分析中的应用情况。
The high temperature and quick rolling technology was applied based on the hot delivery and hot charging process combining with regenerative reheating technique in Shaoguan Iron and Steel co.
介绍了韶关钢铁股份有限公司三轧厂将连铸坯热送热装技术与蓄热式加热炉加热技术有机地结合,采用高温快轧工艺,不仅使企业实现了节能降耗,而且提高了生产率和产品质量。
According to this, the formation mechanism on hot charging process crack of steel ingot is concluded, thus offering a theoretical basis for preventing hot charging process crack in production.
在此基础上分析了钢锭红送裂纹的形成机理,为生产中防止产生红送裂纹提供了理论依据。
According to the double closed loops speed regulation system and requirements for the power control for the wind farm, a novel control strategy for the charging process of the FESS is designed.
结合无刷直流电机双闭环调速系统和风电场功率控制要求设计了飞轮储能系统充电运行的控制方案。
The manager consists of charging and discharging channels and the charging process is controlled by MCU. To ensure the safety of charging process, the battery voltage and temperature are monitored.
该电池管理器由充电和放电两个不同回路构成,采用单片机进行充电控制,单片机在充电过程中对电池电压和电池温度进行监控,保证电池的安全充电。
Supercapacitors could be an ideal storage device for fast, frequent charging, as opposed to the slow, hours-long process used by many of today's plug-in vehicles.
相比如今缓慢的充电过程,超级电容将是快速、频繁充电的理想存储装置。
The order is in the process of charging the card.
该订单处于信用卡扣款授信过程中。
During the process of tracing, the effect of line charging power is considered, and circumfluence is detected and settled.
在潮流跟踪的过程中,考虑线路充电功率的影响,并对环流进行检验处理。
It briefly introduces the process of producing medium and low carbon ferrochromium with hot charging ferrochromium in electro-silicothermic method as well as the economic benefit obtained.
简要介绍了采用热装硅铬的电硅热法生产中低碳铬铁的过程和所获得的经济效益。
The process is briefly presented form loading material, charging furnace, converting, slagging to tapping of steel and slag.
简要介绍了转炉炼钢从上料开始到装炉料、吹炼、造渣、出钢、出渣的工艺过程;
Describes the basal principle, function and work process of charging circuit in SIEMENS mobile X-ray machine.
阐述了西门子移动X线机充电电路的基本功能和工作过程,并分析和排除了该部分产生的故障。
Describes the basal principle, function and work process of charging circuit in SIEMENS mobile X-ray machine.
阐述了西门子移动X线机充电电路的基本功能和工作过程,并分析和排除了该部分产生的故障。
应用推荐