The theory and design method of resonance charging circuit are provided.
详细介绍了充电回路的设计理论和方法。
Rectifier units with a capacity of 20 to 25 amperes for each charging circuit are acceptable.
每条充电线路可容纳容量为20—25安培的整流装置。
The high-voltage pulse generating circuit comprises a charging circuit and a discharging circuit.
其中充电电路、储能电容、放电电路依次连接,构成一个回路;
Every charging circuit possesses "backlash" control function which can avoid the vibration of static switch.
各路充电电压检测具有“回差”控制功能,可防止静态开关进入振荡状态;
Describes the basal principle, function and work process of charging circuit in SIEMENS mobile X-ray machine.
阐述了西门子移动X线机充电电路的基本功能和工作过程,并分析和排除了该部分产生的故障。
The paper introduces simply the operational principle of the resonant invert charging circuit of line-type modulator.
本文简单介绍了线型调制器谐振式逆变充电电路的工作原理。
However, an ammeter is used on many cars. It provides abetter idea to the driver of what is happening in the charging circuit.
也有许多汽车使用电流表,电流表能使驾驶员更加了解充电电路中所发生的情况。
However, an ammeter is used on many CARS. It provides a better idea to the driver of what is happening in the charging circuit.
也有许多汽车使用电流表,电流表能使驾驶员更加了解充电电路中所发生的情况。
The charging circuit structure, the principle of various functions unit as well as the design of assistant power supplier are also introduced.
硬件设计部分还介绍了充电电路的结构、各功能单元的工作原理以及辅助电源的设计。
The utility model relates to an intelligent charged cell module, which comprises a casing, a storage battery arranged in the casing and a charging circuit board.
一种智能充电电池模块,包括外壳和装于其内的蓄电池组以及充电电路板。
In the case of repetition mode of the pulse power supply, Fast charging circuit is designed to enhance the stabilize and charging efficiency of the DC power supply.
为满足脉冲电源重复频率运行时直流电源的稳压性问题,设计了晶闸管快速充电自停自补单元,同时也提高了整个电源系统的效率。
According to the structure of impulse voltage generator, the EMTP simulation software is used to build a 36-stage charging circuit model of impulse voltage generator.
再根据冲击电压发生器结构,使用EMTP仿真软件搭建36级冲击电压发生器充电回路模型。
The objective of this paper is to present a novel design of the bidirectional charging circuit used in the high frequency magnetic stimulator to lower the electric power consumption.
但由于达到神经电位阈值所需的磁刺激脉冲能量较大,对电源功耗的要求限制了磁刺激的高频应用,本文研制了一种用于高频磁刺激仪的双向充电电路,用以降低功率消耗。
This paper presents a novel non-contact charging circuit which is suitable for pocket electric appliance's charging after the drawback of the novel non-contact power transfer system.
本文以新型无接触能量传输系统为背景研究了一种适合于给小型家用电器充电的无接触式的充电电路。
Because the capacitor voltage always changes in the course of charging, and the equivalent load also changes in a large range, the load characters of charging circuit are required strictly.
由于电容在充电过程中,其电压不断改变,其等效负载也在较大的范围内变化,因而对充电电路的负载特性提出了较高要求。
As they do so, the electrons that were paired with them in the anode during the charging process are released. These electrons power an external circuit.
电池放电时,正极释放出的锂离子快速运动回到负极,充电过程中在负极由锂离子携带的电子被释放出来,从而为外部电路提供电力。
The charger adopts special charging management chip control, high reliability, fast charging, overcharge protection, short circuit protection, trickle charging status indication.
充电器采用专用充电管理芯片控制,高可靠性、快速充电、过充保护、短路保护、涓流充电、状态指示。
Open circuit voltage to determine the residual capacity of battery, and then adopt different methods to supplement the Germany sunshine battery charging.
开路电压判断电池的剩余容量,然后采用不同的方法对德国阳光蓄电池进行补充充电。
To solve the problem of uniformity of power Li-ion battery series, an equal charging scheme of managing circuit was proposed in this article.
为了解决动力锂电池组使用中的一致性问题,本文提出了一种均衡充电管理电路的实现方案。
This paper introduces the control circuit principle and fault analysis of starting and charging system on NISSAN car and maintenance examples are given, which are good for the trouble-shooting.
系统地介绍了尼桑汽车起动系和充电系控制电路的原理及故障分析,并给出了检修实例,有利于准确、快速地排除该类车型的故障。
A short circuit, over current and over heat are short circuit, over current and over heat, and the charging indicator light on the charger is not bright.
电源断电或充电电路出现短路、过流、过热时,充电器上的充电指示灯均不亮。
A built-in safety circuit disables the lift when it is in the charging position.
内置的安全电路禁用电梯时,在充电的位置。
Safer charging: Designers reduce excess heat by controlling the integrated circuit temperature and optimize thermal performance with a thermal-regulation loop.
安全充电:设计师通过控制集成电路的温度降低多余的热量和热调节环路,优化了散热性能。
This paper designs the main circuit of the recharger, control methods under different charging ways, and does experimental analysis for different control modes.
本文设计了充电机的主电路,并设计了不同充电方式下的控制方法,同时针对不同控制方式进行了试验分析。
According to the problems in charging and discharging process of lithium-ion battery, a kind of protection circuit based on software and hardware was designed.
针对锂离子蓄电池在充放电过程中容易出现的过充、过放、过流、过温问题,设计了基于软硬件保护的锂离子蓄电池保护电路。
Besides the storage battery charging, it works as a stable 110v auxiliary power supply which provides electric energy to the control system and signal produced circuit.
它除了给机车上的蓄电池充电之外,还给机车提供稳定的110V辅助电源,为控制系统以及信号发生电路供电。
Besides the storage battery charging, it works as a stable 110v auxiliary power supply which provides electric energy to the control system and signal produced circuit.
它除了给机车上的蓄电池充电之外,还给机车提供稳定的110V辅助电源,为控制系统以及信号发生电路供电。
应用推荐