In this paper, the current technology of ceramic sintering is mainly introduced.
主要介绍了当前较重要的陶瓷烧结新工艺。
And from several forming crystal structure, ceramic and ceramic sintering, toughening, detailed introduction of the ceramic materials.
并从陶瓷的晶体结构、陶瓷的成型与烧结、陶瓷的韧化等几个方面详细的介绍了陶瓷材料。
The experimental results show that the present lining-ceramic sintering technology can effectively reduce gas bubbles formed during pouring.
结果表明：钢水余热烧结衬瓷技术保证了浇铸时产生较少的气泡，且衬瓷面平整，达到了可以应用的程度。
The experimental results show that a fast ceramic sintering with high stability and repetition could be realized through suitable control of heating profile and improving of hybrid heating structure.
实验表明：通过合理的保温结构和工艺控制，可实现高稳定性和重复性的微波快速烧结。
Ceramic elements are made by pressing and sintering finely powdered materials.
陶瓷元件是将仔细研磨的材料经过加压和烧结制成。
In sintering, ceramic powders are processed into compacted shapes and then heated to temperatures just below the melting point.
在烧结过程中，陶瓷粉末先挤压成型然后加热到略低于熔点温度。
Ceramic elements are made by pressing and sintering finely powdered materials.
陶瓷元件是将仔细研磨的材料经过加压和烧结制成的。
The processes of rapid forming solid parts by laser sintering ceramic powder include laser sintering and second sintering post treatment.
激光烧结陶瓷粉末快速成型三维零件的过程包括激光烧结和二次烧结后处理两个步骤。
There are many techniques for fabricating ceramic films such as PVD, CVD, high-temperature sintering and sol-gel method.
陶瓷薄膜的制备技术多种多样，如物理气相沉积、化学气相沉积、高温烧结和“溶胶-凝胶”法等。
Polymer coated ceramic powder can be used to manufacture mold shell with selective laser sintering technology, and the mold shell is usually used to cast and produce metal part.
利用激光烧结快速成型技术可以烧结覆膜陶瓷材料，形成铸造用型腔壳体并直接应用于铸造，制作金属零件。
This paper reports the detailed investigations on the composition, shaping process and material sintering of zirconia ceramic ferrule for PC type of fiber optic connectors.
本文对陶瓷pc型光纤活动连接器的关键部件二氧化锆插针体的材料配方，材料成型，材料烧结工艺进行了详细的研究。
The preparation and mechanism of bonding for aluminum phosphate as binder, raw materials and its ingredient, drying and sintering for the flat ceramic filter have been discussed.
讨论了磷酸铝粘结剂的制备工艺及粘结机理，陶瓷型过滤片的原料组成和配比，烘干和烧结工艺。
Now, it is an urgent need for electronic ceramic industry to solve the problem that insulative materials must be obtained at low sintering temperature.
低温烧结绝缘材料是当前电子陶瓷行业迫切需要解决的问题之一。
Based on the Practical production of the ceramic envelopes, several common sintering defects are attentively analysed and some appropriate improving measures are advanced.
根据电真空陶瓷管壳的生产实践，对陶瓷管壳常见的烧成缺陷进行了较为仔细的研究分析，并提出了一些相应的改进措施。
Through(sintering) experiment, the adhesive effect of silicon gel in ceramic mould is verified.
通过烧结实验，验证了硅溶胶在陶瓷型中的粘结作用；
It was mainly studied that the effect of the inorganic-organic composite plasticizer on the characteristic of extrusion molding and sintering of poor plastic ceramic materials.
着重研究了有机—无机塑化剂对瘠性陶瓷原料挤塑成型及烧结性能的影响。
It is mainly used for sintering of hard alloy, magnetic alloy, ceramic and powder materials.
主要用于硬质合金、磁性合金、陶瓷及粉体材料的烧结。
As a new method of ceramic material sintering, microwave sintering has been improved rapidly in recent years.
微波烧结作为一种陶瓷材料烧结的新方法，近年来得到飞速发展。
In the ceramic industry, since the processing performance of each product is different, ceramic has the strict requirement to sintering temperature.
在陶瓷生产领域，陶瓷产品由于各自的工艺性能不同，对其烧结温度都有严格的要求。
The ceramic of CBZP series were made by pressing and sintering, the affection of sintering conditions to mechanic character were investigated.
将CBZP系列粉体干压成型，用无压烧结制成CBZP系列陶瓷，研究了烧结条件对致密化程度及其力学性能的影响。
The material can be prepared to transparent ceramic with excellent transparency with the processes of hot pressing, hot isostatic pressing and vacuum and hydrogen gas sintering.
采用热压、热等静压和真空、氢气中烧结工艺、可将上述材料制备成具有良好透明性的透明陶瓷。
The influence of sintering temperature and holding time on the density, micro-structure and mechanical properties of the ceramic tool materials are studied.
对烧结温度、烧结时间等工艺参数对材料力学性能、微观结构和致密度的影响进行了分析。
Therefore, the functional ceramic coating of the invention can be produced with out sintering, and the manufacture technique is simple as well.
因此，本发明功能陶瓷涂料不必经过烧结制成，从而制作工艺简单。
Methods for the preparation of nano-ceramics including the preparation, molding and sintering of nano-ceramic powders are introduced in the paper.
主要介绍了纳米陶瓷的制备方法，包括纳米陶瓷粉体的制备、成型和烧结。
Hexagonal nitride boron is laminate structure ceramic materials. Solving the sintering densification problem is the main method to improve the ceramic performance.
六方氮化硼是一种片状结构材料，解决其烧结致密化问题是提高陶瓷性能的主要途径。
The prepared powder has fine sintering property and is applicable to sintering transparent ceramic.
制备的粉体具有良好的烧结性，适合用来烧结透明陶瓷。
Diffuser disc is produced from aluminum oxide and ceramic bonded together with high sintering temperature.
曝气盘采用氧化铝磨料和陶瓷结合剂高温烧结而成。
In this paper, the influence of sintering technology on the microstructure and mechanical properties of the silicon nitride ceramic were studied.
研究了烧结技术对氮化硅陶瓷显微结构和力学性能的影响。
The sintering of the tile is suited to the sintering technology with a large adjustment of addition proportion of the breakage sanitary-wares, polished tile, ceramic tile and polished-tiles debris.
依此方案生产透水砖，陶瓷破损料和陶瓷废料的加入量最多可占到75%，在较大范围内调整破损洁具、抛光砖、瓷片和抛光砖磨屑间的加入比例也可以适应烧成工艺。
The sintering of the tile is suited to the sintering technology with a large adjustment of addition proportion of the breakage sanitary-wares, polished tile, ceramic tile and polished-tiles debris.
依此方案生产透水砖，陶瓷破损料和陶瓷废料的加入量最多可占到75%，在较大范围内调整破损洁具、抛光砖、瓷片和抛光砖磨屑间的加入比例也可以适应烧成工艺。
应用推荐