Study on plasma sprayed nanostructured ceramic coating is one of the present promising fields in nanostructured coating.
等离子喷涂纳米陶瓷涂层的研究是目前纳米涂层领域研究热点之一。
A layer of ceramic film can be grown on ti alloy by the micro plasma oxidation.
在钛合金表面用微等离子体氧化能产生一层陶瓷膜。
The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation.
通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。
The paper gives a review on properties, failure mechanism and life prediction models of plasma sprayed ceramic coatings.
对有关等离子喷涂陶瓷涂层的性能、失效机理和寿命预测模型进行了综述。
To reduce the kerf width and to improve the kerf quality, the experiments of ceramic cutting with water constricted plasma arc are carried out.
为减小切口宽度，提高切口质量，进行了水再压缩等离子弧切割陶瓷实验研究。
A layer of ceramic film is produced by micro plasma oxidation on the surface of ti alloy in order to improve its corrosion resistant property.
为提高钛合金的耐腐蚀性能，在其表面用微等离子体氧化法生长一层陶瓷膜。
The test results of non-ablative ultra-high temperature ceramic materials(UHTC) in one of the plasma wind tunnels of CARDC are introduced in this paper.
介绍了在CARDC等离子体风洞中开展的非烧蚀型防热材料超高温陶瓷（UHTC）的试验研究结果。
A review is given on the research progress in nanostructured ceramic coatings prepared by plasma spraying at home and abroad.
等离子喷涂纳米陶瓷涂层是目前纳米涂层领域的研究热点之一。
Technical problems to which due attention should be paid in applications of the ceramic powder plasma spraying technique were expounded in this paper through practical examples.
通过实例，阐述了等离子喷涂陶瓷粉末技术应用中应注意的技术问题。
Plasma sprayed ceramic coatings with good corrosion resistance to liquid zinc were studied. Providinh a new project of liquid zinc corrosion coating by plasma spraying.
研究了等离子喷涂耐液锌腐蚀陶瓷涂层，提出了等离子喷涂耐液锌腐蚀陶瓷涂层的设计方案。
It is a new technology to sinter ceramic materials rapidly by means of the high temperature and high heat transfer rate of plasma.
利用等离子体的高温和高传热率快速烧结陶瓷材料是一项新技术。
A new ceramic coatings sealing faucet valve was developed by treating valve sealing surface with plasma spray surface treatment technology.
针对阀门密封面使用寿命低的的问题，采用等离子喷涂表面处理技术处理阀门密封面，研制了一种新型的陶瓷涂层密封旋塞阀。
Plasma micro-arc oxidation PMAO)is a novel technique, which can in-situ form the ceramic coatings on the surfaces of some non-ferrous metals.
等离子体微弧氧化是一种直接在有色金属表面原位生长陶瓷膜的新技术。
Plasma micro-arc oxidation (PMAO) is a newly developd technique for preparing ceramic coatings on metal surface.
等离子微弧氧化是一种新兴的材料表面陶瓷化技术。
In order to reduce the kerf width and improve the kerf quality, the hydromagnetically confined plasma arc was used to cut engineering ceramic plates.
为减小陶瓷板件切口宽度，提高切口质量，采用水箍和磁场对附加阳极等离子弧进行综合二次约束。
Hard and wear-resistant titanium nitride coatings were deposited by pulsed high energy density plasma technique on silicon nitride ceramic cutting tools at ambient temperature.
用高能量密度脉冲等离子体于室温下在氮化硅陶瓷刀具上成功沉积了高硬耐磨的氮化钛涂层。
Barium strontium titanate (BST) ceramic film is prepared on titanium substrate by micro-plasma oxidation.
用微等离子体氧化法在钛金属基体上制备钛酸锶钡(BST)陶瓷膜。
It is a technology that ceramic film is formed in condition of hyperthermia and heavy pressure produced by micro-plasma on aluminum alloy in given electrolyte.
微弧氧化技术是将铝合金置于电解液中通电使其表面产生微弧放电，而在铝合金表面原位生长一层陶瓷膜的表面处理技术。
In this paper, the axial-fed plasma spraying gun was used to obtain ceramic coatings on steels. Its parameters, properties and microstructure were compared with those of a traditional one.
对比研究了新型轴向送粉等离子涂枪和普通等离子喷涂枪的喷涂工艺参数和制备涂层的性能及其组织。
Plasma enhance electro-chemic al surface ceramic-coating (Microarc oxidation) is a new technique, which can in-situ form the ceramic coatings on the surfaces of some non-ferrous metals.
等离子体增强电化学表面陶瓷化(微弧氧化)是一项在有色金属表面原位生长陶瓷膜的新技术。
The method comprises: (1) sintering aluminum nitride ceramic at a low temperature by plasma-discharging sintering;
该方法主要包括三个部分：（1）利用放电等离子烧结技术实现氮化铝陶瓷的较低温度烧结；
The method comprises: (1) sintering aluminum nitride ceramic at a low temperature by plasma-discharging sintering;
该方法主要包括三个部分：（1）利用放电等离子烧结技术实现氮化铝陶瓷的较低温度烧结；
应用推荐