What this thesis dissertates is an Angle measuring system basing on CCD image processing.
文章论述了一个基于CCD图像处理的角度测量系统。
The realization of an astronomical CCD image processing system based on DSP is introduced.
介绍了一个基于DSP的CCD天文图像处理系统的软硬件实现。
It consists of a magnetic scanning system, a thick slit, a fluorescent screen and a CCD image processing system.
它包括有磁扫描系统，厚窄缝，荧光屏以及CCD图像处理系统。
The principle and design process of the system to measure the roundness error using the Lloyd mirror, linear CCD image processing system are described.
论述了系统利用劳埃德镜干涉装置，通过线阵CCD图像处理系统自动测量圆度误差的工作原理及过程设计。
The new idea based on CCD application technique and image processing technique being applied to non-contact measurement will solve those problems achieved hardly by contacting measurement method.
本文提出的CCD应用技术和图像处理技术应用于非接触测量中的新思路解决了用传统测量方法难以实现的问题。
A new laser shape profile measurement was discussed in this paper, which is a non-contact hot rolling shape measurement using club laser, CCD imaging technology and digital image processing.
本文研究的新型激光板形检测方法是利用棒状激光器、CCD成像技术和数字图像处理技术非接触式检测热轧板带钢板形的方法。
Methods we constructed an optical tweezers which consists of a Laser, a microscope, a CCD camera and computer image processing system, and manipulated some cells with the tweezers.
方法利用激光陷阱技术，用激光器、生物显微镜、CCD传感器和计算机图像处理系统构成一套光镊来进行操纵。
Based on the image processing technology, an auto-focusing system consisted of optical microscope, CCD, moment motor and drive gear etc, was presented.
介绍了一个基于图像处理的自动调焦系统，该系统由光学显微镜、CCD、力矩电机和齿轮传动机构等组成。
It can be measured precisely in general laboratories by image processing techniques and high speed CCD sensor so far.
当前采用高速CCD器件和图像处理技术在普通实验室就可以进行指向稳定性的精密测量。
A kind of new way to measure optical system focal distance automatically is proposed, which is based on CCD optical-electrical method and digital image processing method.
提出了一种基于CCD光电法和数字图像处理方法自动测量光学系统焦距的新方法。
The calculation method of CCD camera system and the essentials of digital image processing software design are introduced.
重点介绍CCD摄象系统设计的计算方法，数字图象处理软件的设计要点。
The linear light source of the near infrared, CCD technology and computer image processing technology have been applied in the software and hardware implementation of rail abrasion detection system.
采用近红外线状光源、CCD及计算机图像处理等技术，实现钢轨磨损检测系统的软硬件设计。
The angle of Moire fringes is obtained by processing on the Moire fringes image, which is captured into computers by CCD camera.
其中莫尔条纹由CCD采集到计算机中，通过对条纹图像的处理来得到莫尔条纹的精确角度值。
CCD array detector, frame-grabber card, image acquisition software constitute the image acquisition unit. The image processing software can store, display, process GeneChip image.
CCD面阵检测器、图像采集卡、图像采集软件构成了采集单元，图像处理软件可实现图像的存储、显示、处理功能。
According to contact glass level measurement defect, a continuous untouchable monitoring system for glass level is designed with help of advanced CCD technology and image processing technology.
本文针对接触式玻璃液位计的缺点，采用先进的CCD技术和图象处理技术，设计了一种连续的非接触的玻璃液位监测系统。
The captured image is reconstructed with interpolation according to PAL operating mode of CCD, thus is good for the follow-up image processing.
根据CCD的PAL工作制式，用内插法重建捕捉到的图像，以利于后续图像处理。
High speed CCD instruments and image processing methods including image correlation analysis were used to evaluate the model.
并利用高速摄影CCD和相关分析等图像处理方法对该模型进行了试验验证和分析。
This program processes and analysis the laser beam cross-section image captured by CCD camera using digital image processing technology to get the beam quality parameters.
此程序利用数字图像处理技术对CCD摄像机采集到的激光光束截面图像进行处理和分析，以获得光束的质量参数。
The hardware mainly includes CCD image sensor, analog signal processing, FPGA system and the lenses' driving system.
硬件部分主要包括CCD图像传感器模块、模拟信号处理模块、FPGA模块及镜头驱动模块；
The core parts of the system are CCD camera, microscope, im age collection and image processing.
以CCD相机为核心，结合显微镜放大、图像采集和图像处理构成检测系统。
The paper introduces an application of CCD camera to Range photogrammeter. It can replace the film recording. TV tracking system may be made up by digital image processing.
介绍了CCD摄像机在靶场光学测量设备中的应用，它可以取代摄影机的胶片记录，采用数字图像处理技术，构成电视跟踪系统。
This paper presents the measurement of wool diameter by the technology image processing and CCD, and then offers the theory behind measuring, methods, steps, and error analysis.
阐述应用CCD成像技术，利用图像处理手段，测量羊绒直径，并且提出了该装置的工作原理、方法、步骤及对误差的分析。
Developed countries have got successful experience in high performance image acquisition and processing system based on CCD image sensor. However, we still know little about such system.
发达国家对于基于CCD图像传感器的高性能图像采集和处理系统的开发已经具有了一定的经验和成功先例，而在我国，相关的技术开发还比较薄弱。
This paper applies the digital image processing to the welding workpiece picture, which is shot by CCD video camera in natural light, and detects the weld seam characteristics.
运用数字图像处理的方法，对电荷耦合器(CCD)摄像头在自然光下拍摄的焊接工件图像进行焊缝特征提取。
The principle of the measuring roundness error system used the equal thickness interference and CCD image-processing system is expatiated.
阐述了利用等厚干涉，通过线阵CCD图像处理系统自动测量圆度误差的测量原理。
The practical data processing results show that 3D buildings are reconstructed correctly by using real airborne CCD image and laser rangefinder data.
通过实际数据的处理和提取，说明了组合CCD图像和机载激光扫描测距数据可以自动重建建筑物的三维信息。
It is feasible that to use CCD device and image processing system in measurement of the modulation transfer function (MTF) of X-ray film and luminescent screen.
本文论证了利用CCD测定X射线胶片和增感屏调制传递函数的可行性，并给出了一种适用于CCD测试数据的处理方法。
So, it is a new technology and still a task of great challenge to use color CCD camera to acquire flame image and calculate the temperature that based on image processing.
应用彩色CCD摄像机获取炉膛内燃烧火焰图像，利用数字图像技术计算出锅炉内火焰温度是一个具有挑战性的课题。
So, it is a new technology and still a task of great challenge to use color CCD camera to acquire flame image and calculate the temperature that based on image processing.
应用彩色CCD摄像机获取炉膛内燃烧火焰图像，利用数字图像技术计算出锅炉内火焰温度是一个具有挑战性的课题。
应用推荐