Combining the interface design of CCD Camera System, the application of serial communication is introduced.
结合CCD相机系统的接口设计，介绍了串口通讯的应用方案。
The calculation method of CCD camera system and the essentials of digital image processing software design are introduced.
重点介绍CCD摄象系统设计的计算方法，数字图象处理软件的设计要点。
The vision inspection system consisting of multi-stripes projector and CCD camera finds a wide application in non-contact and online measurement.
由多条纹结构光投射器与CCD相机组成的视觉系统，广泛应用于非接触在线测量领域。
The system can push the wire conduit and the CCD pickup camera at its end into the pipe.
该系统能将电缆导管及其头部的CCD摄像头送进管道进行探测工作。
The modulation transfer function (MTF) is an important parameter in the performance of the CCD Camera imaging system.
调制传递函数是衡量CCD相机成像系统性能指标的重要参数。
This paper describes practical application of CCD in the inspection of porcelain machine. The system of measurement and drive circuit of CCD camera is introduced in detail.
介绍了CCD技术在陶瓷设备检测方面的实际应用，对检测系统和CCD摄像机的驱动电路的设计作了简单的介绍。
The system mainly consists of lighting lamp, reflecting prism, CCD camera and driving unit.
该系统主要由照明光源、反射锥镜、CCD相机和驱动机构组成。
The whole system was composed of a microscope, a spectrometer, an area CCD camera, an automatic stage and data acquisition and control subsystem.
整个系统由显微镜、分光计、面阵CCD相机、载物台自动装置以及数据采集与控制模块等几部分组成。
A construction of single CCD camera large view field measurement system and its tests are briefly introduced.
介绍了单个CCD摄像机大视场测量方法系统的搭建及测试情况。
The system chiefly consists of a confocal microscope, a CCD camera, testing stages, image grab card and a computer.
该系统主要由同轴显微镜、CCD摄像头、检测平台、图像采集卡和计算机组成。
The measuring system consists of a laser diode, an optical ring pattern generator and a CCD camera.
测量系统主要由半导体激光器、环形光发生器以及CCD摄像机组成。
The system is on the basis of principle of the structural light strip method, with the application of CCD pickup camera, linear laser light source, the computer image collecting and the software, etc.
介绍了一种基于结构光条法原理，运用CCD摄像机、线激光光源和计算机图像采集系统与软件等，研制出机车车辆轮对外形磨耗自动检测系统。
Objective To improve the image intensifying X-TV system by replacing the light-conduct camera with CCD camera for future usage.
目的：通过采用CCD摄像机取代老化的光导管摄像机，使影像增强电视系统继续发挥作用。
The chamber could produce even and invariable light for the CCD camera, and the vision system collected and transferred series of images information to computer memory at real time.
光照系统可为CCD摄像机的视区提供均匀和恒定的无影光照；图像采集系统可实时采集害虫的序列图像信息并送至计算机内存进行处理。
CCD driver system is the key part of digital camera, which is related camera's performance technical parameters.
CCD驱动系统是数码相机的核心部分，它关系到整个相机的性能和技术指标。
The paper describes the testing system for researching measurement of the railroad car wheel tread by means of CCD-video camera.
介绍了应用CCD摄像机检测铁道车辆车轮轨道接触面的研究试验系统。
The near arc area image is catched by a CCD camera through a specially designed visible light compound filter system.
由CCD摄像机通过特殊设计的复合滤光系统摄取近弧区图象。
Aviation imaging mechanism oriented to image intensified CCD camera was studied and an aviation imaging simulation system was developed using the computing kernel of LOWTRAN-7.
针对图像增强型CCD相机，研究了其成像机理，完成了基于大气软件LOWTRAN 7计算内核的成像仿真系统的研制。
The hardware in this measurement system of three-dimensional profilometry that consists of projecting light, CCD camera, image card and computer is designed.
设计了由投影光源、CCD摄像机、图像采集卡和计算机等组成的三维形貌测量系统硬件装置；
A digitized ruler with absolute code is adopted as the reference of the system, and the ruler is read by the reading system which is composed of optical system, CCD camera and computer.
该系统采用绝对码标尺做基准，使用由光学系统、CCD摄像机和计算机组成的读数系统来读取标尺数值。
The mainstream machine vision system, which is constituted by CCD camera, image acquisition card and computer, has some disadvantages of complicated structure, high-cost, large cubage and so on.
主流的机器视觉系统由CCD摄像头、采集卡和计算机组成，然而这类系统往往暴露出结构复杂、成本高、体积大等缺点。
This paper describes the design of a CCD digital camera applied to Machine Vision System.
本文设计了一款适用于机器视觉系统的CCD数字相机。
The performances and test methods of CCD image sensor and pickup system, and the imaging characteristic of high resolution CCD camera are studied.
研究了CCD图像传感器及CCD摄像机的性能及测试方法。 重点探讨了高分辨率的CCD摄像机的成像特点。
Cross semiconductor laser and CCD camera are used to set up a vision inspection system in this paper.
本文使用十字线激光器，配置CCD相机组成十字线结构光视觉测量系统。
Higher resolution CCD system, with 2 CCD camera and 1 cross laser beam. Can scan very detail and accurately.
高分辨率的CCD系统，2个CCD及1个十字激光发射器，扫描更清晰和精确。
In order to improve the precision of measurement, a new un-contact measurement system consisting of linear laser and single CCD camera was presented.
为了精确实现对空间物体的测量，提出了利用线激光、单CCD相机、小孔成像与激光面约束模型的激光线测量法。
The core parts of the system are CCD camera, microscope, im age collection and image processing.
以CCD相机为核心，结合显微镜放大、图像采集和图像处理构成检测系统。
The system includeS beam attenuator, single pulse selection and pulse synchronizing, beam matching, CCD Camera, frame grabber hard, monitor, computer and system software.
整个装置包括光束衰减器、单脉冲选取及脉冲同步、光束直径匹配、CCD摄像机、图像卡、计算机及监示器以及系统软件。
The design and study of the highspeed CCD video camera are introduced in accordance with the television measurement system with spacious fieldofview, high frame rate and multitarget.
针对大视场、高帧频、多目标电视测量系统，介绍了高速CCD视频摄像机的设计和研究。
A detection system based on ring laser used for inner wall of deep hole is proposed. The system mainly consists of ring laser, reflecting prism, CCD camera and driving unit.
提出了一种基于环形激光的深孔内膛检测系统，该系统主要由环形激光发生器、反射锥镜、CCD相机以及驱动装置等组成。
应用推荐