Above research can provide one method for computer aided cathode design.
论文提供了一种计算机辅助阴极工具设计方法。
The problem of cathode design is the key and difficult one should be solved first.
阴极设计是电解加工首先要解决的问题，也是电解加工中难以解决的问题。
The cathode design procedure is shown on a computer instead of cut - and - try in the practical machining.
该方法将生产实际中制造阴极的过程再现于计算机上。
This paper introduces electrochemical copying method for inner teeth machining as well as clamping apparatus and the tool cathode design. In addition, the technological parameters are given.
介绍了一种特殊齿形的内齿的电化学仿型加工，介绍了相关的工装夹具设计，工具阴极设计和修正以及加工工艺参数。
Cathode protection is one of the most effective methods for suppressing corrosion, while reasonable design, installation and maintenance are very necessary.
阴极保护是抑制腐蚀最有效的方法之一，但需合理设计、安装和维护。
The research results show that the design method is feasible, the error of designing calculation is smaller, and the complicated cathode shapes can be designed quickly and accurate.
研究结果表明，该阴极设计方法可行，设计计算误差较小，可以快速准确地设计出复杂的阴极形状。
Comparing design cathode with wheel profile shape, effects of dressing parameters, wheel profile, dressing voltage and conductance on design cathode profile were studied.
通过设计阴极与砂轮廓形的对比，分析了成形砂轮轮廓形状，修整电压和电解液电导率对设计阴极形状的影响。
Cathode production surpassed this design by 1997 through innovative process optimization and increasing the current density.
到1997年，通过工艺的革新优化，并提高电流密度，使阴极铜的产量超过了该设计能力。
This paper mainly discusses how to design a high stability current control power supply for laser gyro of double anodes and common cathode in North-Finder based on Ring laser Gyroscope.
论文主要阐述了寻北仪中双阳极共阴极结构的激光陀螺高稳定度稳流电源的实现过程。
To design electron guns with plane cathode according to high current electron optics theory.
根据强流电子光学理论，在填充等离子体条件下，设计平面阴极电子枪。
PAULWURTH came up with a modernization design of copper electro-refining based on METRO concept, used for the conversion from starting sheet to permanent steel cathode (PSC) process.
在从始极片向不锈钢阴极(psc)的工艺改造过程中，保尔·沃特提出了一种基于METRO理念的现代铜精炼电解设计。
This paper presents the principles of electrolysis-machining and the design of the cathode, including formulas for main dimensions, and recommends the related operating data.
本文阐述了电解加工原理，介绍了阴极结构及其各部位尺寸计算公式，推荐了有关工艺参数。
Design and fabricate the cathode tool and the anode clamping tool. Carry the experimentation of ECM by using the DJK3150 numerical controlling ECM machine tool.
设计和制作了阴极和夹具，在DJK3150数控电解加工机床上，进行了微细电解加工的实验。
This demixing effect leads to the difficulties in the control of alloy composition of coating and in the design of composition of alloy cathode target.
这种离析效应导致了合金涂层成分控制及合金靶材成分设计的困难。
The results of this study provided a new thought for structure design and development of a potential cathode material for rechargeable magnesium batteries.
该复合物研究结果为镁二次电池正极材料结构设计的开发提供了新的思路。
According to operating mode of the cathode in the thruster, the design of the cathode structure, including selection of the materials and the technology of the plasma spray, were described.
根据阴极在推进器中工作方式，对阴极结构设计进行了描述，包括材料选择和等离子体喷涂工艺制造。
By the research of vibration cathode chamber, the new improvement design, which is directed against the problem of the particulates in contact with the metal cathode, was put forward.
通过对振动阴极反应室的研究，针对粉粒与金属阴极接触的问题，提出新的改进设计。
The design approach for diode operating parameters including the diode impedance, cathode and anode are described.
阐述了二极管工作阻抗和阴阳极的设计原则，给出了设计参数。
The design approach for diode operating parameters including the diode impedance, cathode and anode was described.
阐述了二极管工作阻抗和阴阳极的设计原则与设计参数。
Special importance were attached to the design and calculation of deposition chamber, vacuum system, sample system, sputtering cathode and control system.
作为重点，对真空室、真空系统、工件架、磁控溅射靶、控制系统等进行了相应的设计分析和计算。
Special importance were attached to the design and calculation of deposition chamber, vacuum system, sample system, sputtering cathode and control system.
作为重点，对真空室、真空系统、工件架、磁控溅射靶、控制系统等进行了相应的设计分析和计算。
应用推荐