The instrument of filtered cathode arc deposition is successfully built in our laboratory. Diamond-like carbon film is maded.
研制了一套过滤式阴极电弧沉积设备，并利用该设备成功地获得了类金刚石薄膜。
The differences of discharge characteristics between the hollow cathode arc under low pressure and the conventional TIG arc under atmosphere are discussed.
本文介绍了空心阴极真空电弧焊接技术的特点及其放电机理，讨论了低气压下空心阴极电弧放电与常规电弧放电的不同特点。
The plasma source ion implantation device consists of pulsed negative high voltage power, hot cathode arc discharge system, vacuum chamber and target stage, vacuum system and monitor system.
等离子体源离子注入装置由脉冲负高压源系统、热阴极弧放电系统、真空室及样品台、真空系统和监测系统等五部分组成。
The composition generally changes from alloy cathode target to alloy coating deposited by multi arc ion plating to some extent.
采用多弧离子镀制备的合金涂层成分与合金阴极靶之间通常存在一定程度的偏差。
It was found that with increasing the cathode temperature the arc velocity decreases.
实验发现，随着阴极温度的增加，电弧的后退速度下降。
The results indicate that it has visible effect on restraining arc discharge and hollow cathode discharge as well as ion nitriding on high-chrome steel material surface.
结果表明，交流脉冲放电在抑制弧光放电和空心阴极效应方面是非常有效的，对于高铬钢材料表面的离子渗氮作用是明显的。
The forces applied on the molten pool at the cathode surface under the action of an external magnetic field during vacuum arc coating are analyzed.
分析了在外加磁场作用下，真空电弧镀膜中阴极靶面液池的受力情况，导出了液滴喷溅特性受磁场影响的关系式。
Brazing quality and product reliability are both increased as using high frequency pulse microplasma arc heating process for assembly brazing of cathode and photoetching grid of electron tube.
采用高频脉冲微束等离子弧做为电子管阴极和光刻栅极装配钎焊工艺的热源，提高了钎缝质量和产品的可靠性。
The cathode electric arc source is used as the source of ion infiltrating metals.
本文用阴极电弧源做离子渗金属源。
Cathode phenomena of vacuum arcs are the basis of vacuum arc coating (vac) technique.
真空电弧阴极现象是真空电弧涂镀(VAC)技术发辰的基础。
The characteristics of cathode spots arc were introduced in this paper.
介绍了阴极弧斑放电的基本特征。
The properties of the cathode fall region are discussed by applying one dimensional model of non equilibrium plasma region adjacent to an electric arc cathode.
采用一维非平衡等离子体模型讨论了阴极区的等离子体性质，阴极区被分为电离区和空间电荷区。
Aslo the paper has dealed with the mechanism of the hollow cathode vacuum arc discharge and analyzed the starting arc process according to the neutralizing theory of ionized gas.
根据电离气体中性化条件，初步探讨了在低气压下空心阴极电弧放电的引弧过程，分析了影响低气压下空心阴极电弧放电引弧电压的因。
The power has been used to conduct two sorts of experiments including both to restrain arc discharge and to control hollow cathode discharge.
采用中频交流脉冲等离子体源进行了抑制弧光放电和空心阴极效应以及离子渗氮工艺的实验。
By the technology of vacuum cathodic arc deposition, graphite as cathode, Diamond like carbon film (DLC) was deposited on PMMA resin denture.
采用电弧离子镀膜方法，以高纯石墨为碳离子源在PM MA树脂义齿表面沉积类金刚石膜。
The phenomenon of double arc which is usually caused by the reasons of too big welding current, too small diameter of the nozzle and eccentric of the cathode has been simulated.
针对造成双弧现象的原因，模拟分析了由于电流过大、喷嘴压缩孔径过小和钨极偏心三种因素所导致的双弧现象。
A multi-cathode metal vapor vacuum arc (WEVVA) ion source has been designed. It contains an array of 18 cathodes, any of which can be switched into operation rapidly while under vacuum.
设计了一台多阴极的金属蒸气真空弧离子源，它有18个阴极，任一阴极都能在真空状态下被迅速接入电路工作。
In breakers for medium-voltage ac circuits, the cathode-spot phenomena may be combined with methods for bringing about the lengthening and deionization of the arc path.
用于中压交流回路中的断路器，利用阴极辉点现象的方法和拉长电弧去游离的方法相结合。
Water-cooled cold-arc-cathode in cup-shape and tube-shaped anode are used.
采用水冷铜环形冷弧阴极和水冷筒状阳极。
Water-cooled cold-arc-cathode in cup-shape and tube-shaped anode are used.
采用水冷铜环形冷弧阴极和水冷筒状阳极。
应用推荐