Large catalyst amount is beneficial to liquefaction, but it is restricted by the consideration of cost.
催化剂用量增大对液化有利，但操作成本增加。
The influences of catalyst amount, microwave irradiation power and time on the reaction were investigated.
考察了催化利用量，微波辐射时间和功率对反应的影响。
The effect of alcohol to acid ratio, reaction time and temperature, the catalyst amount were investigated.
讨论了醇酸比、反应时间、催化剂用量对收率的影响。
The effects of organic promoter, catalyst amount, reaction temperature and time on the synthesis were investigated.
考察了有机助剂、催化剂用量、反应温度、反应时间等因素对反应的影响。
The effect of material ratio, catalyst amount, reaction temperature and time on the yield of adipic acid is studied.
探讨了物料配比、催化剂用量、反应温度、反应时间对己二酸产率的影响。
The catalytic activity increased with increasing polymerization temperature, catalyst amount and monomer concentration.
催化聚合活性随反应温度、催化剂用量和单体浓度的提高而提高。
After single factor optimization, temperature, catalyst amount and molar ratio of methanol to oil were the important factors.
在单因素优化的基础上，确定反应温度、催化剂用量及醇油摩尔比等为显著影响因素。
The effects of reaction temperature, catalyst amount and mole ratio of water to methyl acetate on conversion were investigated.
实验还测定了反应温度、催化剂用量和水酯比对乙酸甲酯水解率的影响。
The influence factors esterfication reaction, such as catalyst amount, acid alcohol mole ration, reaction time were investigated.
考察了催化剂用量、原料配比、反应时间对酯化反应的影响。
The effects of catalyst amount, mole ratio of sodium benzoate and benzyl chloride, reaction time on the esterification rate were studied.
考察了催化剂用量、釜残液与氯化苄的物质的量的比和反应时间对收率的影响。
The influences of catalyst amount, reaction temperature and reaction time were investigated, and the conditions for the reaction were optimized.
考察了催化剂的用量、油洛温度和反应时间对脱水反应的影响，得出了最佳反应控制条件。
The effects of reaction temperature, catalyst loading amount, reaction time, catalyst amount and oxidant amount on desulfurization were studied.
考察了氧化温度、催化剂负载量、氧化时间、催化剂用量、氧化剂加入量等工艺条件对脱硫率的影响。
Effects of catalyst amount, ratio of reactants, reaction time, reaction temperature and reuse of catalyst on degree of esterification were investigated.
考察了催化剂的用量，反应物的配比、反应时间、反应温度、催化剂重复使用等因素对反应的影响。
The effects of catalyst amount, reaction time, molar ratio of sec-butanol and acetic acid, and amount of deaquation reagent on the reaction were studied.
考查了催化剂用量、反应时间、醇酸物质的量比及带水剂用量对乙酸酯化率的影响。
The effects of the three different catalysts, catalyst amount, reaction time on the conversion of acrylic acid were researched. The reaction mechanism was discussed.
比较了三种催化剂及其用量、反应时间对丙烯酸转化率的影响，提出了可能的反应机理。
The curing process can be controled through optimum catalyst amount and curing conditions, sagging can be controled by rheology control agent. The test results were listed.
提出了该涂料的固化可通过优化催化剂用量和固化条件来控制，流挂可通过添加流动控制剂来控制，并列举了它们的试验结果。
The influences of reaction temperature, catalyst amount, axial ligand, concentration of styrene as well as the length, rigidity and flexibility of the linkers were investigated.
考察了反应温度、催化剂用量、轴配体、苯乙烯浓度以及双核锰配合物的配体中桥链长度、刚柔性、氧杂原子及其构筑的冠环结构对环氧化反应的影响。
In esterification reaction, the influences of catalyst amount, materials ratio, reaction time, prepared method of the expandable graphite on esterification reaction were discussed.
在酯化反应中，催化剂用量，原料配比，反应时间对酯化反应的可膨胀石墨的制备方法的影响进行了讨论。
The influence of acrylic acid and tetradecyl alcohol, amount of catalyst and inhibitor, reaction temperature, reaction time were investigated.
探讨了丙烯酸与十四醇摩尔比，催化剂和阻聚剂的用量、反应温度及反应时间对酯化反应的影响。
Do not attempt to control setting time by increasing or decreasing the amount of catalyst dispensed.
不要试图通过增加或减少催化剂的用量来控制产品的凝固时间。
The rate of solidification process increases with the concentration of the monomer solution, gelation temperature and the amount of the initiator and catalyst.
随着单体溶液浓度、固化反应温度、引发剂和催化剂加入量的提高，凝胶固化反应速率快速增长。
A new method for quantitatively measuring the surface acid amount of solid catalyst was set up on a self-made pulse chromatographic adsorbent reactor.
在自制的脉冲色谱吸附反应装置上建立了一种新的测定固体催化剂表面酸量的方法。
Effects of reaction temperature, reaction time, solvent, catalyst and its amount on prepolymerization was studied.
探讨了反应温度、反应时间、溶剂、催化剂及用量对预聚反应的影响。
Many synthesis parameters were investigated such as amount of catalyst, reaction time, molar ratio of alcohol to acid and different water carriers.
考察了催化剂用量、醇酸物质的量比、带水剂种类、反应时间等因素对收率的影响。
The effects of solidification time and temperature, types and amount of catalyst, and different grain sizes of quartz sand on sand consolidation effectiveness are discussed.
评价了固化时间、固化温度、催化剂的类型和用量以及不同粒径石英砂等因素对固砂效果的影响。
The effect of acid-alcohol ratio, acidity of catalyst, amount of catalyst, reaction time, and reaction temperature were investigated.
考察了醇酸比，催化剂酸度，催化剂用量，反应时间，反应温度对酯化产率的影响。
The proper amount of DBTL catalyst of reaction temperature were given.
确定了适宜的催化剂用量和反应温度。
By repeated tests, a proper amount of phase transfer catalyst in the TCR -step synthesis of paclobutrazol is fixed.
通过反复试验，确定了多效唑三步合成中相转移催化剂的最佳用量。
By repeated tests, a proper amount of phase transfer catalyst in the TCR -step synthesis of paclobutrazol is fixed.
通过反复试验，确定了多效唑三步合成中相转移催化剂的最佳用量。
应用推荐