The casting properties, physical properties and corrosion resistance of the alloy are determined.
测定了合金的铸造工艺性能、物理性能和耐腐蚀性能。
It had good corrosion resistance, better synthetical mechanical properties and casting properties.
它具有良好的耐蚀性能、较好的综合机械性能与铸造性能。
The nickel cost iron has good corrosion resistance, better mechanical properties and satisfied casting properties.
该镍铸铁具有良好的耐蚀性能、较好的机械性能与满意的铸造性能。
The casting properties of high strength Aluminum alloy ZL205A and the casting technology of complex Al Cu alloy stand casting were studied.
介绍高强ZL2 0 5A合金铸造特性，分析高强复杂铝铜合金支座铸件结构特点和工艺特性及支座铸件铸造工艺。
Improper calcium treatment will not only affect the casting properties, but also affect the solidification process of molten steel in mould.
钙处理不当时不仅影响钢水的浇铸性能，而且还会影响钢水在连铸结晶器内的凝固行为。
The effects of antimony and mischmetal on the casting properties of AZ31 alloy were investigated using the differential thermal analysis and hot tearing ring method.
用差热分析及热裂环法研究了锑和混合稀土对AZ31镁合金铸造性能的影响。
A new kind of aluminium alloy with satisfactory resistivity and good casting properties and good mechanical properties for motor rotors with high torque and high slip is found.
为高转矩、高转差率的电机转子找到了一种既满足电阻率要求，又具有好的铸造性能和好的力学性能的铝合金配方。
The influence of rare earth modification on the improvement of structure and corrosion resistance of Ni-base alloy for casting as well as on its casting properties is studied in this, paper.
本文研究了稀土变质处理对改善铸造镍基合金的组织和耐蚀性能与铸造性能的影响。
Our technical staff of high pressure boiler tube steel casting properties that mainly by casting metal liquidity, shrinkage characteristics, segregation orientation to comprehensive evaluation.
我们高压锅炉管的技术人员说钢的铸造性能主要由铸造时金属的流动性、收缩特点、偏析倾向等来综合评定。
The influence of the content of saccharin additive in sulphate bath on the microstructure and properties of Nickel deposit made by electric casting was investigated.
研究了硫酸盐镍电镀液的组成及浓度，特别是糖精添加剂含量对电铸镍沉积层组织形貌和性能的影响。
The composition of casting melting process was determined through experiments mechanical properties and structure of the material was tested examined and analyzed.
确定了铸件成分、熔炼工艺，对材料的力学性能和金相组织进行了测试和简要分析。
To improve the properties of the casting martensite stainless steels, the aging heat-treatment at different temperature was done.
为提高铸造马氏体不锈钢的性能，对其进行了不同温度下的时效处理。
During continuous casting of high aluminum steel, composition and properties of mold fluxes change obviously due to the slag-steel reaction.
高铝钢连铸过程中，钢渣反应将导致连铸保护渣成分和性能发生较大的变化。
In this paper the effects of pouring temperature, mold temperature, inoculants, and section size on the microstructure and mechanical properties of casting nickel-base superalloy K24 were studied.
本文研究了浇铸温度、铸型温度、孕育剂和截面尺寸对K 24镍基铸造高温合金的组织和性能的影响。
The effects of two patterns of squeeze casting on mechanical properties of ZA43 alloy were investigated through the analysis of alloy liquid flow and pressure loss.
从合金液的流动和压力损失的角度，研究了两种挤压铸造方式对ZA43合金力学性能的影响。
This paper introduces the casting precipitation properties, their effects on the alloy microstructure and the methods to eliminate the precipitation of the Low-expansion superalloy GH909. and GH907.
本文研究了低膨胀高温合金GH907、GH909铸态组织中偏析的性质，偏析对合金组织的影响，以及消除偏析的方法。
The effect of RE on the microstructure and mechanical properties of die casting zinc alloys was studied through modifying the alloys.
通过对压铸锌合金进行变质处理，研究稀土合金对压铸锌合金微观组织及性能的影响。
This paper is concerned with the design of vacuum full-mold casting equipment. The processing properties of this equipment are also studied in this paper.
本文通过设计和选择真空实型铸造主要工艺装备，试验研究了所设计的真空实型铸造装备的工艺性能。
The relations among composition, casting methods, room-temperature properties and elevated temperature properties of magnesium alloys are summarized systematically.
系统地总结了各类铸造镁合金的成分、铸造方式与其高、低温力学性能之间的关系。
The influence of squeeze casting technique on mechanical properties and microstructure of bar-shaped ZA27 alloy was investigated.
分析了挤压铸造工艺对棒状ZA27合金力学性能及组织的影响。
In addition, the new steel has also better synthetical mechanical properties and good technological properties of melting, casting and welding et al.
此外，新型钢还具有较好的综合力学性能与满意的冶炼、铸造和焊接等工艺性能。
Melt Purityporositymechanical properties relationships in casting aluminum alloys have been reviewed in this paper.
综述了铸造铝合金熔体洁净度-疏松-力学性能三者之间的关系。
The influences of aging effect, gravity casting and adjusted pressure casting on the mechanical properties of ZL101A T6 aluminum alloy are compared by experiment.
实验比较了重力铸造和调压铸造对ZL101A-T6铝合金的力学性能的影响。
The low sintering and low dielectrics substrate materials and their properties, and the organic additives for tape casting slurry are compared and analyzed.
对目前已研究和使用过的低介电常数和低烧结温度基板材料及综合性能，流延浆料有机添加剂进行了对比分析。
The paper also provides a technical review of the Austempered Ductile Iron fundamentals including various advantageous, mechanical properties and the unique casting process.
本文还提供了等温淬火球墨铸铁基本性能的技术回顾，包括各种各样的优点：良好的力学性能，以及独特的铸造工艺。
The investigation was carried out into the technological properties of microwave silicate sand, molding and core making, casting pouring, used sand reclamation and its properties.
研究了微波水玻璃砂的工艺性能、造型制芯、铸件浇注、旧砂再生及其再生砂性能。
The influence of miscible extent and casting technology on the morphological structure and properties of co blend membrane were analyzed.
分析了聚合物溶混程度变化及工艺条件改变对膜形态结构及使用性能的影响。
The casting process and reverse osmosis (RO) properties of Titanium cellulose acetate (TiCA) membrane have been studied.
本文对钛醋酸纤维素反渗透膜制膜工艺和膜性能进行了研宄。
The casting process and reverse osmosis (RO) properties of hydroxy-propyl cellulose acetate (HPCA) membrane were studied.
研究了羟丙基醋酸纤维素反渗透膜的制膜工艺和膜性能。
The casting process and reverse osmosis (RO) properties of hydroxy-propyl cellulose acetate (HPCA) membrane were studied.
研究了羟丙基醋酸纤维素反渗透膜的制膜工艺和膜性能。
应用推荐