The cast technology and the improvement design of workshop for aluminum wheel were introduced in this article.
介绍了铝轮毂铸造生产工艺及铸造车间改进设计。
Upon this, an optimized cast technology has been determined after 8 foundry technologies have been simulated combined with the production.
在此基础上，用数值模拟技术进行了八种方案的工艺优化计算后结合生产现场确定了优化后的工艺方案。
Qualified castings is produced on the basis of designing proper cast technology for supporting tile through analyzing cast features for ZA27 alloy.
从分析ZA2 7合金的铸造特点出发，制订了合理的托轮瓦铸造工艺，试制生产了合格铸件。
These voters can easily cast the wrong vote or be discouraged from voting altogether because of fear of technology.
这些选民很容易投错票，或者因为对技术的恐惧而不愿投票。
Migrate existing technology, including Command Destruct Systems and the Cast Glance stabilized photo-optical system, into the NP-3C aircraft;
将现存技术，包括指挥破坏系统和投掷扫视稳定光照片系统，移植到NP-3C飞机上；
The director of the "Back to the Future" trilogy, "Who Framed Roger Rabbit" and "Cast Away" is known for using pioneering technology to create otherworldly action in his films.
泽梅基斯所执导过的影片包括：《回到未来》三部曲、《谁陷害了兔子罗杰》、《超时空接触》、《飞越长生》等。
Clyde Tombaugh, the head of optics at the missile range and the discoverer of the dwarf planet Pluto, took him under his wing and helped him build telescopes from cast-off technology.
第一个发现矮行星冥王星的导弹射程的光学领头人ClydeTombaugh也将他招致麾下，帮他建望远镜。
The mill duty, cast iron construction of the 6200 accepts stainless steel sensor modules with patented magnetoresistive technology.
该工厂的责任，铸铁建造6200接受不锈钢磁阻技术与专利的传感器模块。
The open cast method is an advanced stripping technology with low operation cost.
拉斗铲倒堆剥离是一种先进的开采工艺，机械化程度高，开采成本低。
Cast iron bond diamond wheel and ELID grinding technology are used on a surface grinder to research the high efficiency grinding technique.
本文在平面磨床上应用铸铁结合剂金刚石砂轮与ELID磨削技术进行高教磨削研究。
It adopts advanced Cast Lamp light dissipation technology and modular design. Branch control is available.
采用先进的投光灯配光技术，模块化设计，可分路控制。
Thin-wall Pipe Pile Using Cast-in-situ Concrete (named PCC) technology and the application in soil improvement of Shanghai Beihuan express way are introduced.
本文介绍了现浇混凝土薄壁管桩技术及其在上海北环高速公路软基加固中应用。
Finally, electron beam modification technology of cast aluminum alloy is introduced.
介绍了铸造铝合金的电子束改性技术。
There are some essential technical characteristics of bronzes cast by lost-wax technology, which can be used to authenticate imitations and copies of Chinese bronzes.
本文是作者《失蜡工艺的起源与失蜡铸件的工艺特征》一文的姐妹篇，立足于探究中国古代的失蜡工艺。
In this paper the hot dipping aluminium technology of ductile cast iron and heat resistance of hot-dipped aluminium ductile cast iron are studied.
本文对球墨铸铁的热浸渗铝工艺和渗铝球铁的耐热性能进行了研究。
This simulating technology could give powerful support for aiding the design of foundry technology, optimizing foundry process and analyzing the cast defects.
该技术在辅助铸造工艺设计，优化工艺方案以及缺陷分析等方面可以提供有力的支持。
Density method are used to monitor and control the quality of aluminum liquid before cast, and the experimental result of aluminum alloys, refining technology are analyzed.
采用密度测试法对从熔化到浇注过程的铝液精炼质量进行监控，对铝液精炼工艺的试验结果进行分析。
Technology: cast iron heating it to good precast bent for the heating requirements. Add to die, from using hot metal casting, then finished, to be the ideal product.
工艺：铸铁加热板它把预制好的加热管弯曲成所需要求。放入模具中，用铁水浇铸而成，然后进行精加工，从而得到理想的产品。
This paper presents the application of modification technology in production of Al-Si alloys cast with Sr and puts emphasis on the characteristics of modification technology with Sr.
阐述了锶变质工艺在生产铝硅合金铸件中的应用，着重讨论了锶变质的工艺特点。
As-cast microstructure of Mg alloy AZ31 ingot and its annealing technology have been researched hence certain reference for direct plastic deformation from as-cast microstructure of Mg alloy AZ31.
研究了AZ31合金的铸锭组织及其退火工艺，为AZ31镁合金由铸态组织直接塑性变形提供了一定的参考依据。
From the Hammer Age to the Cast Age of modern times, prosthodontic technology will transfer to the age of CAD/CAM.
口腔修复工艺学从近代的锤造技术时代过渡到现代的铸造技术时代之后，又将从铸造技术时代过渡到CAD/CAM技术时代。
This paper introduces the cast in place cantilever construction technology used in uncontinous box beam of the Hanchuan Hanjiang River Bridge.
介绍汉川汉江公路大桥非连续段箱梁的悬臂现浇施工技术，可供有关工程技术人员参考。
The cast CAE technology based on solidification simulation of casting is a practical engineering technology.
基于铸件凝固模拟技术中的铸造CAE技术是一项实用性的工程技术。
The technology for tightness improvement of the Ni austenitic cast iron cable head is studied.
分析了提高镍奥氏体铸铁电缆插头铸件致密性的工艺方案。
This article focuses on the welding technology of the carbon steel, low alloy steel, stainless steel, cast iron and other metal materials.
本文主要阐述了碳钢、低合金结构钢、不锈钢、铸铁等金属材料的焊接技术。
Defects of crankshaft surface and body will produce important effect on engine reliability. This paper probes into flaw detection technology of forging steel and nodular cast iron of crankshaft.
曲轴表面及本体的缺陷，对发动机的可靠性有重要影响，对锻钢和球墨铸铁曲轴的探伤技术进行探讨。
Defects of crankshaft surface and body will produce important effect on engine reliability. This paper probes into flaw detection technology of forging steel and nodular cast iron of crankshaft.
曲轴表面及本体的缺陷，对发动机的可靠性有重要影响，对锻钢和球墨铸铁曲轴的探伤技术进行探讨。
应用推荐