The effect of melt-treatment technology on the as-cast microstructure of the sheet is remarkable.
熔体处理对罐用铝材铸态的微观组织结构产生了明显的影响。
The samples were heated in different extent of homogenization after analyzing the as-cast microstructure.
分析铸态组织后，将试样进行不同程度的均匀化处理。
As-cast microstructure of Mg alloy AZ31 ingot and its annealing technology have been researched hence certain reference for direct plastic deformation from as-cast microstructure of Mg alloy AZ31.
研究了AZ31合金的铸锭组织及其退火工艺，为AZ31镁合金由铸态组织直接塑性变形提供了一定的参考依据。
Aiming at the various defects in production, the effects of squeeze casting process parameters on AZ81 as-cast microstructure were investigated from formation mechanism and influence factors aspect.
针对试生产过程中铸件产生的各类缺陷，从其形成机理和影响因素方面进行分析，研究挤压铸造各工艺参数对AZ81镁合金的铸造组织的影响。
The influences of different microstructure, silicon content, quenching temperature and cooling rate of the SiCr white cast iron on its abrasive wear performance were investigated.
研究了硅铬白口铸铁不同组织、不同含硅量、不同淬火加热温度及冷却速度对其耐磨粒磨损性能的影响。
The cast iron modified by re offers refined microstructure in which the carbides become blocky or granular, thus increasing the mechanical properties.
经稀土变质处理的铸铁组织细化，其碳化物呈团块状或颗粒状，从而提高了力学性能。
The microstructure and composition of a high chromium cast stainless steel used in high temperature aqueous alkali with solid grains were designed.
设计了用于含有固相颗粒的高温碱介质中的新型高铬铸造不锈钢的组织及化学成分。
The as cast and heat treatment microstructure of ZA alloy rod directionally solidified by continuous casting has been analyzed.
对热型连铸锌铝合金定向凝固线材的铸态及热处理组织进行了观察、分析和讨论。
The microstructure and mechanical properties of heat-resistant and wear-resistant cast steel with different composition were studied under the same heat treatment condition by series of experiments.
对不同成分的耐热耐磨铸钢在相同热处理工艺条件下的组织及力学性能进行了一系列对比实验研究。
The chemical compositions of new cast alloy steel with high si content was designed, its microstructure and corrosion behavior were studied.
设计了一种含硅量较高的新型铸造合金钢，并研究了该合金钢的显微组织及其腐蚀行为。
Wear resistance and microstructure of grey cast iron processed by laser have been investigated by using aSEM model AMRAY-1000B. The laser processed zones contain two layers.
本文用amray—1000B型扫描电镜对灰铸铁激光处理后的显微组织及耐磨特性进行了研究。激光硬化区可分为二层。
In order to discuss the microstructure under slower cooling rate of as-cast AZ91D magnesium alloy, the slow solidification treatment was carried out.
为了探讨AZ 91d镁合金在较慢凝固冷却速度下的组织，对其进行了缓慢凝固处理。
The influence of tempering process on microstructure and mechanical properties of new type bainite cast steel was studied.
研究了回火工艺对新型贝氏体铸钢组织和性能的影响。
On the basis of the experimental data of microstructure and strength for gray cast iron with high carbon equivalent, a model of support vector machine for gray cast iron prediction was established.
利用高碳当量灰铸铁组织强度试验数据，提出了一种基于支持向量机理论的灰铸铁强度预测模型。
The microstructure and mechanical properties of a new type wear-resistant white cast iron with the boride as wear-resistant phase were investigated.
研究以硼化物为耐磨相的新型耐磨白口铸铁的组织特点与力学性能。
The microstructure morphology of spheroidal graphite cast steel after as-casting, annealing, normalizing, forging was investigated emphatically in this paper.
重点分析了球墨铸钢铸态、退火、正火、锻造后的组织特征。
The effect of multi element alloying on the microstructure and properties as cast of high chromium white cast iron has been studed.
本文研究了多元合金对高铬白口铸铁铸态组织和性能的影响。
The effect of chemical composition and microstructure of cast iron on iron-loss has been studied.
研究了铸铁化学成分和组织对铁损的影响。
The result shows that the abrasion capability of Ct-white cast iron has compact relations with its composition and microstructure.
结果表明铬系白口铸铁的抗磨料磨损性能与其成分和组织有着密切的关系。
Study metallographic structure of phosphor eutectic and boride in continuous cast iron. The microstructure of piston has been analyzed and proved after wear test.
研究水平连续铸造方式下高磷含硼铸铁中磷共晶和硼化物的分布特点，并进行超耐磨性试验，对磨损试验后材料的微观形貌进行试验验证分析。
This paper mainly studies the influence of the boron gray cast iron with its microstructure, mechanical properties and metallurgical quality index in different inoculating conditions.
同时研究了不同孕育条件对硼灰铸铁的力学性能及冶金质量指标的影响。
The carbides types, techniques preparation, microstructure, property, and applications range of three kinds of chromium white cast iron were introduced.
分析了三种铬系白口铸铁的碳化物类型、制备工艺、组织形貌、性能特点以及应用范围。
Effects of process parameters of plasma beam surface hardening treatment on hardening layer of boron cast iron and its microstructure and properties are investigated.
研究了等离子束表面硬化工艺参数对硼铸铁淬硬层及其组织与性能的影响。
The results showed that the alloy coatings can increase significantly the contact fatigue lifetime of alloy cast-iron gears. The microstructure and properties of coatings were also analysed.
试验结果表明：表面合金涂层能显著提高合金铸铁齿轮的接触疲劳寿命，文中同时分析了合金涂层的组织结构和性能。
In order to deeply comprehend the wear regularity of chilled alloy cast iron tappet, the influence of surface layer microstructure on wear resistance was studied.
为了深入了解冷激合金铸铁气门挺杆的磨损规律，研究了冷激合金铸铁气门挺杆表层组织对耐磨性的影响。
The effect of wind cooling on microstructure and mechanical properties of nodular cast iron (QT450-10) was investigated.
研究了风冷热处理对低牌号球墨铸铁(QT 450 - 10)组织和性能的影响。
The phase structure and microstructure of as-cast and quenched alloys were analyzed and observed by XRD and SEM.
用XRD和SEM分析了铸态及快淬态合金的相结构，并观察了合金的微观组织形貌。
The phase structure and microstructure of as-cast and quenched alloys were analyzed and observed by XRD and SEM.
用XRD和SEM分析了铸态及快淬态合金的相结构，并观察了合金的微观组织形貌。
应用推荐