Carbon nanotubes (CNTs) manufactured in a nano agglomerated fluidized bed by catalytic decomposition method usually group into agglomerates.
纳米聚团床催化裂解法制得的碳纳米管均以团聚体形式存在。
The super high strength, ductility, nanometer scale and large aspect ratio of carbon nanotubes (CNTs) make it an ideal reinforcement additive for composites.
碳纳米管极高的强度、韧性及其纳米尺寸和极大的长径比,使其有望成为复合材料理想的增强体。
As a new kind of carbon materials, carbon nanotubes (CNTs) have attracted considerable interest because of their unique structural, mechanic, electronic, magnetic and optics characteristics.
碳纳米管是一种新型的炭材料,具有独特的结构,特殊的力学、电学、磁学及光学性能,已引起人们的广泛关注。
Carbon nanotubes (CNTs), which are functionalized by biomolecules and possess biocompatibility and special recognition function, have the great potential application in biosystem.
利用生物分子功能化碳纳米管,使其具备生物相容性和特殊的识别功能并引入生物体系是一项极具应用潜力的研究。
The function modification of carbon nanotubes has been obtained by mixed acid and thionyl chloride treatment, spectral analysis present a contrast between treated CNTs and untreated ones.
分别采用混酸和氯化亚砜处理,实现了对碳纳米管不同的官能化修饰,并对处理前后的碳纳米管进行了光谱分析。
The geometric structure of carbon nanotubes (CNTs) is introduced, the symmetry of zigzag and armchair CNTs is analyzed and these symmetry elements are abstracted and summarized.
在讨论了碳纳米管的几何结构的基础上,对齿型和椅型碳纳米管的对称性进行了分析并将这些对称元进行了抽象和总结。
Carbon nanotubes (CNTs) have unique electronics and optical properties which destine them to play a major role in the next generation of nanoscale electronic and optoelectronic devices.
碳纳米管因其独特的结构和奇异的电学性能在下一代纳米电子和光电子器件中具有广阔的应用前景。
Carbon nanotubes (CNTs) were deposited by hot filament CVD and their structures were investigated by scanning electron microscopy and transmission electron microscopy.
用热丝化学气相沉积制备了碳纳米管,并用扫描电子显微镜和透射电子显微镜研究了它们的结构。
Carbon nanotubes (CNTs) have some special physic properties which may own important technical values.
碳纳米管具有一些特殊的物理性质,其中潜藏着重要的技术价值。
Since carbon nanotubes (CNTs) have been discovered in 1991, they are mainly produced by arc-discharge evaporation and Chemical vapor Deposition (CVD) method.
纳米碳管自1991年被发现以来,目前主要的制备方法有电弧法和化学气相沉积(cvd)法。
Carbon nanotubes (CNTs) are a new type nanoscale carbon material, they have a lot of potential applications.
碳纳米管是一类新型纳米炭,具有很多潜在的应用价值。
Carbon nanotubes (CNTs) are considered to be good adsorbents to remove organic pollutants from water.
碳纳米管是一种具有广阔应用前景的吸附材料。
Carbon nanotubes (CNTs) samples have been synthesized by many different method. They almost have impurities, such as amorphous, carbon nanoparticles and catalyst particles.
各种不同方法制备的碳纳米管样品,大部分含有无定形炭,碳纳米颗粒和催化剂等杂质。
The remarkable structure-dependent properties of carbon nanotubes (CNTs) have attracted much attention due to their potential in applications of various new areas.
碳纳米管由于其独特的结构与优异的性能,在许多领域具有巨大的应用潜力,已引起了广泛的关注。
Because carbon nanotubes (CNTs) have unique structure, large specific surface area, good thermal and chemical stability, they are considered as good support for catalysts and adsorbents.
碳纳米管具有独特的结构、很大的比表面积,而且具有很高的热稳定性和化学惰性,因此它被认为是一种良好的载体。
Chapter 2 Owing to their unique structure and special properties, carbon nanotubes (CNTs) recently have attracted much scientific interest in the field of material.
第二章:由于其独特的结构与性能,碳纳米管成为近几年来备受关注的明星材料。
Synthesis of aligned carbon nanotubes (ACNTs) is a key technique in the field of carbon nanotubes field emission display (CNTs-FED).
定向碳纳米管的制备方法是碳纳米管场发射显示器技术领域一项十分关键的技术。
In this paper, we explore the possibility of carbon nanotubes(CNTs)being used in IR detection, and discuss the proximity-induced superconductivity in single-walled carbon nanotubes (SWCNTs).
具体阐述了碳纳米管用于红外探测的可行性以及在单壁碳管内实现超导态的实验方法。
The growth of CNTS( carbon nanotubes) by catalytically cracking ethylene in the presence of the supported catalyst doped with rare earth samaria is reported.
稀土催化剂是一种稳定性好、选择性高、很活泼的催化剂,在石油的催化裂解方面得到了广泛的应用。
Large area well-aligned carbon nanotubes (CNTs) were synthesized in flames by applying an electric field.
在火焰区周围施加电磁场可稳定重复地制备出大面积形态良好的直立碳纳米管。
In this paper, ferric iron nano-particles were prepared by sol-gel auto-combustion and used as the catalyst of carbon nanotubes (Cnts).
利用溶胶一凝胶自蔓延燃烧法制备出了纳米氧化铁,并用其作为碳纳米管制备的催化剂。
Carbon nanotubes (CNTs) grown directly on graphite substrate are fabricated firstly using electrodeposited iron particles by chemical vapor deposition. Most of CNTs have "y" junction structure.
首次以电沉积铁为催化剂,采用经典化学气相沉积技术在石墨基体上成功实现纳米碳管的直接生长,大部分纳米碳管具有“Y”形结构。
Carbon nanotubes (CNTs) need to be either directly grown or assembled on a conducting substrate for the measurement of their field emission properties.
要实现碳纳米管优异的场发射性能,或者在基体上直接生长碳纳米管,或者把碳纳米管组装到某一基体上。
Firstly, the significance of investigation on hydrogen storage in carbon nanotubes (CNTs) is indicated, and the hydrogen storage capacity of CNTs can be enhanced obviously by transition metal-doping.
首先,揭示了研究碳纳米管储氢的意义,指出通过对碳纳米管进行过渡金属掺杂能够有效地提高其储氢量。
Carbon nanotubes(CNTs) have been thought as one of the most promising cold cathode materials of electron field emitters in field emission display(FED).
场发射阴极材料、场发射阳极荧光材料、隔离柱材料以及器件封装工艺是场发射显示器(FED)的三大核心技术难题。
Carbon nanotubes(CNTs) have been thought as one of the most promising cold cathode materials of electron field emitters in field emission display(FED).
场发射阴极材料、场发射阳极荧光材料、隔离柱材料以及器件封装工艺是场发射显示器(FED)的三大核心技术难题。
应用推荐