Theoretical analysis and calculation method are given in detail, and part of experimental results are presented.
文中给出了详细的理论分析和计算方法及部分实验结果。
Finally, the analysis and comparisons with other experiments and theory calculation are presented, the results indicate that our experimental results have better compatibility with documents.
将所得实验结果与国外实验结果及理论计算结果进行了对比与分析，实验结果与资料值有较好的一致性。
The calculation results of simple examples also illustrate the scientific rationality and importance of the analysis and calculation of the reactive power cost.
简单算例的计算结果也进一步说明对无功成本进行分析计算的科学合理性和重要性。
A design method for low phase noise agile X-band frequency synthesizer is presented, the theoretic analysis and calculation is performed and the test results are given.
介绍一种低相噪、捷变频x波段频率综合器设计方法，并进行理论分析、计算，最后给出测试结果。
In the design of MEMS, the resolution model of every essential device, the accurate numeric analysis and calculation are required to achieve more precise and rational analyzed results.
在MEMS器件设计中，综合各基本器件的精确分析结果，才能保证设计的合理性与准确性，这就需要建立器件的解析模型，并能够对其进行精确的数值分析与计算。
The calculation and analysis results of key steel structures are obtained. The correctness of the theoretical analysis is verified by mechanical test on some important points of the beam.
得出主要钢结构的计算分析结果，并对其关键部分进行力学测试，验证了理论分析的正确性。
Comparative analysis of the results come from finite element program calculation and "code of reinforced concrete silo design" is carried out.
对有限元程序计算结果与钢筋混凝土筒仓设计规范方法计算结果进行了对比分析。
Based on analysis results, a formula for the calculation of restraining moment of single-plate connection between steel truss (steel girder) and RC wall is derived.
本文根据分析结果拟合得到了适用于钢桁架或实腹钢梁与混凝土墙体之间连接约束弯矩的计算公式。
Research results: This paper puts forward the analysis and calculation methods, structural requirements, displacement and deflection value and passenger comfort requirements for elevated station.
研究结果：提出高架车站的分析计算方法、构造要求、位移与挠度限值及旅客舒适度要求等。
The test analysis and calculation results further proved the exactness of the reliability calculation method and the stability of the roadbed slope in test section.
由试验分析和计算结果进一步验证了试验路基边坡的稳定性及可靠性计算方法的准确性。
The results from calculation and analysis can provide a technologic basis in the design of VIM for the underwater cable in towed array sonar.
这些计算数据和分析结果，为线列声纳阵水下拖缆隔振段的设计提供了技术依据。
Analysis and calculation results provide the theoretical guidance and reference to the actual construction.
分析计算结果为实际施工提供了理论指导和参考。
Finally, the experiment results gained from the FBG sensor system and traditional PZT sensor are both validated by Finite Element Analysis (FEA) calculation.
最后，光纤光栅振动传感系统和传统压电陶瓷传感系统的实验结果还得到了有限元计算结果的验证。
The surfacing process test is introduced. Based on the analysis of test results and the calculation of dilution rate of surfacing layer, the reasonable surfacing specification is selected.
介绍了堆焊工艺试验，在分析试验结果、计算堆焊层稀释率的基础上，选定了合理的堆焊工艺规范。
Finally, the trim calculation and response analysis were carried out with the example helicopter's data. The simulation results validate the rationality and validity of modeling theories and methods.
最后采用算例直升机数据，根据提出的建模方法进行了定直飞行的配平计算和操纵响应分析，仿真结果证明了建模理论和方法的合理性和有效性。
Based on the analysis results of the relational literature, put on a reality analysis and calculation.
根据有关文献中给出的故障树分析结果，进行了实际分析计算。
The author has applied the modified transition model into the practical flow field calculation, compared the calculation results and obtained some significant analysis results.
作者将修正的转捩模型应用到实际流场计算中，对计算结果进行了比较，从中得到了一些有意义的分析结果。
The results show that using suspension grade (SG) model makes the calculation and analysis results of the suspension velocity of particle more accurate.
结果显示，采用悬浮分级模型提高了颗粒悬浮速度的分析和计算精度。
This paper presents the results of calculation of a column model with different meshes and the results are compared with those obtained from the theoretical analysis.
介绍了对不同粗细网格的立柱模型用有限元法进行计算的结果，并和解析法的计算结果作了对比。
The results show: using DCST to obtain results of the calculation corresponds to the traditional analysis method and is adapted for more complex models.
结果表明，利用DCST所得到的计算结果与传统的解析法结果相一致，而且可以适应更复杂模型的计算。
The predictions of vibration and response of object ship structure obtained by using analysis and calculation method described in this paper have good consistency with real ship testing results.
本文采用的分析计算方法对目标船结构振动及响应预报值，与实船试验数据具有很好的一致性。
Eventually we find the theoretical calculation and analysis are consistent with the experimental results.
理论计算分析和实验结果相吻合。
Based on discussion of attached plate and analysis of beam elements calculation results, a experience formula is deduced for the calculation of a beam elements inertial moment.
基于对梁元带板问题的讨论及对大量梁元的实际计算结果分析，推导出梁元惯性矩计算的经验公式。
Intermediates and transition states are confirmed by the results of vibration analysis and IRC calculation.
振动分析和IRC计算结果都证实了中间体和过渡态的真实性。
Finally the trim calculation and response analysis are carried out with the example helicopter's data. The results validate the rationality and validity of the model.
最后采用算例直升机数据，进行了定直飞行的配平计算和操纵响应分析，结果证明了模型的合理性和有效性。
The results of the calculation and the analysis of effects of combustion chamber pressure, mixture ratio, propellant injection temperature and injector type on the combustion processes are reported.
文中报告了特种发动机燃烧室压力、混合比、推进剂喷注温度和喷注器结构对燃烧过程影响的计算及分析结果。
The temperature calculation and simulation analysis is introduced in detail. Moreover, the calculation results and test results are compared, which verifies the feasibility of the simulation.
详细介绍了温度计算及仿真分析，并将计算结果与试验结果进行了比较，验证了仿真的可行性。
Using the results from finite element analysis of turbine rotor suppressed in heat stress, and simplified theoretical calculation equations, a mathematical model is established.
采用汽轮机转子热应力的有限元分析结果和简化的理论计算公式，建立汽轮机转子热应力的数学分析模型。
Using the results from finite element analysis of turbine rotor suppressed in heat stress, and simplified theoretical calculation equations, a mathematical model is established.
采用汽轮机转子热应力的有限元分析结果和简化的理论计算公式，建立汽轮机转子热应力的数学分析模型。
应用推荐