Mechanical analysis and calculation of the truck's metal construction are made by the matrix method, and the strength, rigidity and stability of the metal construction are checked.
运用结构力学的矩阵分析法和计算机对抽芯作业车主体金属结构做了力学分析与计算，进而校核主体金属结构的强度、刚度和稳定性。
In this paper the intensity and rigidity of the ambulance body structure are calculated by establishing the calculation model for its finite elements and then the results are analyzed.
本文建立了急救车车身结构的有限元计算模型，对车身结构的强度和刚度进行了计算，并对计算结果进行了分析。
This paper mainly discusses the structure design, internal force analysis and calculation on strength and rigidity of the conveyor triangle frame.
本文主要介绍该输送机三角形支架的结构设计、内力分析、强度和刚度的计算。
As a result of calculation, there are indication that the strength and rigidity are enough under the specified weight.
计算结果表明，车体在规定的重量下具有足够的强度和刚度。
A mixed scheme based on fixed mode expansion and power series expansion is suggested to simplify the calculation of the condensed dynamic rigidity of a structure.
本文提出一种基于模态展开和幂级数展开的混合方案，用于简化结构凝聚动刚度的计算。
This thesis aims at developing a model and calculation method of rigidity, strength and vibration of the blade .
本文目的就是要建立一套适合于水轮机转轮叶片刚强度与振动的分析模型和计算方法。
This paper introduces basic formulas of elastic vibration of conveyor belt and the calculation of its vibration coefficients e. g. cylindrical rigidity and modulus of elasticity.
本文介绍高速输送带弹性振动的基本公式，阐述我国目前常用几种输送带的圆柱刚度和杨氏弹性模量等振动系数的计算法。
The mechanics model of whole process of reinforced concrete beam section flexural rigidity is founded, based on the theoretical analysis the corresponding numerical calculation program is developed.
建立了钢筋混凝土梁截面抗弯刚度全过程分析的力学模型，在理论分析的基础上编制了相应的数值计算程序。
Working condition of ejector has been analyzed and a more rational calculation formula for ejector diameter has been given on the basis of principle of rigidity reliability design.
应用刚度可靠性设计的理论，对顶杆的工作情况进行分析，提出了一种更加合理的顶杆直径计算公式，并将其用于实际生产。
Through model testing of the building, it has obtained cracks, rigidity, and ultimate bearing capacities, as well as the calculation methods and formulas of the structural system.
通过带混凝土筒组合墙、开洞组合墙等模型试验，得出组合墙的开裂、极限承载力的计算公式和混凝土筒—组合墙承载力及刚度计算方法。
The article introduces the calculation of bearing area, flat-capillary size, pressure in the Chambers and the rigidity of the hydrostatic bearing throttled by using flat-capillary.
本文介绍了用扁毛细管节流的液体静压轴承的支承面积、扁毛细管尺寸油空压力及轴承刚度等计算。
On the basis of the calculation of compressed roller area and the rubber rigidity test, the authors give a method of calculating the elastic pressure of offset rollers and the waveform of time domain.
在胶印机胶辊压缩区域面积计算和胶皮刚度测试的基础上，给出了一种计算胶辊弹性压力及其时域波形的方法。
This paper tells the calculation and test results of the rigidity and strength of all-closed large underframes on depressed centre flat cars D18A. Several problems concerned are analyzed.
本文介绍了D_（18A）型凹底平车全封闭式大底架结构刚度、强度的计算和试验结果，对与此有关的若干问题进行了分析。
FEA ANALYSIS is used for the theoretical calculation of the rigidity of door leaf so that the safety, reliability and availability of sliding plug door system are ensured.
采用有限元分析法对门板的刚度进行理论计算，确保了塞拉门系统的安全性、可靠性和实用性。
The calculation of the interference of the cover and sleeve is as follows:secondary calculation and additional rigidity method.
计算链板和套筒的过盈应力的方法有：二次计算法和附加刚度法；
The performance requirement, composition of spindle unit and the rigidity calculation of spindle bearing and unit for CNC30 nc lathe are discussed in this paper.
介绍CNC30数控车床主轴组件的性能要求和组成，以及主轴轴承、主轴组件的刚度计算。
This paper puts forward the method of using the vibrating isolation ring to reduce noise, and advances the definite principle of the rigidity of the vibrating isolation ring and calculation formula.
提出了用隔振环来降低振动筛噪声的方法，以及隔振环刚度的确定原则和计算公式。
But no calculation has ever been given to find the foundation rigidity by this method, and therefore this paper presents our way of calculation for reference and discussion.
但运用该法如何求地基刚度的计算却不多见，故本文简要地列出我们推导的算式，以供参考与探讨。
The rigidity calculation of the closed thin - walled section rod structure of aircraft is carried out by using finite element method and the result tallies with the full - scale test value well.
利用有限元法对飞机闭合薄壁剖面杆结构进行刚度计算，其结果与全尺寸试验值吻合较好。
Fabric Stiffness Tester. To determine the bending height, flexural rigidity and bending modulus of fabric by simple procedures and calculation.
织物硬挺度测试仪，可通过简单操作及计算测出织物的弯曲高度、弯曲刚度、弯曲模量。
The calculation of top displacement of telescopic hydraulic cylinder and the evaluation of structural rigidity are emphasized.
着重讨论了伸缩液压缸顶端位移的计算以及对结构刚度的评定方法。
Abstract: Working condition of ejector has been analyzed and a more rational calculation formula for ejector diameter has been given on the basis of principle of rigidity reliability design.
文摘：应用刚度可靠性设计的理论，对顶杆的工作情况进行分析，提出了一种更加合理的顶杆直径计算公式，并将其用于实际生产。
When a girder becomes curved or deformed no matter whether we make a strength calculation or a rigidity calculation, the camber of a girder is always a very important measure.
梁产生弯曲变形时，我们无论是进行强度计算还是刚度计算，梁的弯矩都是非常重要的一个量。
Second, the calculation formula of radial rigidity is deduced according to the deformation of rollers under the radial load with axial position preload.
其次，由轴向定位预紧轴承受径向载荷时各滚子的变形，推导出轴承的径向刚度计算公式；
In designing a pontoon deck system which is made of light-weight and high rigidity material, strength calculation is one of the most concerned problems for designers at the beginning stage.
采用轻质高强铝合金材料设计舟桥的甲板时，其强度计算是初始设计者最为关心的问题之一。
The calculation result is safer by considering the improvement of rock rigidity under confining pressure, but the improvement can not make up the loss of rock rigidity caused by immersion.
由于考虑了围压对岩石刚度有提高的影响，非线性计算结果更安全一些，但这不足以弥补砾岩因泡水降低弹模带来的影响。
Taking roll system rigidity maximum as target function, the optimum calculation of roll system size has been carried out. The rational disposition methods of roll system is proposed in this paper.
并以辊系刚度最大为目标函数，对辊系尺寸进行了优化计算，提出了辊系尺寸的合理配置方法。
With the stiffness value of the damper, using cascade spring connection calculation method, the three direction rigidity and resonant frequency of the pod were calculated again with damper installed.
并根据减振器刚度值，利用弹簧串联刚度的计算方法计算了使用减振器系统的三向刚度和谐振频率。
Fabric by tester dull color. gives degrees operation and simple calculation out the fabric of bending height, bending rigidity, bending modulus. Standard: ERT 50-2 ASTM D1388 bs3356.
织物硬挺度测试仪，可通过简单操作及计算求出织物的弯曲高度、弯曲刚度、弯曲模量。标准：ERT 50 - 2ASTM D1388 BS 3356。
Fabric by tester dull color. gives degrees operation and simple calculation out the fabric of bending height, bending rigidity, bending modulus. Standard: ERT 50-2 ASTM D1388 bs3356.
织物硬挺度测试仪，可通过简单操作及计算求出织物的弯曲高度、弯曲刚度、弯曲模量。标准：ERT 50 - 2ASTM D1388 BS 3356。
应用推荐