Use the LEADS software to simulate the calculation of beam transfer, and show the envelope curve of beam transfer.
运用LEADS软件，进行了束流传输的模拟计算，并显示了束流传输包络曲线。
A method based on the transverse particle motion equation is described for the calculation of beam acceptance for RFQ accelerators.
基于RF Q加速器中束流横向运动方程描述了一种计算其入口处束流接受度的方法。
Through a calculation of the strength of normal section of extra-reinforced cantilever beam for an actual project, the conception of normal section of extra-reinforced cantilever beam is analyzed.
通过一工程实例中悬挑梁的正截面配筋计算，对钢筋混凝土悬挑梁正截面超筋的概念进行了分析和探讨。
Calculation method of kinematic parameters for the unusual shape beam pumping unit.
异形游梁式抽油机运动参数的求解方法。
The article have expounded the load acting on PC single track beam, and the calculation of curved PC single track beam including force, prestress and the stress etc.
阐述了作用于PC轨道梁桥结构上的荷载，曲线pc轨道梁的内力计算，预应力计算，应力计算及组合。
The theoretical design and calculation of the circular-section I-shaped beam shearing force sensor have been emphasized in this paper.
本文着重论述了圆截面工字梁剪力传感器的理论设计与计算。
According to the results of numerical calculation, the proximate formula of estimating radius of the beam was developed.
根据数值计算结果，提出一个计算束半径的近似公式。
The calculation and analysis results of key steel structures are obtained. The correctness of the theoretical analysis is verified by mechanical test on some important points of the beam.
得出主要钢结构的计算分析结果，并对其关键部分进行力学测试，验证了理论分析的正确性。
Through a large amount of calculation, the stress distribution Pattern of beam axle is obtained for some main load cases.
通过大量计算，对应于几种主要的载荷工况，得到了车桥横梁的应力分布规律。
This paper presents the principle of conjugate beam method which can be applied to the calculation of deformation.
本文介绍了用于梁变形计算的共轭梁法的原理，并举例说明了该方法的应用。
Based on the visual work principle of structure analysis, a general formula for the displacement calculation is deduced for the static analysis of the beam on elastic foundation.
根据结构分析中的虚功原理推导弹性地基梁位移计算的一般公式，介绍了连续弹性地基梁的静力分析方法。
Based on the generalized moving least square method, a new Element-Free Galerkin (EFG) double-variable approximation is applied to dynamic characteristic calculation and analysis of Euler beam.
以广义移动最小二乘法为理论基础，将同时考虑挠度和转角双变量的无单元法运用于欧拉梁的动力特性计算与分析。
Calculation results indicate that the vibration acceleration of beam and pier can be more effectively reduced with steel spring bearing.
计算结果显示，钢弹簧支座能更有效地降低梁体与桥墩的振动加速度。
Research purposes: This paper analyzes the effect of the lateral prestressing tendon in top deck on the lateral calculation result of box beam.
研究目的：研究顶板横向预应力钢束对箱梁横向计算结果的影响，给箱梁结构设计提供借鉴和帮助。
Based on fracture mechanics and theory of reliability, this paper offers the reliability calculation method for welded box beam having fracture.
根据断裂力学及可靠性理论，提出了一种起重机焊接箱形梁存在裂纹缺陷的可靠度计算方法。
Combining with the experiments of heat treatment, heat action results are compared by using fast calculation math tool of heat action of arbitrarily distributed beam.
并结合热处理实验，采用任意分布光束热作用快速计算的数学工具对热作用结果进行比较研究。
The application of geometrically nonlinear transition beam element can enhance the calculation precision of partial single-layer and partial double-layer reticulated shells.
过渡梁元切线刚度矩阵的提出，使局部单层局部双层网壳的计算结果更趋近于实际。
On the basis of test data from some references, it estimates the fracture reliability of the tested beam, the result indicates that the recommended calculation method is sort of valuable to reference.
并根据有关文献给出的试验数据，对试验梁的疲劳可靠度进行了估算，计算结果表明所推荐的计算方法有一定的参考价值。
According to the requirements of design and calculation, a feasible expert database of beam pumping units is established by collecting the dimension data of the existing pumping units.
根据设计计算的要求，搜集现有抽油机生产厂家生产的抽油机尺寸数据，建立了一套行之有效的游梁式抽油机专家数据库系统。
In this way, the calculation of the elastic foundation beam is further unified, which is very convenient to practical use.
这样，就进一步把弹性地基梁的计算问题统一起来，为实际应用提供方便。
Started from the analysis of connection form between prop end and pit on top beam and quantified calculation to analyze the cause of prop end deformation, points out the defect for design.
从分析立柱柱头与顶梁柱窝的结构形式入手，采取定量计算的方法分析了引起桩头变形的原因，指出了设计上存在的缺陷。
According to the calculation theory of normal section bending bearing capacity, the calculation formula of cracking moment of high-strength concrete beam was derived by the concrete mechanic method.
根据正截面受弯承载力计算理论，运用混凝土力学分析方法，导出高强混凝土梁的开裂弯矩计算式。
An improved calculation method on the local bearing compressive of end beam with rigid concrete cushion block is presented, which can provide reference for designer.
本文作者通过分析，提出了梁端支承处设有混凝土刚性垫块时砌体局部受压承载力计算的改进方法，可供设计时参考。
For the calculation of the crane box-style beam, which is generally very complicated, not only waste much time but also very easily make mistakes.
对于起重机箱形梁的计算一般比较复杂，用人工计算不仅耗时比较长，而且很容易出现错误。
The nonlinear equation of the guyed mast is presented based on calculation models of space cable and beam elements.
将桅杆结构离散为空间纤绳单元和梁单元计算模型，建立了桅杆结构非线性平衡方程。
Also propose some rational and effective calculation methods about cross beam calculation, and expound the problem of prestress reserve.
其中针对横隔梁的计算提出了几种合理有效的计算方法，同时着重阐述了横隔梁的预应力储备问题。
Based on discussion of attached plate and analysis of beam elements calculation results, a experience formula is deduced for the calculation of a beam elements inertial moment.
基于对梁元带板问题的讨论及对大量梁元的实际计算结果分析，推导出梁元惯性矩计算的经验公式。
The calculation on the residual capacity of RC beam post fire is on the premise that the member can use continue after repairing.
火灾作用后构件的剩余承载力的计算是以构件经修复后可以继续使用为前提的。
Objective To study the method for dose calculation and beam weight optimization of intensity-modulated radiation therapy (IMRT).
目的研究调强放射治疗(IMRT)剂量计算与射野权重优化方法。
Objective To study the method for dose calculation and beam weight optimization of intensity-modulated radiation therapy (IMRT).
目的研究调强放射治疗(IMRT)剂量计算与射野权重优化方法。
应用推荐