C computer language with CAD system software, improves the functions of CAD and make up some defects of CAD.
语言和CAD系统软件成功的结合在一起，拓宽了CAD的功能，弥补了CAD的缺陷。
CAD system software is developed based on hardware design of flexible fixture system. This system runs on an IBM PC microcomputer.
CAD系统软件的开发是以柔性夹具系统硬件设计为基础，该系统在IBMPC微型计算机上实现。
And the culvert CAD system software based on components was developed. The results indicate that this system has characteristics such as more adaptability, expansibility and eas...
在生产实际中的应用表明，该系统具有较强的适应性、可扩展性以及易维护的特点。
The paper introduces CAD system of steel tube cold drawing process which is a software with optimum function developed by Iron & steel General Institute on basis of computer imitation technology.
介绍了北京钢铁研究总院采用计算机仿真技术与计算机辅助设计技术，开发出具有优化功能的钢管冷拔过程CAD系统通用软件。
It is between the CAD model and RP system connection software.
它是CAD模型与RP系统之间的接口软件。
This paper discusses the structure, function and development principle of CAD software in hydraulic system developed by authors.
本文论述了作者所开发的液压系统CAD软件的结构、功能和开发原理。
As a professional application software, the hydraulic CAD system is a widely used assistant designing method in the hydraulic industry.
液压CAD系统作为一种专业应用软件，是液压行业经常使用的辅助设计方法。
To conduct Quadratic Developing of software on multi-platform of CAD, there are a lot of problems on the interfaces of CAD platforms and system maintenance.
在多个CAD平台上进行软件二次开发，要花大量精力考虑支撑平台的接口问题和系统维护问题。
This way, which connect advanced computer language with software for picture, simples inputting picture in CAD system of sectional die design greatly.
这种方法把图形软件和高级语言逻辑结合，大大简化了镶块模C A D系统设计中的图形输入。
The object"the CAD system for shaped milling cutter"is a project application software which works with computer aided design and parameterized modeling.
课题开发的企口铣刀CAD系统是一个利用计算机辅助设计和参数化绘图的工程应用软件。
The CAD system of casting process, including processing parameters, riser and gating system design modules, has been developed based on UG molding software.
在UG造型软件基础上开发了铸造工艺CAD系统，包括工艺参数设计、冒口设计和浇注系统设计等模块。
This paper introduces the ET2000 system which is the up-dated CAD software for garment, and puts forward the technology and attentive notes in using artificial intelligence when making plates.
介绍了第三代智能化服装CAD软件ET2000系统的特点，指出了服装打板时智能工具的使用技巧和应注意的事项。
According to the general approach on metro route profile design, it is founded that the architecture of the CAD software system of metro route profile which guide the MRPCAD system development.
根据地铁线路纵断面设计的一般步骤，建立了纵断面辅助设计软件的系统结构，指导MRPCAD的开发研制。
This paper presents a cold die CAD system based on drawing software CADtool made by China.
本文介绍了一套基于国产绘图软件的冷冲模CAD系统。
The dynamic characteristic of the EMP-LCA database and the integration between EMP-LCA software system and CAD are also realized.
实现了EMP -LCA数据库系统的动态性以及软件系统与CAD的集成等关键技术。
It introduces the makeup and modular function of the CAD system of Globoidal Indexing Cam Mechanism based on VB and the realization of the software system.
介绍面向VB环境的弧面分度凸轮机构CAD系统的构成、主要模块功能及软件系统的实现。
The heat exchanger CAD (HECAD) system is a CAD/CAE software developed for heavy-duty process heat exchanger.
热力系统换热设备CAD系统是针对重大过程换热设备而开发的CAD/CAE软件。
The two-dimension CAD and its software of low layer are being used to draw is very popular, but the three-dimensional CAD system of independent development is still immature in domestic.
国内在将二维CAD及其软件用于低层次的绘图很普及，但自主开发的三维CAD系统还未成熟。
The intelligent CAD system for hydraulic systems used in machine tools is a re-development of CAD systems based on SGI workstation and I-DEAS software.
本文就机床液压智能CAD系统的几个关键问题进行了研究，主要是在SGI工作站和I -DEAS软件平台上对CAD系统进行了二次开发。
The system greatly introduced the principle of software engineering and the optimizing ideology of CAD, as has greatly improved laneway design efficiency.
本系统的研制，充分运用了软件工程的设计原理和充分体现了计算机辅助设计优化的思想，大大提高了地下矿山井巷工程设计效率。
The realization method of shoe-last CAD/CAM system based on Unigraphics (UG) software was being studied.
采用离散设计方法和UG软件的点、线、面造型功能，实现鞋楦模型的建立和修改；
Using CAD software to draw a diagram of hydraulic system, hydraulic cylinder part drawing and assembly drawing of small excavator overall.
运用CAD软件绘制了液压系统原理图，油缸零件图和小型挖掘机的总体装配图。
In this paper, a CAD system for the high-power vehicle engine connection rod is researched, and the CAD software system is introduced.
基于工作站对大功率车用发动机连杆进行了CAD研究，介绍由此开发的一套CAD通用软件。
A description of CAD process is given after the hardware system and software system of CAD are introduced.
在说明实现槽形CAD的硬件系统及软件系统配置后，给出了一个槽形CAD过程的描述。
RP software system is a part of RP which starts with the CAD software system and ends in numerical control software system.
快速成型系统中的软件系统是指从CAD造型软件直至驱动数控加工所用软件的总称。
Post-processing of CNC machine tools is the important component of the CAD/CAM technology and NC programming system. Also, it is important way of compensating geometric error by software.
数控加工后置处理不仅是CAD/CAM技术和数控编程系统的重要组成部分，而且也是实现数控机床几何误差软件补偿的重要途径。
The CAD technology in micromachine rapid prototyping system is presented. The design of the slicing software for micromachine rapid prototyping system is discussed in detail.
介绍了微小机械快速成型系统中的CAD技术，详细讨论了微小机械快速成型系统切片软件的设计，为开发微小机械快速成型系统奠定了基础。
The solution put forward in this paper can satisfy system requirement appropriately. The PDM system integrates several different Computer-Aided-Design (CAD) software.
本文所提出的系统解决方案能较好地实现系统性能要求，能集成多种哈尔滨工程大学硕士学位论文以D软件平台。
This paper presents the feature modeling system based on a current business CAD software to build a full information of mechanical components.
为了建立机械零件的信息模型，本文介绍一种基于商品化CAD软件系统的特征造型系统。
On the basis of studying the 3D mapping in packaging CAD system, bring 3d mapping forward packaging CAD system for software of packaging decorate and realize it.
本课题从包装CAD系统出发，针对包装装璜软件设计提出将真实感贴图用于包装CAD系统中，并给予实现。
应用推荐