The DB2 Express-C support model lies within the strength of its community.
DB 2Express - c对模型的支持取决于其社区的能力。
Finally, the C-frame of semi-tubular SPR Machine for SPR was design and analyzed in respect of strength and stiffness with ANSYS software to ensure the rationalization.
最后，设计半空心自冲铆接机的C型铆接框架，应用ANSYS有限元软件对其进行强度和刚度分析，保证设计的合理性。
The influences of flyash, water reducer and W/C on the strength and brittleness of flyash paving concrete were investigated.
本文研究了粉煤灰、减水剂掺量与水灰比对粉煤灰道路混凝土抗压强度、脆性系数的影响。
The strengthening effects of C and V on high strength austenite stainless steel welds were studied.
研究了元素C、V对高强度奥氏体不锈钢焊缝金属的强化作用。
It was found that the damage area got by ultrasonic C-scan method will increase with the thickness increase, but the residual compressive strength will not be influenced obviously.
实验结果表明，厚度增加会使层合板内部的超声波c扫描损伤面积增加，但并不会明显影响其剩余压缩强度。
Rock shear strength value c, which reflects stratum lithology is the most fundamental factor, and it is affected by other factors.
地层岩性的抗剪强度指标是最根本的因素，且受其它诸因素的影响。
The chief architect of post war republican organizational strength into ohio was ray c. bliss.
战后组织俄亥俄州共和党力量的主将是雷儿布利斯。
The finite element method for the strength problem of C/M FGM underthe thermal shock loads is established.
讨论了梯度材料在热冲击下强度问题的有限元解法。
The existence of many great C++ libraries shows the size and strength of the C++ community.
存在如此众多的、了不起C++程序库，这件事情本身就表明了C++社区的庞大和强大。
The results show that the steel with 0.60%c possesses higher strength and hardness but lower plasticity, toughness and higher decarburization tendency.
结果表明碳、硅可提高强度、硬度。但含0.60%C的钢塑性、韧性较低，脱碳倾向也大。
Not to boast of my former beauty, or strength, or favour with ladies, &c.
不夸自己以前如何英俊，如何强壮，如何得到小姐太太们的青睐，种种。
The design method of C/G composite tail boom of an unmanned air vehical is detailed in this paper. The result of strength test of the tail boom is also introduced.
本文较详细地介绍了小型无人机C／G复台材料尾撑杆的结构设计和工程计算方法，并给出了静力强度试验结果。
When corticosteroids are prescribed, this should be at the lowest possible dose (level of evidence and strength of recommendation, 3 c).
应用激素时，应最小剂量。(证据级别和推荐等级，3C)。
Influence of CVD and LIC densification processes on mechanical properties, especially interlaminate shear strength(ILSS) of carbon cloth reinforced 2D C/C composites is studied.
研究了液相浸渍及化学气相法致密工艺对二维炭炭（2DC C）复合材料力学性能的影响，尤其是对层间剪切强度（ILSS）的影响。
The possibilities of the fracture mode type C were higher as the bonding strength increased.
C型断裂模式随着剪切强度增加出现概率也增加。
C-UV4111 is used to bond, seal metal or glass components with high strength and chemical resistance.
该产品在紫外光照射下固化，用于粘接和密封金属或玻璃元件并具有高强度和耐化学腐蚀性。
The metal has the highest melting point of all metals, and at temperatures over 1650 o C also has the highest tensile strength.
金属所有金属的熔点最高，并在超过1650摄氏度的温度下也具有最高的拉伸强度。
The network distribution of material C would make the matrix to withstand tensile stress and thus reduce the modulus and strength;
网络互穿材料的网络分布会使得基体承受拉应力从而降低模量和强度；
The increase of strength uneven in the course of drawing is the main c…
拉拔加工导致的强度不均匀性增大是发生分层的主要原因。
C. Time passed quickly. She went on working as hard as ever, not caring what she ate and not saving her strength.
日子很快地过去了，她的做工却毫没有懈，食物不论，力气是不惜的。
The diffusion of Ti, c, W of the substrate into the film improved the adhesion strength of the interface.
基体中的元素在薄膜中有明显的扩散，有助于提高界面结合强度。
The material cures when exposed to ultraviolet radiation. C-UV4111 is used to bond, seal metal or glass components with high strength and chemical resistance.
该产品在紫外光照射下固化，用于粘接和密封金属或玻璃元件并具有高强度和耐化学腐蚀性。
The material cures when exposed to ultraviolet radiation. C-UV5222 is used to bond, seal metal or glass components with high strength and chemical resistance.
该产品在紫外光照射下固化，用于粘接和密封金属或玻璃元件并具有高强度和耐化学腐蚀性。
With hardener K-35 forms heat curing epoxy adhesive characterized by outstanding mechanical strength even at 120 deg c.
与K - 35固化剂组合，形成热固化胶粘剂，即使120度也能保持很高的机械强度。
The specimen by route C ECAE processing was isotropic and its impact strength increased, tensile strength decreased, elongation at break improved and show…
经C路径的二次ECAE加工后试样为各向同性材料，其缺口冲击强度较PP有所提高，拉伸强度下降，断裂伸长率提高，表现出很好的延伸性。
Result: PTS-C includes 3 subscales: strength of excitation, strength of inhibition, mobility. PTS-C is composed of 72 items, with 24 items in each subscale.
结果：PTS -C问卷包括兴奋强度、抑制强度和灵活性三个分量表，每个分量表各2 4题，共72题。
The research of structural properties on prestressed concrete composite slabs with high strength screw p. c. wire are given in this paper.
文中介绍了以高强螺旋肋钢丝作为主筋的预应力混凝土叠合楼板的结构性能研究。
The research of structural properties on prestressed concrete composite slabs with high strength screw p. c. wire are given in this paper.
文中介绍了以高强螺旋肋钢丝作为主筋的预应力混凝土叠合楼板的结构性能研究。
应用推荐