Real world R-C circuit interact with each other.
现实世界中R-C电路会相互作用。
Some parameters affecting the frequency and magnitude of power supply, such as supply voltage, duty of control sigal. the R and C of oscillation circuit are discussed.
对影响放电电压大小及频率的电源参数进行了讨论，如供电电压、控制信号占空比、振荡电路的R和C等。
A new multifunction active-C filter is presented. The circuit is composed of four OTAs and two capacitors.
本文提出了一个新的多功能有源c滤波器，该电路由四个OTA和两个电容器构成。
Ohm's Law - relationship between voltage, current and resistance in D. C. circuit.
欧姆定律—在直流电路中，电压，电流与电阻的关系。
In this paper, a realization of active continuous time OTA-C filter with leapfrog structure is discussed and the formulas of circuit design are give.
本文讨论了使用跨导运放(OTA)和电容(C)实现跳耦结构的有源滤波器，给出了电路设计公式。
Disconnect Figure 3 c, d, the use of manometry to circuit (or leakage measurement method) to find the fault has shifted the cylinder.
断开图3中的C、D处，利用、回油路测压法(或测泄漏量法)找到了有故障的转向缸。
This paper simply mentions the function of TN-C system neuter line, the circuit analysis of two single-phase circuit in common the neuter line.
简述TN - C系统中性线的作用，两个单相回路共用中性线的电路分析，中性线断线后的危害以及在实际应用中需采取的保证措施。
The main C and D power amplifier PA example on the analysis of resonant power amplifier circuit as well as a practical circuit Comparative Study.
主要以丙类功放和丁类功放为例分析介绍了谐振功率放大器的电路组成并对实用电路进行了比较研究。
The paper introduces the measuring circuit of volts d. c. equipped with AT89C51 single-chip microcomputer and MAX197 data-acquisition system.
介绍由单片机AT89C51、数据采集系统MAX197组成的直流电压测量电路。
In this paper, methods are given to glove quality factor problems and quality factor is given precisely. In parallel L-C network circuit.
本文分析了一些常见电路的品质因数及其计算方法，并得出了实际电感、电容并联网络品质因数的精确结果。
The impedance formula of RL-C parallel resonance circuit is deduced theoretically, and some properties of resonance characteristic curve are analysed.
从理论上导出了RL - C并联谐振电路的阻抗公式，由此分析谐振特性曲线性质，并得出文献中引用的RL - C谐振特性曲线成立的充分条件。
The paper gives realization second-order OTA-C filter circuit structural and current transfer function of filter by researching the transmission property of multi-output CMOS trans-condutor.
通过对多输出的CMOS跨导器传输特性的研究，给出了实现二阶OTA—C滤波器的电路结构和电流传递函数。
For instance, a simulation showing the cardiovascular system modeled as a resistance-and-capacitance (R-C) circuit can be conveniently run from the web site.
例如，显示以电阻-电容电路对心血管系统的模拟，可便利地在网路上观看。
Skilled in assembly and C language programming, schematic design and PCB-layout and circuit debugging.
丰富的C语言和汇编语言开发经验，以及原理图设计，PCB设计和电路调试经验。
By taking the rectangular metal patch on a printed circuit board as the radiation element and by cutting a C-shaped slot in the rectangular patch, a frequency band notch is implemented.
该天线采用印刷电路板上的矩形贴片作为辐射单元，通过在矩形贴片上开一个C形槽来实现陷波功能。
The traditional three factors method ford-c first-order linear circuit is only one special example of the new method being discussed.
应用四要素法对周期信号和非周期信号激励的一阶电路作了较详细的分析；
C. Circuit Court of Appeals gave them no support.
特区上诉巡回法院当时不给予支持。
Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components; Rules for d. c. circuit - breakers.
铁路设施。机车车辆用电气设备。第3部分：电工元件。直流断路器规则。
In typical R-L-C resonance circuit, the 555-time-circuit and mercury relay are used as control unit. A damped sinusoid source is designed. It has been proved that the source satisfies our request.
在典型的R LC振荡放电电路中，引入5 5 5时基电路和水银继电器作为控制电路，设计了阻尼正弦瞬变信号发生器。
C. (circuit) analysis is undertaken. For the easy and popular of the using, a interactive mode in chinese character displaying is used. The users are guided to ent…
本程序力求做到方便用户，只要使用者有一定电路理论基础，即可在汉字提示下输入电路参数业得到需要的响应。
This paper proposed a new current-mode OTA-C network configuration, the high-order current transfer function are realised on the circuit.
提出了一种新的电流模式OTA-C网络结构，由此实现了高阶电流传递函数。
The terminals T and T' of the capacitor C are also connected to a circuit which contains a device R which is to be operated, and a circuit-controlling deviced as described above.
终端的T和T'的电容器C同样还连接着一个其中包含一个装置R就是运行的回路，还有一个电路控制装置d如上所述。
The paper presents the circuit structure type of the D. C. inductor in high power thyristor exciting system and the role of the D. C. inductor in the exciting current self-regulation control system.
本文论述了直流互感器在大功率晶闸管励磁系统中线路结构形式以及在激磁电流自动调节控制系统中所起的作用。
The USL unit forms part of an automated line for inspection of assembled printed circuit boards, which includes automated optical, thermal and X ray testing as well as ultrasonic C scan examination.
USL负责的单元是在线检测印刷线路板，该系统包括光，热，及X射线检测，同时还有超声C扫描检测。
The vacuum circuit breaker and three-position disconnector are designed for C-GIS and special micro-computer controller for the three-position disconnector is developed.
介绍了C-GIS用真空断路器及三工位隔离开关的设计技术；运用微机技术开发了专用的三工位隔离开关控制器；
Cross Talk between parallel Microstrip lines due to Electric Field coupling for different R-C values Compared with weak coupling and zero source resistance assumption in the culprit circuit.
弱耦合及干扰源为零电源电阻与其他情况下平行微带线间电场耦合之串音比较。
In the closed position of the circuit-breaker, the opening and closing spring are in charged state. This means the circuit-breaker is in a position to perform O-C-O switching sequences.
在断路器的合闸位置，分闸弹簧和合闸弹簧处于储能状态，此时开关可执行分-合-分操作。
In the closed position of the circuit-breaker, the opening and closing spring are in charged state. This means the circuit-breaker is in a position to perform O-C-O switching sequences.
在断路器的合闸位置，分闸弹簧和合闸弹簧处于储能状态，此时开关可执行分-合-分操作。
应用推荐