By using numerical simulation, this paper forecasts the interior ballistic performance of a gun.
通过数值模拟，预测该炮的内弹道性能。
The braid river sand body geometry shape could be forecasted by using numerical simulation method.
利用砂体沉积过程数值模拟方法可以预测辫状河砂体的几何形态。
Method Steam injection development and well pattern of horizontal Wells were studied by using numerical simulation.
方法利用数值模拟方法，对水平井注蒸汽的开发、布井方式等进行研究。
Furthermore, the research approaches were also given by using numerical simulation method and experimental simulation method.
还提出采用数值模拟与实验模拟相结合对该模型进行求解的研究思路。
The effects of technical factors on melting process of ferrosilicon in liquid iron are studied by using numerical simulation.
用数值模拟方法研究了工艺因素对硅铁在铁液中熔化过程的影响。
It is very important to establish effective reaction kinetic mechanism by using numerical simulation of turbulent combustion.
湍流燃烧数值模拟中建立有效的反应动力学机理是非常重要。
In this paper, the stability of the inclined stope in CanZhuang gold mine is discussed by using numerical simulation methods.
本文用数值计算的方法对蚕庄金矿倾斜矿房的稳定性进行了分析，其结论对矿山生产是有价值的。
The effect of the blocked spouts on the performance of an attitude control rocket motor was analyzed by using numerical simulation and test.
通过数值模拟和试验研究，分析了喷口遮挡对姿控火箭发动机性能的影响。
Full detail knowledge during forming process can be given by using numerical simulation, which could support for process design and dies optimization.
利用数值模拟方法，可以明确整个成形过程的全部细节问题，为工艺设计和模具优化提供强有力的支持。
The mathematical model experimental study about velocity field in a car-bottom heat treating furnace is carried out by using numerical simulation technology.
利用数值模拟技术，对台车式热处理炉的速度场进行了数学模型实验研究。
The quench model under the condition of conduction cooling system was established and the quench propagation properties were studied by using numerical simulation method.
建立了导热冷却条件下的超导带失超模型，用数值模拟的方法来研究超导带的失超传播特性。
The mechanical properties of segment linings for deep and long tunnels of west route of South-to-North Water Transfer Project are analyzed by using numerical simulation method.
为了研究盾构法隧道管片衬砌结构强度的历时老化和衰减及其服务寿命的预测问题，提出了对其进行耐久性设计的一种基本方法。
By using numerical simulation method, this paper mainly researches the influence of variable intake manifolds on intake flow characteristics and performance for gasoline engine.
本文主要通过数值仿真方法研究了进气管可变技术对汽油机流动特性及其性能的影响。
The new phenomenon of 3ccd irradiated by laser was illustrated by the theory of Fourier optics. In the mean time, the new phenomenon was calculated by using numerical simulation.
利用傅里叶光学的成像原理解释了激光辐照3ccd的新现象，并通过数值模拟的方法模拟了激光辐照3ccd的新现象。
The paper has quantitatively studied the evolution history of coalbed methane (CBM) of main coal seams in Liulin Mining Area of Hedong Coalfield by using numerical simulation method.
运用数值模拟方法对河东煤田柳林矿区主煤层煤层气地质演化史进行了定量模拟研究。
The size and regularity of train loads was obtained by field test, the effects of train dynamic load acting on the retaining structure was analyzed by using numerical simulation method.
对列车荷载进行现场测试，得出列车荷载大小及规律，借助数值分析的手段，分析列车动载对偏压基坑围护结构的影响。
The transonic turbulent flow around a blunt nosed and short body at large angle of attack was calculated and analysed by using numerical simulation method to solve the full N S equations.
采用数值模拟求解NS方程方法计算与分析了绕大钝头短体外形的跨音速大迎角时的湍流流动。
In this paper, the stability of the inclined stope in CanZhuang gold mine is discussed by using numerical simulation methods. The obtained results are valuable for the production of the mine.
本文用数值计算的方法对蚕庄金矿倾斜矿房的稳定性进行了分析，其结论对矿山生产是有价值的。
We investigate the method to create the noise field of the underwater by using numerical simulation. The method has been applied to designing the optimal array gain of underwater acoustic array.
研究了在水声基阵设计中用数值模拟产生海洋环境噪声场的方法及其在水声基阵最佳加权系数和最佳阵增益设计仿真中的应用。
In this paper, a method for modifying linear forecasting model to potential analysis forecasting model is discussed, and the distribution of forecasting value is given by using numerical simulation.
本文讨论把线性预测模型修改成势分析预测模型，并用数值模拟方法给出预测值分布的方法。
Secondly, the reservoir numerical simulation model is developed by using gridding technology integrated with production performance.
其次应用网格粗化技术，再结合生产动态建立油藏数值模拟模型；
By using the VIP simulator and a two-layer model, for the first time, the numerical reservoir simulation for the cyclic flooding have been studied.
利用VIP模拟器和两层地质模型首次进行了周期注水的油藏数值模拟研究。
Warm-hot control forging process of automobile spline shaft is investigated by using physical simulation and numerical simulation.
采用物理模拟和数值模拟相结合的手段，对汽车花键轴的温热控制精锻工艺进行了深入的研究。
A simulation study was made of the centrifugal stresses exerted on a grinding wheel by means of a visual numerical simulation technique, using the FEM software ANSYS.
应用可视化数值模拟方法，借助于大型通用有限元软件ANSYS建立砂轮回转的数学模型，对离心应力进行了仿真研究。
This paper discusses the numerical simulation method for oscillation reactions by using MATLAB, and studies nonlinear kinetic phenomena of sulfuric reactions.
作者讨论了使用MATLAB对振荡反应进行数值模拟的方法，应用该方法对硫化学反应非线性动力学行为进行了模拟。
By using CFD numerical simulation method to calculate the flow field of various programs, we find the key factors that have impact on the efficiency of the section of the flow field.
通过利用CFD数值模拟计算方法对各种方案进行流场的计算，我们发现了影响该段流场流动效率的一些关键因素。
By using computer simulation and numerical computation of OTF, the image property is analyzed for the case of different annular lenses and detector in confocal scanning system.
用计算机模拟和光学传递函数数值计算，分析了采用不同环形透镜及探测器对系统成像特性的影响。
The numerical simulation results are also presented by using of computer, the numerical results are consistent with the theoretical ones.
计算机数值模拟的结果与理论分析的结果相吻合。
Finally, this paper has made microscopic specimen rupture simulation for coal samples of meso-experiment by using of numerical simulation software RFPA.
最后，利用RFPA数值模拟软件对试验所做煤体试件进行了细观破裂过程模拟。
By using field observation and numerical simulation method, the influence of fracture structure plane on the underground pressure and the roof stability of working face are systematically studied.
通过对现场观测和数值模拟分析，系统研究了断裂结构面对回采工作面矿压分布和顶板稳定性的影响。
应用推荐