Furthermore, some researches that were difficult or unable to be done systemically by experiments were carried out by this simulation method.
另外,在此基础上对实验中难以进行或者不能进行的一些研究进行拓展。
This paper presents a mixed self adaptive design method by taking the state MRAC scheme from a reference model. It gives a detailed theoretical derivation and simulation proof.
在从参考模型取状态MRAC方案的基础上,提出了混合自适应设计方法。文中给出详细的理论推导和仿真验证。
We investigate in this paper the mechanism of energy transfer in homonuclear diatomic molecular solid system by the computer simulation with molecular dynamical method.
本文应用分子动力学计算机模拟方法研究同核双原子分子晶体体系的内部传能机制。
The numerical simulation procedure by this method is presented on the construction procedure of a pit.
用该方法对基坑施工的工程进行了数值模拟。
The feasibility and validity of this method is demonstrated by computer simulation and the reconstructed image.
计算机模拟得到了很好的再现结果,证明了该方法的可行性和有效性。
The model and method for estimating circuit design reliability by using digital simulation are established. A simulation example of the typical fuze circuit is given in this paper.
给出了设计可靠性的建模方法和用数字仿真评估设计可靠性的模型方法和仿真过程并给出了一个典型电路的仿真实例。
This paper discusses similarity criterion in similarity theory, and how to derivate similarity criterion of mathematics simulation model by dimensional analysis. A example for this method is given.
讨论了相似理论中的相似准则,以及如何用因次分析法推导数学仿真模型中的相似准则,并举例说明了这种方法的实用性。
This paper rebuilds traditional method by simulation of management processes and it makes maximum profit become true.
本文用管理过程模拟的思路改造了传统方法,实现了利润最大化目标。
This method of simulation can be developed by using a series of space data processing technology based on platform of information integration.
模拟的相关技术和方法可在信息集成平台的基础上,基于一系列空间数据处理方法开发实现。
The analytical skill of structural analysis can be enhanced by this method which combines dynamic simulation analysis, thermal analysis and static analysis.
通过动力学分析、热分析和静力分析的有机结合,对该类型结构计算进行了有益补充。
This paper strives to provide an important numerical simulation method for the practical engineering implementation by means of modern fire resistant design based on calculation.
力求通过基于计算的现代耐火设计,为实际工程实施提供重要的数值模拟方法。
The simulation results indicated that this sequencing method could reduce the total delay of the system as much as possible, by setting the weights for main factors which affect aircraft sequencing.
仿真结果表明,模糊综合评判排序方法通过设置各因素权重,可在综合考虑各因素的基础上使得系统总延迟尽量减少。
Simulation shows that it is of use for study on simulation method of target geometry modeling and wake guidance by applying this software in engineering field.
仿真应用结果表明,本项研究对于目标几何建模和尾流自导仿真方法研究具有实际应用价值。
This paper illustrates the process of analysis and design of automatic train operation by use of object-oriented method, and completes the software design of this simulation system.
本文采用面向对象的设计方法,对列车自动驾驶仿真平台的分析与设计进行了详细论述,并完成了系统仿真软件的设计。
The simulation results show that the tracking error of middle-convex and varying ellipse piston linear servo drive system can be reduced effectively by this method.
仿真结果表明,采用这种控制策略可以十分有效地减小中凸变椭圆活塞直线伺服驱动系统的跟踪误差。
A coaxial hybrid wiggler free-electron laser (FEL) amplifier with and without plasma filling is studied by a method of PIC simulation in this paper.
采用PIC模拟方法对同轴混合铁磁摇摆器自由电子激光器进行了研究,分析了等离子体填充对其性能的影响。
According to the fractal character and the self-resemblance of the plant morphology, this paper deals with the method of the plant morphology simulation by using fractal L-system.
根据植株形态的分形特征及其自相似性,阐述了应用分形l -系统理论模拟植株形态的方法,从而为植株形态的三维计算机模拟提供参。
The simulation of physical vapor deposition by Monte Carlo method using a new physical model is presented in this paper.
运用蒙特卡罗方法,模拟了不同条件下的物理气相淀积薄膜生长过程。
This paper discusses the numerical simulation method for oscillation reactions by using MATLAB, and studies nonlinear kinetic phenomena of sulfuric reactions.
作者讨论了使用MATLAB对振荡反应进行数值模拟的方法,应用该方法对硫化学反应非线性动力学行为进行了模拟。
The necessity of carrying out numerical simulation by different stages and the corresponding method of it for high water cut period is put forward in this paper.
针对油田高含水期的特点,提出了划分阶段进行数值模拟的必要性和分阶段数值模拟方法。
The effectiveness of this method was verified by a simulation experiment for a typical radar servomechanism.
对于一个典型的雷达天线伺服模拟系统,通过实验说明本文方法是有效的。
At last, this new method is verified to be feasible by the computer simulation.
最后,计算机模拟证实了新方法的可行性。
The S matrix measurement method is studied by this simulation process, and a special software for S matrix measuring is also debugged with this process.
对消磁系统S矩阵测量过程和分析方法进行了仿真研究,调试了S矩阵专用测量程序。
By using numerical simulation method, this paper mainly researches the influence of variable intake manifolds on intake flow characteristics and performance for gasoline engine.
本文主要通过数值仿真方法研究了进气管可变技术对汽油机流动特性及其性能的影响。
The optimization process condition is researched by the method of simulation, and bring up the usage scope of this method.
并用模拟法进行了部分氧化工艺优化条件的研究,提出了这一方法的使用范围。
Grid analysis method in physics simulation was programmed by this algorithm to use to simulating the deformation of experimental grids in different phases of the sheet forming.
基于本算法,提出了塑性成形物理模拟中的网格分析法,真实地模拟板料在冲压变形过程中各试验网格的变形情况。
In this paper, based on scalar diffraction theory, light fields in the coherent optics system have been calculated by the spatial tracing simulation method that USES FFT.
利用标量衍射理论,对相干光学系统中光场进行空间追踪模拟,该方法可以对光学系统中激光光场的分布进行预。
A decentralized LQG control scheme is proposed by using inclusion principle. The simulation results are given by this method for this distance bias control design.
利用包含原理,提出一种分散L QG控制的设计方法,并给出利用该方法对距离偏差控制进行设计的仿真结果。
By the test in the results of simulation or digital design, the results show that compared with traditional methods, this presented method has higher efficiency.
通过对仿真和数字化设计模型数据进行检验,结果表明,采用此方法比传统方法更有效。
The superradiance mechanism in RBWO was studied systematically by associated method of particle simulation and experiment in this dissertation.
本文运用粒子模拟和实验研究相结合的方法对相对论返波管中的超辐射机理进行了系统的研究。
应用推荐