Air polluted by the powder dust, paint mist and volatile solvent in the coating process will harm to health of people who breathe with the air.
人体呼吸的空气被涂装过程粉尘、漆雾和挥发性溶剂的污染直接危及人体健康。
By spraying and coating the potassium carbonate solution onto the surface of glass spheres, the layering growth mechanism of granulating process was studied in fluidized bed.
通过在流化床中将碳酸钾溶液雾化后喷涂在处于流化状态的玻璃珠上，研究了流化床造粒过程的层式生长机理。
With the view of the application in factory, the process of tin decorative coating coated by magnetron sputtering coater is emphatically discussed in this paper.
本文从工厂应用的角度着重讨论磁控溅射镀膜机镀氮化钛装饰膜的工艺问题。
By adjusting the proportioning of precursory constituent and controlling coating parameter and drying process and temperature, the authors had obtained the organic dye film with good optical quality.
通过调整前驱组份配比、控制涂膜参数和干燥过程及温度，获得了光学质量良好的有机染料薄膜。
By simulating the failure process of coating in different corrosion environment, a large number of electrochemical impedance test data has been collected.
针对不同的涂层体系，通过模拟其在不同腐蚀环境中的失效过程，获得大量的电化学交流阻抗测试数据。
The modified PVA coating process was studied by the crosslinking reaction of the active amino resin and PVA.
利用具备活性的胺基树脂与聚乙烯醇进行交联反应，对改性聚乙烯醇涂布工艺进行了研究。
Magnetic drum coating material was prepared by using the magnetic slurry inunction process and the influence of component on the property of coating material was investigated.
研究了不同组分的配方对磁鼓涂层材料性能的影响，制备出性能良好的磁鼓。
The paper illustrates the new automatic recovery technology and device that recover toluene from waste gas generated by cloth coating process.
文章介绍了从涂布生产废气中回收甲苯的新型自动化回收工艺和装置。
The unique abrasionproof corrosion protection powder coating is formed by an energy-saving manufacturing process and hot melt painting.
经节能制造工艺和热融涂复，形成独特的抗磨损耐 腐蚀的粉末涂层。
Zinc based RE alloy coating was obtained on the surface of steel samples by adding RE metal salts during the mechanical plating process.
通过在机械镀锌过程中添加不同量的稀土金属盐，在钢铁试样表面形成不同成分含量的锌基稀土合金镀层。
The paper analyses the cause which affecting diamond tools life, presents a new process of coating diamond by chemoplating-electroplating.
分析了影响金刚石工具使用寿命的原因；提出了金刚石表面化学镀- 电镀覆层金属新工艺；
It is a sophisticated process, performed under vacuum which deposits microscopic particles on the products by ion bombing or sputtering, to form a protecting coating on their surface.
这是一个复杂的过程，在充满微粒子的真空环境下对产品进行离子溅镀，以在产品表面形成保护层。
A golden yellow coating was obtained by immersion process on LY12 aluminum alloy surface. The process of cerium conversion coating at normal temperature was developed.
利用浸渍法在LY 12铝合金表面获得了金黄色的铈转化膜，确定了常温稀土(铈)化学转化膜成膜工艺。
In the article the process flow, reagents prescription for manufacture of water emulsion type waterproof coating by using spent polystyrene and test method of product performance were reviewed.
介绍了利用废聚苯乙烯泡沫塑料制备水乳型防水涂料的工艺流程、配方及其性能测试方法。
The tension control system has been proved fast, reliable and steady by realistic producing and it can realize the optimum control for the process of film coating production preferably.
经过实际生产运行证明，该系统张力控制稳定，实时性好，运行可靠，实现了镀膜生产的最优控制。
Detailed is the powder-coating process and principles of steel pipe by static electricity as well as the process of both chemical and mechanical pretreatment on steel pipe surface.
详细介绍了钢管粉末静电涂装生产工艺和原理以及对钢管表面进行化学、机械的预处理工艺。
The sulphuration coating was formed mainly by a chemical conversion, not only by a diffusion process.
硫化层主要通过化学反应和原子扩散过程而形成。
The process that makes high wear-resistant alloy coating on hackle screens by means of high frequency induction build-up welding which improves the service lives over 2 times are introduces.
介绍了采用高频感应堆焊方法在梳齿筛网表面制备高耐磨合金层以提高其使用寿命2倍以上。
The curing process of coating was discussed, and the affecting factors were discussed by means of testing on mechanical properties of the material.
对涂料的固化工艺进行了探讨，通过材料力学性能的测试，讨论了其影响因素。
The original surface of a steel specimen was identified by pure nickel so as to study the formation process of a vanadium carbide coating on the surface of the steel specimen through TD treatment.
利用纯镍标识钢的原始表面，研究了钢经td处理所产生的碳化钒覆层形成过程。
The I-CEWPU-2 cathodic electrophoretic coating with 60% solid content was prepared by improved process.
采用改进的工艺流程制备了固含量为60%的I -CEWPU - 2阴极电泳涂料。
The process can be used to apply coating film to the granules and pellets when they are in the state of suspending and fluidizing using airflow by fluidized-bed technology.
这种方法借助于流化床技术，利用气流使颗粒、微丸处于悬浮流化状态进行包衣的一种方法。
Our company also can process the anti-fog coating from the film material provided by the customer.
本公司也可以按用户来料加工成防雾片材。
The effect of sintering process and glass content on the coating properties was researched. A heat-resistant silicone resin is selected as a good coating of organic material by TGA and IR test.
将玻璃填料、有机硅树脂、溶剂等其它助剂按一定比例配制成高温涂料，进行耐高温性、柔韧性、干燥时间、附着力等性能的测试。
Stable spraying process and uniform and compact coating with high adhesive strength can be obtained by using the expert controller.
研制的等离子喷涂专家控制器可实现对常用喷涂粉末的稳定喷涂并获得均匀致密和高结合强度的等离子涂层。
The invention also relates to aluminium articles, provided with a copper coating, obtainable by said process.
本发明还涉及通过所述工艺获得的设置有铜涂层的铝制品。
This paper systemically introduced the features, principle, technological process and the application of coating materials, prepared by sol gel process, looked ahead the coming developing prospect.
较系统地介绍了溶胶凝胶法制备涂层材料技术的特点及一般原理。概述了溶胶凝胶法制备涂层的工艺过程以及涂层材料的应用。展望了未来的发展前景。
By effects we mean the finishing of the stone by means of a vacuum coating process. The various coating processes are illustrated in the Collection.
效果指水晶石经过真空涂层处理加工。阁下可在产品系列内找到有关各种涂层工序的阐释。
The harmfulness caused by corrosion of metal anode in electro-coating process was expounded. Corrosion reasons of anode were analysed and its protection methods were explored.
阐述了在阴极电泳涂装过程中金属阳极因腐蚀产生的危害，分析探讨了阳极的腐蚀原因及其防护方法。
The harmfulness caused by corrosion of metal anode in electro-coating process was expounded. Corrosion reasons of anode were analysed and its protection methods were explored.
阐述了在阴极电泳涂装过程中金属阳极因腐蚀产生的危害，分析探讨了阳极的腐蚀原因及其防护方法。
应用推荐