The perforation process of steel tube extrusion is simulated by finite element software.
利用有限元软件模拟钢管挤压穿孔过程。
The press straightening process of heavy rail was simulated and researched by finite element software of ANSYS.
利用有限元软件ANSYS对重轨的压力矫直过程进行了三堆有限元模拟，对重轨矫直过程中的弹塑性变形过程进行了分析。
Secondly, the model of deck pavement is analyzed by finite element software ANSYS to get its stress and strain distribution.
其次，本文使用ANSYS通用有限元策略对桥面铺装模型进行浅析浅析并得出它们的应力应变分布。
However, global structural stress and strain distribution can be calculated quickly, correctly and intuitively by finite element software.
而用有限元软件进行计算能够快速、准确、直观地得到结构上各部位的应力、应变等参数的分布情况。
In this paper, the influence of casing eccentric wear with different diameter on casing collapse resistance capacity was researched by finite element software.
文章主要运用有限元软件，研究了不同钻杆直径造成的套管偏磨对套管抗挤毁能力的影响。
Simulation analysis by finite element software DEFORM was done to optimize the extrusion die structure for manufacturing powder metallurgical molybdenum tubes.
为了优化粉冶坯钼管材挤压模具结构，应用DEFORM有限元软件对挤压工艺进行模拟。
In the design of three-bar truss structure commonly used for engineering, the optimization analysis is carried out for the structure by finite element software ANSYS6.
在对工程上常用的三杆桁架结构的设计中，利用大型有限元分析软件ANSYS6。
Transient dynamic analysis for the cutting part of shearer by finite element software ANSYS has been made, the law of vibration displacement is studied from the perspective of time response.
利用ANSYS有限元软件对采煤机截割部进行了瞬态动力学分析，从时间响应的角度研究振动位移规律。
This article introduced the the solution procedure of structure stress by finite element software ANSYS, represent the application of ANSYS, at last we finished the stress analysis of a gravity dam.
介绍了ANSYS有限元软件求解结构内力的过程，阐述了其分析应用，并完成了一个重力坝的内力分析。
Modeling program of cycloid profile contact finite element was finished by use of parametric function in I-DEAS software.
利用I-DEAS软件本身的参数化设计功能，编写了摆线轮齿面接触有限元建模程序；
The magnetic distribution of the single-coil and dual-coil magnetic rheological dampers with the same effective piston length was analyzed by using the finite element ANSYS software.
采用有限元ansys软件，分析了相同活塞有效长度下的单线圈与双线圈结构磁流变阻尼器的磁场分布情况。
The stator's characteristics of vibration and input impedance were analyzed by using the finite element software ANSYS. A new decoupling method between the two vibrators was presented.
对电机的运行机理进行了分析，并利用有限元软件ANSYS分析了电机定子的振动特性和阻抗特性，同时提出了一种振子间解耦的方法。
By using the large finite element method software MSC.
利用大型有限元分析软件Msc。
The driving wheel's axle is a key parts of the billet transport vehicle, so the axle's stress and deformation were analysed by the structure finite element analysis software ANSYS.
主动车轮轴是钢坯运输车的关键零部件，采用结构有限元分析软件ANSYS分析了该轴的应力和变形。
The differential equation can be solved by finite element technique, and the calculation process was done by the finite element technique software ANSYS.
应用有限单元法对温度场微分方程进行求解，计算过程借助有限元分析软件ANSYS完成。
In this paper, the static analysis of Hydroplan of hydropower station engineering of Xianrendong is performed by using the finite element software of ANSYS.
本论文通过有限元分析软件ANSYS对贵州省纳雍县仙人洞水电站的厂房工程进行了结构静力分析。
Furthermore, the method to analyze the damage of lining structure by current finite element software ANSYS is also valuable to other concrete structure and components.
文中论述的利用通用有限元软件ANSYS实现衬砌结构损伤分析的方法，对其它混凝土结构和构件的损伤分析也具有参考价值。
Simulated the typical ships broadside protection structure under the underwater contact explosion load by non-linear dynamical finite element software LS-DYNA.
采用非线性动力有限元软件LS-DYNA对典型舰船弦侧防护结构在水下接触爆炸载荷作用下进行数值仿真。
The calculation models of curved beam Bridges with same span length, but different curvature radius, center angles and supporting forms are established by means of finite element software.
利用有限元软件，建立了跨径相同、曲率半径和圆心角以及支撑形式不同的弯梁桥计算模型。
Lastly, the strength analysis of the guide frame, which is key part to link guide tire sets and vehicle body, is carried out by finite element method software (ANSYS).
最后利用有限元软件(ANSYS)对连接导向轮系和车身的关键部件——导向架进行应力强度分析。
In this paper, the numerical simulation on the wholly rolling process of trio cross wedge rolling has been finished, by using finite element software DEFORM.
本文通过DEFORM有限元软件理论建模，对三辊楔横轧整个轧制过程进行了模拟计算。
According to the basic structure and operating principle of wedge backstop, analyzes the wedge for mechanics and gives the finite element analysis by ANSYS software.
根据接触式楔块逆止器的基本结构及工作原理，对楔块进行力学分析，并利用ANSYS软件进行有限元分析。
The stress and temperature distribution were computed by the finite element software ANSYS for the two instances of steady operation and starting-up.
通过有限元软件A NSYS，分别计算了启动和稳态操作情况下， 加氢反应器筒体的温度分布和应力分布。
The finite element model of this sensor is built by applying the finite element analysis software ANSYS.
用有限元分析软件ANSYS建立了该传感器的有限元模型。
The heat load to the vacuum vessel thermal shield (VVTS) is analyzed by FLUENT finite element software in order to demonstrate that the design of cooling tubes is reliable.
采取有限元法对内冷屏的受热状况进行了计算分析，以验证内冷屏氦冷却管道设计方案的可靠性。
The heat load to the vacuum vessel thermal shield (VVTS) is analyzed by FLUENT finite element software in order to demonstrate that the design of cooling tubes is reliable.
采取有限元法对内冷屏的受热状况进行了计算分析，以验证内冷屏氦冷却管道设计方案的可靠性。
应用推荐