Method By FEM, the stress value and distribution were calculated and analyzed.
方法：采用三维有限元的方法建立力学模型，并计算分析应力分布特点。
The results by FEM are important to analyses the microstructure of the rod studied.
这一结果对于指导分析轧件的微观组织变化有重要意义。
The simulation of roll forming with multiple passes was studied by FEM software ABAQUS.
利用ABAQUS软件对多道次辊弯成形数值模拟技术进行了研究。
The optimization of casting process design was made by means of feedback achieved by FEM.
通过有限元模拟的反馈信息进行了铸件凝固工艺的优化设计。
The results achieved by FEM were stable, and irrelevant to coordinate system and reference plane.
用FEM进行人颅颌面生长发育研究，其结果是恒定的，与坐标系的选择和参照平面无关。
Based on the dam heel and toes stress calculated by FEM changes very much as the mesh size reduces.
在混凝土重力坝有限元应力分析中，坝踵和坝趾的应力随网格剖分尺寸的减小而急剧增大。
At the same time, the influence of all kinds of facts on load have been analyzed by FEM in detail too.
同时通过有限元模拟，对影响载荷的各种因素进行了分析。
The analysis of a bus chassis frame by FEM is now becoming an essential technique to design bus structure.
在汽车结构设计中，有限元分析法已经成为必备的技术手段。
The residual stress of the beryllium ring weldment was studied by FEM simulation and X ray stress measurement.
采用有限元分析法和X射线应力测试法对铍环形焊件的残余应力分布规律进行了研究。
The solidification process of liquid metal in the CASTEX technique was studied by FEM (finite element method).
利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。
The displacement calculated by FEM with parameters obtained from back analysis was close to the measured value.
利用反演得到的岩体力学参数进行有限元正分析所得位移与现场实测结果更加接近。
In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.
本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。
So the elastic - plasticity model is more compatible to slope stability analysis by FEM with shear strength reduction.
因此，弹塑性模型更适合于强度折减有限元法分析土坡稳定性。
The results analyzed by FEM indicate that the total aseismatic and bearing capacity of the building are great improved.
对加固后的建筑实际受力情况分析结果表明，达到了改善大楼总体结构性能的目的。
The composite foundation with rigid-flexible piles under strip foundation is analyzed by FEM on the basis of field tests.
在现场试验基础上对条形基础下刚-柔性桩复合地基进行有限元模拟分析。
It is proved by FEM analysis that the proposed shape and structure of the test box can avoid resonance with the model soil.
在选定模型箱结构的外形与构造时，借助有限元分析论证了可不与模型土发生共振的箱体构造；
The model was numerically solved by FEM, fully coupled for thermal-chemical model and one way coupled for the stress model.
其中热-化学模型可采用完全耦合的形式求解，而应力模型则可采用单向耦合的形式求解。
But a great number of data will be created in the process of simulation, especially in the multistep excavation simulated by FEM.
但是，有限元模拟基坑工程，尤其是对多步施工的基坑工程的模拟，产生了“海量”数据。
By FEM analysis for its intensity, rigidity and kinetics model, it has been optimized, practice shows that it is a successful design.
通过有限元对其进行强度、刚度及动力学模态的分析，并以此进行了优化设计。
In the paper, the problem of interaction between soil media and an underground round structure to explosive loading is studied by FEM.
应用有限元方法分析了在爆炸载荷作用下地下圆形结构与土介质的动力相互作用问题。
After the structure is analyzed by FEM, an algorithm of ply orientation Angle optimization and ply thickness optimization is presented.
文中首先对复合材料结构进行了有限元分析，在此基础上提出对复合材料层合板的铺层角度、铺层厚度的优化设计算法。
In this paper, the thermal elastic-plastic stresses of the components which underwent local high temperature cycle were analyzed by FEM.
本文对局部经受高温热循环构件的热弹塑性应力进行了有限元分析。
This paper summarized structure optimum design based lightweight on special heavy vehicle frame by FEM and mathematics optimization method.
采用有限元法结合数学规划法对重型专用车车架进行了轻量化结构优化设计。
The method of brittle coat is used to study reflective crack of asphalt pavement, comparing the experimental results with that gotten by FEM.
采用脆性涂层法研究沥青路面的反射裂缝，并将试验结果与有限元计算结果进行了比较。
The pressure gradient calculated by FEM, which is influenced by slippage effects under high pressure condition, is compared with that of mathematic model.
比较低渗透率情况下考虑高地层压力作用的滑脱流和原有的达西流对压力分布的影响。
To explore the influence of maximal internal pressure on forming tri-branch tube, the procedure of forming tri-branch tube is simulated by FEM software MSC.
以内高压成形三通管过程中最大内压的影响为研究目标，采用有限元分析软件MSC。
This paper investigated the KBSG9-3150 mining flameproof transformer developed by Hunan University and a transformer factory. The cabinet was analyzed by FEM.
在此背景下，本文以我校和某变压器厂联合研制的KBSG9-3150矿用隔爆型变压器作为研究对象，对其箱体进行了有限元分析。
The applicability of the restriction-equations method in smooth structures, cylinder with fixture fringe and shell with fixture seat is validated by FEM analysis.
通过有限元算例分析，验证了约束方程连接的体壳连接方法在平板结构、带安装边的圆壳结构以及带安装座的壳结构上的适用性。
Fuzzy evaluation method (FEM) is introduced into flue gas desulfurization technology (FGDT) and some kinds of representative FGDT are evaluated by FEM in this paper.
该文将模糊数学综合评判法引入电厂烟气脱硫，系统地利用模糊综合评判法对几种有代表性的烟气脱硫技术进行评判。
Comparing the results of the welding residual stresses at outer surface of beryllium ring by FEM to that from X ray stress measurement, the stress trend is identical.
对铍环外表面钎缝附近焊接残余应力进行X射线应力测试，并与有限元分析结果对比，二者应力变化趋势基本一致。
应用推荐